Question about Kenmore 63822 / 63824 Bottom Freezer Refrigerator

2 Answers

Temperature control i want to RAISE the temperature in my fridge...every time i push the button pad on the front door it LOWERS the temp... i have tried pushing different parts of the button and all i am doing is lowering the temp MORE!!.. i now have frozen veggies! the manual tells me how to lower the temp but NOT raise it.kenmore elite trio 795.775326 help!

Posted by on

  • Macedonia May 03, 2008

    I have the Samsung RS2534 side by side and I read that in order to save energy the refrigerator temperature needs to be between 35 and 38 degrees Fahrenheit and the freezer at 0 degrees Fahrenheit so I tried to make the changes but it keeps moving back to 34 for the frig and -4 for the freezer which is too cold and uses more energy.



    How do I reset the temperature and get it to stay where I want it. I already tried holding down the child lock button and the temperature still moves back to 34 and 0.

  • Mike Gibson
    Mike Gibson Feb 18, 2014

    Anyone fixed this?? I have the same issue with the Kenmore Elite 596.7857 series French door style unit. If I could just reset to factory default at least then it would allow me to raise have a higher temp. It appears the button is broken.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 12 Answers

For the Kenmore, keep pushing the button and it should cycle back to the top of the temperature range.

Posted on Oct 05, 2008

I think u just keep pushing it and then it starts over again at the highest temp.

Posted on Jan 03, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Control on door has flasing lights, water and ice has stopped working


this appears to be the door switch is either bad or disconnected and has triggered an alarm mode to the display. If the unit is cooling ok then you should remove and check the switch with a meter.

May 29, 2014 | Maytag MFD2560HES Bottom Freezer French...

1 Answer

I can't get my AC to turn on. I'm house sittting, so I don't know the ropes of this AC system. The AC pad only has up and down buttons, but when I adjust them they just blink for a while and then go back...


Hi, on the thermostat there should be a door of flap that opens, pulls down to reveal more buttons such as Cool, heat, auto, off, on. Find these and they will either be switches or a touch pad. Turn it to cool and auto. You should be able to use the arrows to lower or raise the temperature at that time. It may say hold temp on it also. Set the temperature where you want it, lets say 75 and push hold temp. It should work for you now. Please let me know how it turns out or if you need more help.
Sincerely,
Shastalaker7
A/C, Heating, & Refrigeration Contractor

Aug 09, 2010 | Weather King 10AJA3601AH Air Conditioner

1 Answer

Fridge side wont cool properly.


Check out this link below for a PDF manual on your item. Great information to have. Just copy and paste into your browser.

http://www.samsung.com/us/function/search/espsearchResult.do?keywords=RS2630SH&input_keyword=RS2630SH

Try this:
Temperature Adjustment
• After 24 hours, adjust the controls as needed. Adjust temperature gradually: push the button in small increments,
allowing the temperature to stabilize.
• Press the button(Freezer Temp or Fridge Temp) repeatedly until the desired set temper.
• For lower temperature, press the button(Freezer Temp or Fridge Temp) towards coldest.
• For higher temperature, press the button(Freezer Temp or Fridge Temp) towards cold.

If this does not work for you let me know or you can contact Samsung support at 1-800-SAMSUNG (1-800-726-7864) Mon - Sun : 9am - 9pm (EST).

Or you can try this Live chat at this link below, just look to the middle left of their page for live chat:

http://www.samsung.com/us/info/contactus.html

Let me know how this works for you or if I can help you with anything else.
JimmyC

Oct 06, 2009 | Samsung RS2630SH Side by Side Refrigerator

1 Answer

How to start oven in PROPANE STOVE


Print the following infore for future ref if you wish. How it works is simple tage a look at it in Motion
Component Test Procedure Results
Electronic
range control
F1−1 –Upper Oven >650°F with door unlocked.............................
F1−2 –Lower Oven >650°F with door unlocked.............................
F1−3 –Upper Oven >950°F with door locked.................................
F1−4 –Lower Oven >950°F with door locked.................................
F1−7 –Membrane switch is not responding ...................................
F3−1 –Upper sensor is shorted at (< 100 ω) or
open at (>5 K ω) ...............................................................
F3−2 –Lower sensor is shorted at (< 100 ω) or
open at (>5 K ω) ...............................................................
Check actual upper oven temperature,
if > 650°F check sensor.
Check actual lower oven temperature,
if > 650°F check sensor.
Check actual upper oven temperature,
if > 950°F check sensor.
Check actual lower oven temperature,
if > 950°F check sensor.
Check membrane switch for connection or damage.
Check upper sensor, harness, and connections
Check upper sensor, harness, and connections
Engineering
Test Mode
Press BAKE pad.
Enter 100°F using the number pads.
Immediately push and hold BAKE pad for appropriate oven
approximately 3 seconds.
This mode can also be entered by pressing the hidden pad
for 3 second located to the left of the lower oven light pad.
Used to view the actual oven temperature for both ovens at all
times, even when an oven function is active.
This mode will also display the current fault code for 5
seconds in the time digits.
Fault codes
accessed
through
Engineering
Test Mode
F0−0 –No fault .................................................................
F1−5 –Upper hardware failure within control ....................
F1−6 –Lower hardware failure within control.....................
F1−8 –Shorted key in membrane switch ..........................
F1−9 –Internal communication errors within control .........
F1−A –Upper latch switches ............................................
F1−B –Lower latch switches.............................................
F1−C –Upper door switch.................................................
F1−D –Lower door switch.................................................
F1−E –Sensor input not calibrated ...................................
F1−H –EEPROM error .....................................................
F1−L –Temp in ovens are the same for long period .........
F1−N –Internal voltage on control not working .................
F9−1 –Upper lock switch is not correct.............................
F9−2 –Upper unlock switch is not correct.........................
F9−3 –Control does not see upper door lock....................
F9−4 –Lower lock switch is not correct.............................
F9−5 –Lower unlock switch is not correct.........................
F9−6 – Control does not see lower door lock ...................
EE –Control cannot read E-PROM. Unit will shut down.
Default from factory
Replace control
Replace control
Check membrane connection
Replace control
Check latch wire harness
Check latch wire harness
Check lock wire harness
Check lock wire harness
Verify sensor is operating properly
Replace control
Verify sensor is operating properly
Replace control
Check lock wire harness, and lock switch
Check lock wire harness, and lock switch
Check lock wire harness, and lock switch
Check lock wire harness, and lock switch
Check lock wire harness, and lock switch
Check lock wire harness, and lock switch
Disconnect power for 60 seconds. If EE reappears, replace ERC
Test Mode This mode must be activated within the first 5 minutes of
power up.
Press BROIL and CANCEL pad for approximately 3 seconds.
If oven temperature is greater than 400°F, the Test Mode
cannot be activated or will abort if active.
Press and hold individual pads for 4 seconds to activate.
Display will have dashes in all segments to indicate the mode is
active.
Upper Bake: Energizes upper bake element
Lower Bake: Energizes lower bake element
Upper Broil: Energizes upper broil element
Convection Bake: Energizes convection fan
Upper Oven Light: Energizes upper oven light
Lower Oven Light: Energizes lower oven light
Upper Clean: Energizes upper motorized door lock
Lower Clean: Energizes lower motorized door lock
Stop Time: Energizes Beeper
Cook Time: Displays error codes
Timer 1: Energizes ROM version
Timer 2: Energizes EEPROM version
Keep Warm: Cooling Fan
Clock: All display segments light
If functions do not perform as specified, replace ERC
Oven
temperature
adjustment
Push BAKE pad.
Enter 550°F using the number pads.
Immediately push and hold BAKE pad for appropriate oven
approximately 3 seconds.
To decrease or increase oven temperature. Push AUTO SET
pad until negative or positive numbers appear. Oven can be
adjusted from -35° to +35° (-37.2° to + 1.6° C) in 5° F (2.7° C).
To avoid over adjusting oven move temperature -5° each time.
Push OVEN CANCEL button.

Sep 04, 2009 | Frigidaire 30 in. Electric Gallery Series...

1 Answer

'99 eddie bauer, cold air in the rear hot air in


you may just be low on freon. The rear will often work ok when low, but the front won't

The same compressor serves both front and rear systems. Check that first.

ALso, check to see if your front blend door rotates when you raise & lower the temperature.

report back on results

May 09, 2009 | 1999 Ford Expedition

1 Answer

I cannot get the oven to come on after I used the self cleaning.


Things to check- The screw in fuses, they are usually the 30 amp fuses for the oven. Next is the clock assembly, often these clocks will have the words "push for manual" or "turn for manual", this will put the clock back into the normal operating mode rather than the automatic mode. Next, you may have to remove the power and check for any burnt wires. If all checks ok, you will have to test the selector switch and oven control.
 Oven temp problems: Temperature is too low possible trouble makers, blown oven fuse, bake element is out, burnt wire, oven probe clips, oven temp control, oven temp sensor.
Temperature is too high in the oven possible trouble makers, oven temp control, oven relay ( if used ), oven probe clips, oven temp sensor, shorted wire.
These oven probe clips often rust off and the oven temp probe hangs down, or touches the oven wall giving false temperature readings to the oven control.

Apr 01, 2009 | Whirlpool RBS275PD Electric Single Oven

2 Answers

Refrigerator and freezer temperature control


hi. thanks for te question. since you asked the question. has your fridge settled down and cooling sometimes the fridge will set itself

Sep 24, 2008 | Kenmore 73502 / 73504 / 73509 Bottom...

1 Answer

Control pad flashing temp and all lights continuously and ice door continually cycles open and closed


Hi,
With the problems it is presenting, I would say it's very likely.
However it may take a bit of detective work to find which board is defective.

Check a part suppliers link Here for price comparison so you have some ideas.

Jun 26, 2008 | Kenmore TRIO 77314 Side by Side Bottom...

5 Answers

Samsung french door fridge not working?


I had the same problem ("OF" on display and not working) and just found a fix and it worked (on SAMSUNG site).It was correctly stated that fridge is in "demo" mode. You need to push and hold POWER FREEZE and ENERGY SAVER buttons (not "Fridge button and the Power Cool buttons" as it was suggested above).

Oct 14, 2007 | Samsung RM255LASH Side by Side...

Not finding what you are looking for?

Open Questions:

0 Answers

Fridge won't cool below 40 degrees F, freezer won't cool below 25 Kenmore refrigerator model 596.79279993, mfg # P1325019WB,serial 0009119112, 21.7 cubic ft, freezer on the bottom model. Condenser coils are totally clean and condenser fan is running. Condenser coils feel close to ambient temperature (not noticably warm). Evaporator coils (located in the rear of the freezer compartment behind a sheet metal cover) are frost free and the evap fan is running. Air is blowing from freezer into frig like it is suppose to. Return air passage from frig to freezer is clear. Compressor runs continuously, surface is about 10 degrees warmer then ambient, it sounds normal and slight hum can be felt. Lights in frig and freezer shut off when doors are closed - like they should. Defrost timer rotates as time passes. Today I emptied the contents and unplugged. I removed the back panel in the freezer compartment to inspect. The evaporator coils were totally frost free. Let the unit sit for six hours with doors open with a fan blowing inside - no condensate formed anywhere, nothing in the drip pan. I then turned it back on. The suction tube exiting the evaporator coil became frosty in 5 minutes, but the frost never spread more then a few inches after several hours of running. The temperature in the frig is now + 40 degrees and freezer is + 25F degrees even though both controls are set at maximum cold setting (7) and it has ran 8 hours with nothing in either compartment. Unit is 9 years old and has worked fine until two weeks ago when I noticed the food in the freezer was not frozen very solidly (temperature was 25 degrees F). Any thoughts? Freon low? Anything else I should check or test witha multimeter?

Feb 28, 2017 | Kenmore 63822 / 63824 Bottom Freezer...

Kenmore 63822 / 63824 Bottom Freezer Refrigerator Logo

Related Topics:

253 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Refrigerators Experts

John Tripp
John Tripp

Level 3 Expert

4654 Answers

minguy15

Level 1 Expert

15 Answers

mike cooper

Level 3 Expert

884 Answers

Are you a Kenmore Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...