Question mark Hi , when i use the software came with the cam or the photo shop to download my Pictures from the cam to pc it appears as "Yellow Question marks" ... What can I do ... Thanks in advance

Connect the lead from the camera to the USB on your computer. If you have the Camera software on the computer, it will open up automatically. If you don't, you can view and move images using File Explorer in Windows which shows the camera storage as a 'Volume Drive'.

Hi..I would download the pics from your camera or a memory card to the desktop, then when in photo shop, look under file transfer, or import, and look for the desktop and find the file name of the photos you downloaded there from your camera...

Your computer must recognize your camera automatically,.
Go to control panel -- device manager and look if they are a device iht a yellow mark .
If have a yellow mark, select and rigt clik "uninstall"
Restart your PC
If don``t work

Try connect in another USB Port
Try connect in another computer
If don`t work, maybe the USB cable is failure

Is important for people who share their knowledge, know your comments.
If the answer is helpful, rate my answers

go to facebook, go to upload photos (either on your homepage or by going to your pictures) click browse and select each picture through the explorer box that opens when you click browse

Browse the photo gallery and click on your cam for support

http://www.logitech.com/index.cfm/405/&cl=us,en?prodcrid=405

We dont use the software which came with our cameras, we use picasa 3. Just connect camera to PC photos appear and then just click import to picasa. Then save pictures under "MY Pictures" under PC drive. Another thing to try when using camera software is to ensure that you are not connected to broadband at the time of downloading.

go To www.olympusamerica.com click on link for software downloads and then click the link to get the free download for Olympus Master 2. This is the new version of the photo editing software that will support your camera.

there is two ways to load pictures from your cam to pc:
step 1
youll need a card reader to put in the memory card to a usb port.
A.then the computer will recognize the device as a FLASH DISK/ REMOVABLE DISK.
B.some pc will automatically open once you inserted the card reader to the usb port "click open containing folder". if the pc does not open automatically open my computer and find the "flash disk/removable disk" and click.
C.once inside find the DCIM folder this contains your pictures taken from your cam.
D. now you can choose a picture you like to be transfered or copy to your PC
E. save picture in a folder that you ca easily remember

step 2
need a usb wire to connect cam to usb port
A. attach wire from your cam to usb port/pc
B. your cam will show options choose storage data. the other options requires a software
C.same as step 1 from B-E



here is the site for version 1.10:
http://drivers.softpedia.com/progDownload/Pentax-Optio-230-110-Download-16224.html

here is the site for version 2.1
http://driverscollection.com/?file_id=29747


i hope i was able to help you! good luck!

Hi speed USB Device attached to non Hi Speed Hub.... this message appears because the USB hub controller is not updated. Try to download USB 2 driver from the following. http://www.softwarepatch.com/tips/usb2-driver.html

Another application already using webcam--- for this error message... try this.. right click my computer. Properties-> hardware tab. -> device manager. check any abnormal marks like a yellow circle or yellow question marks in the cam . also check the COM ports.

get the adope photo shop from free download