Question about PC Desktops

1 Answer

Cd rom reading not accurate - PC Desktops

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: Cd rom reading not accurate

Dear teraz, first check the drivers of your cd rom are properly installed, if no install it again , and if yes check the cables of the cd rom of which is connected to the motherboard or change the cable. insha allah your problem will we solved

Posted on Sep 05, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

2 Answers

CD-Rom not reading cd's

it sounds like the cd rom driver in windows is not installed correctly try reinstalling the cd rom if that does not work the cd rom needs replaced

Sep 02, 2009 | Dell Dimension 4500S PC Desktop


What is the difference between DVDRW and DVD-RW?

Simply <br /><br />cd rom = read cd 700m only <br /><br />cd rw =read cd 700m and write on it <br /><br />dvd rom =read cd 700m and dvd 4.7g only <br /><br />dvd rw= read cd 700m and dvd 4.7 gb and write on it <br /><br />dvd compo= read cd 700m and write on it and read only dvd 4.7 not write <br /><br /><br />best regardes

on Apr 02, 2011 | PC Desktops

1 Answer

Optiarc dvd rw 7530B will read CD,CD-rom but No DVD, DVD-rom

it can read cd but not dvd isnt it. this cause your dvd rom faulty pls try borrow from somebody and replace it first see how ok

Jun 07, 2009 | PC Desktops

1 Answer

Cd rom does not read CDs.

The fasted and easiest way to eliminate Windows being the cause of a read problem is to remove the IDE cable from the drive and insert a CD into the drive once the system is powered on again. You should notice some change in the LED of the CD-ROM, at least it should blink for a few seconds. Usually if the LED goes out or turns red it would point towards a faulty drive - which you have already seem to establish.

One last shot to try before dumping the CD-ROM for good is to update the Firmware of the ROM drive - altough a long shot I have seen this work a number of times.

As Insomniac says CD-ROM's are very cheap to purchase these days

Insomniac I am remember when these ROM drives were very expensive - do you remember when the first Burners came out? As slow as a tractor and expensive as a Ferrari

May 09, 2009 | PC Desktops

2 Answers

Looking for.....

You will need a low profile dvd. Do you want a part and vendor?


Jun 21, 2008 | HP Compaq Business d530 Ultra-Slim PC...

1 Answer


this is a READ error known as a CYCLIC REDUNDANCY READ ERROR.
If the CD ROM is not able to read from the disc .. it gives u this error
This can come due to many reasons
1. OLD CD ROM - not able to read data properly
2. CD with lot of scratches
3. CD not written properly: Data not burn properly on CD at the time of its make.

Solution: Try to insert a new CD in it and then check whether it works or not
or get a CD LENS CLEANER DISC which will remove any kind of small debris on the lens on the CD ROM and then it will work.
This would surely help

Feb 19, 2008 | PC Desktops

1 Answer

Cd-rom drive

try to separate the ide cable. /

Feb 08, 2008 | PC Desktops

1 Answer


hard drives dont read cd's
does the door close?
if not close it.

1)left clik my computer
2)double clik the cd rom drive, making sure theres a disk in it.
3)right clik on my computer
device manager
look for a yellow exclamation point or red X where the cd-rom is.
high light the cd-rom
right clik
restart the computer
windows will detect and re-install the cd-rom drive.
try a cd

if that doesnt work update windows

also buy a cd-rom cleaner at your local electronics store
clean the drive w/th cleaner
try a cd

if updating your driver for the cd rom drive and all ive suggested then its time for a new cdrom drive

Dec 09, 2007 | Dell OptiPlex GX260 PC Desktop

1 Answer

CD ROM Won't work

First you want to make sure the CD you are using is good. Try a different CD-ROM, a known good one. If a different CD-ROM is readable then the problem is with your CD media and not the CD-ROM Drive. If another known good CD does not work then the problem is with the drive.

To fix this you must purchase a new CD-ROM drive and install it. has great deals. If you only want to read CDs and are not interested in burning then you can get a name brand CD-ROM drive for around $15.00, but if you need to burn as well the CD+-RW will run you about $30.00.

If you are using Windows XP then it is pretty simple to install the new CD-ROM drive.

Nov 20, 2007 | HP Pavilion a1330n (EL466AA) PC Desktop

1 Answer

Cd-rom dvd

CDROM CAN NOT READ CD'S Try cleaning the lens using a high grade CD Lens Cleaner.

Sep 21, 2007 | PC Desktops

Not finding what you are looking for?
PC Desktops Logo

Related Topics:

274 people viewed this question

Ask a Question

Usually answered in minutes!

Top PC Desktops Experts


Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers


Level 3 Expert

18258 Answers

Are you a PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides