Question about Samsung WF337AAL Front Load Washer

5 Answers

4E showing on Samsung Washing Machine

4E is showing on the Samsung Washing Machine.

The solution in the manual says:
"make sure the source water faucet is turned on; check the water pressure".

Checked this and looks fine. Any ideas please?


Posted by on

Ad

5 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 15,935 Answers

When error message 4E is displayed, you should clean the water hose mesh filter. To do this:

1. Turn off the water source to the washing machine.
2. Unscrew the hose from the back of the washing machine.
3. With a pair of pliers, gently pull out the mesh filter from the end of the hose and rinse it under water until clean. Also clean the inside and outside of the threaded connector.
4. Push the filter back into place.
5. Screw the hose back onto the washing machine.
6. Turn on the faucet and make sure the connections are watertight.


Also, please check the following:
• Make sure the source water faucet is turned on.
• Check the water pressure.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Posted on Sep 16, 2010

  • BigMarty11 Jul 20, 2011

    i had just had a 4E problem appear on my digital display samsung washing machine it appears as the technician tells me that the inlet valves burn out and so does the digital dash which cost me $506 to get repaired compared to the cost of a new washer $850 mind you this machine has just fallen out of the 2 years warranty by 5 months....people stay simple i think for now as he he also informed me that problems like this appear in every company models that he services with this digital memory and dashboards water this close to so much circuitry do not mix i hope it lasts longer than 2 1/2 years this time

×

Ad
  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I just fixed the problem
just moved house
Water wouldn't fill up for my Samsung machine and kept giving me 4e error msg
Manual said something about pressure so i moved drain hose that was draining to the drainage on the laundry floor to the sink so that the drain hose is going upward
Problem solved! Just like that

Posted on May 05, 2013

  • Rudy
    Rudy Jul 22, 2014

    E4 error is caused either by: 1) low input water pressure and thus filling the tub takes a very long time; or 2) water level sensor is not working or not able to tell water level in the tub. For #1, check water filter at point where water hose connects to the washing machine and make sure it is not clogged. Also make sure there is enough water pressure from the mains. For # 2, unplug the washing machine, open the back cover and check for a dislodged .5 cm diameter tube that attaches to the lower portion of the tub. That tube is connected to the water level sensor and with the shaking, it gets dislodged over time. Re attach it and your washing machine will work as before.)

  • Marc Farver
    Marc Farver Jan 01, 2018

    Very good depth on that pressure switch. Trying now and hope for success.

×

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Well, this nonsense about kinked hoses and clogged filter wasnt my problem...its the defective crimp bracket that holds the drain tube to the tub...with all the whirring and spinning, the darn thing slips off and water runs down onto the floor,,,the system detects that water isn't filling into the tub and kicks the 4E code. I just fixed this a second time (over 9 mos) and need to go off an get a tigheter crimp bracket...Samsung engineers design the length of this half-inch tubing so that is has very little give so incremental pull/pushes by the tub itself eventually pulls it off its tub connection. Just remove the 4 back panel screws and you should see on the lower right side if the tube is no longer connected (and by now just dripping water on the floor).

Posted on Jul 15, 2016

  • Steven Tan
    Steven Tan Oct 03, 2016

    Mind taking a photo on the crimp bracket ?

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Samsung Master
  • 744 Answers

Samsung WF337AAL Front Load Washer This video will help you diagnose the fault on 3e error codes and the video will help you solve the problem

Posted on Nov 28, 2015

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 139 Answers

Also if your cold water temperature is below 59 deg. F it will display code "4E" if the hot water is not connected. Auto temperature control function selects hot or cold automatically.
Regards
Phillip

Posted on Mar 26, 2015

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

  • 13 Answers

SOURCE: Washer keeps displaying '4E' Lack of water error

If you have pulled out and cleaned the filter at the back of the machine where the hose connects then I would check that your pump is not running during the cycle and also make sure your drain line is at least half way above your drum at its highest point, If its too low then it will drain off even if the pump is not running.

Posted on Apr 11, 2009

SOURCE: Samsung Washing machine fault

possibly a blockage at the end of the thin pressure hose where it fits onto drum ie;scale or soap powder. Also clean the chamber/hose it fits onto

Posted on Jan 16, 2008

  • 1 Answer

SOURCE: washing machine

Hey 4E error comes in case
1. No proper water supply
2. The Outlet pipe sould be at AT LEAST 60 CM to max 90 CM HEIGHT ie to the height of the washing machine, try putting the outlet pipe to the holder at the back of the machine.
rohityadav79@gmail.cm

Posted on Feb 03, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Explain erroe 4E


When error message 4E is displayed, you should clean the water hose mesh filter. To do this:

1. Turn off the water source to the washing machine.
2. Unscrew the hose from the back of the washing machine.
3. With a pair of pliers, gently pull out the mesh filter from the end of the hose and rinse it under water until clean. Also clean the inside and outside of the threaded connector.
4. Push the filter back into place.
5. Screw the hose back onto the washing machine.
6. Turn on the faucet and make sure the connections are watertight.


Also, please check the following:
• Make sure the source water faucet is turned on.
• Check the water pressure.

Jun 05, 2012 | Samsung WF337AA Front Load Washer

1 Answer

Describe your 4E problem in samsung front load Problem


When error message 4E is displayed, you should clean the water hose mesh filter. To do this:

1. Turn off the water source to the washing machine.
2. Unscrew the hose from the back of the washing machine.
3. With a pair of pliers, gently pull out the mesh filter from the end of the hose and rinse it under water until clean. Also clean the inside and outside of the threaded connector.
4. Push the filter back into place.
5. Screw the hose back onto the washing machine.
6. Turn on the faucet and make sure the connections are watertight.


Also, please check the following:
• Make sure the source water faucet is turned on.
• Check the water pressure.

Thanks for using FixYa!!

Sep 19, 2010 | Samsung WF203ANW Front Load Washer

1 Answer

Samsung model WF8602NHS showing error message 4E


When error message 4E is displayed, you should clean the water hose mesh filter. To do this:

1. Turn off the water source to the washing machine.
2. Unscrew the hose from the back of the washing machine.
3. With a pair of pliers, gently pull out the mesh filter from the end of the hose and rinse it under water until clean. Also clean the inside and outside of the threaded connector.
4. Push the filter back into place.
5. Screw the hose back onto the washing machine.
6. Turn on the faucet and make sure the connections are watertight.


Also, please check the following:
• Make sure the source water faucet is turned on.
• Check the water pressure.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question!!!!!

Sep 03, 2010 | Samsung WF306BHW High Efficiency Front...

1 Answer

I have a samsung 7Kg J845 front load washing mechine, when i turn on, water not fills enough ( only water fills couple of seconds after stops flows. the error shows 4E, Then i clean up all mesh filters...


When error message 4E is displayed, you should clean the water hose mesh filter. To do this:

1. Turn off the water source to the washing machine.
2. Unscrew the hose from the back of the washing machine.
3. With a pair of pliers, gently pull out the mesh filter from the end of the hose and rinse it under water until clean. Also clean the inside and outside of the threaded connector.
4. Push the filter back into place.
5. Screw the hose back onto the washing machine.
6. Turn on the faucet and make sure the connections are watertight.


Also, please check the following:
• Make sure the source water faucet is turned on.
• Check the water pressure.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Aug 08, 2010 | Samsung WF203ANW Front Load Washer

1 Answer

Error 4E + timer countdown is delaying


When error message 4E is displayed, you should clean the water hose mesh filter. To do this:

1. Turn off the water source to the washing machine.
2. Unscrew the hose from the back of the washing machine.
3. With a pair of pliers, gently pull out the mesh filter from the end of the hose and rinse it under water until clean. Also clean the inside and outside of the threaded connector.
4. Push the filter back into place.
5. Screw the hose back onto the washing machine.
6. Turn on the faucet and make sure the connections are watertight.


Also, please check the following:
• Make sure the source water faucet is turned on.
• Check the water pressure.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Sep 02, 2009 | Samsung WF337AA Front Load Washer

2 Answers

4E error....samsung J845


When error message 4E is displayed, you should clean the water hose mesh filter. To do this:

1. Turn off the water source to the washing machine.
2. Unscrew the hose from the back of the washing machine.
3. With a pair of pliers, gently pull out the mesh filter from the end of the hose and rinse it under water until clean. Also clean the inside and outside of the threaded connector.
4. Push the filter back into place.
5. Screw the hose back onto the washing machine.
6. Turn on the faucet and make sure the connections are watertight.


Also, please check the following:
• Make sure the source water faucet is turned on.
• Check the water pressure.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question!!!!!

Aug 23, 2009 | Samsung WF203ANW Front Load Washer

1 Answer

My samsung washing machiene keeps coming up with the error 4e. what does this mean?


When error message 4E is displayed, you should clean the water hose mesh filter. To do this:

1. Turn off the water source to the washing machine.
2. Unscrew the hose from the back of the washing machine.
3. With a pair of pliers, gently pull out the mesh filter from the end of the hose and rinse it under water until clean. Also clean the inside and outside of the threaded connector.
4. Push the filter back into place.
5. Screw the hose back onto the washing machine.
6. Turn on the faucet and make sure the connections are watertight.


Also, please check the following:
• Make sure the source water faucet is turned on.
• Check the water pressure.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question!!!!!

Mar 15, 2009 | Samsung WF337AA Front Load Washer

1 Answer

4E code keeps apearing


When error message 4E is displayed, you should clean the water hose mesh filter. To do this:

1. Turn off the water source to the washing machine.
2. Unscrew the hose from the back of the washing machine.
3. With a pair of pliers, gently pull out the mesh filter from the end of the hose and rinse it under water until clean. Also clean the inside and outside of the threaded connector.
4. Push the filter back into place.
5. Screw the hose back onto the washing machine.
6. Turn on the faucet and make sure the connections are watertight.


Also, please check the following:
• Make sure the source water faucet is turned on.
• Check the water pressure.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Jan 29, 2009 | Washing Machines

1 Answer

Samsung washer


When error message 4E is displayed, you should clean the water hose mesh filter. To do this:

1. Turn off the water source to the washing machine.
2. Unscrew the hose from the back of the washing machine.
3. With a pair of pliers, gently pull out the mesh filter from the end of the hose and rinse it under water until clean. Also clean the inside and outside of the threaded connector.
4. Push the filter back into place.
5. Screw the hose back onto the washing machine.
6. Turn on the faucet and make sure the connections are watertight.


Also, please check the following:
• Make sure the source water faucet is turned on.
• Check the water pressure.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Jan 28, 2009 | Samsung WF337AA Front Load Washer

2 Answers

4e code


I just checked the Samsung website - you can download the manuals if you've lost them (website below). Not sure what washing machine you have but a 4E on model J1043 (which is the machine I have) says to check the following:

i_1.gif Make sure the source water faucet is turned on.
i_1.gif Check the water pressure.

http://downloadcenter.samsung.com/content/EM/200701/20070109165927703/EN/J1043-01986D_sub7_eng_050708.htm

Hope this helps.

Dec 26, 2008 | Samsung WF337AA Front Load Washer

Not finding what you are looking for?
Samsung WF337AAL Front Load Washer Logo

21,678 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Washing Machines Experts

Jaime Hernandez

Level 3 Expert

2337 Answers

The Knight
The Knight

Level 3 Expert

76060 Answers

Paul

Level 2 Expert

381 Answers

Are you a Samsung Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...