when i turn my computer on it goes to a page that says the copyright and the specs of computer at the bottom it says 30:setup power managment it stays on that screen
Few possibilities is that the bios is attempting to detect devices such as hard disk/cd rom through IDE or SATA. make sure all cables are connected properly and try again. It may also help to unplug both ends of the IDE/SATA disks/cd and use an air compressor or compressed air to blow out any dust and reconnect the cables.
my compaq persario 6000 needs to be restored, i have lost the floppy drive needed what can i do. ...
(More)
my compaq persario 6000 needs to be restored, i have lost the floppy drive needed what can i do. I've tried using a repair program but it says the C: partition1 is unknown and cant use this area.
I made a ecovery disk and it loads and then works, at the botom it says examining 19092 and I'm...
(More)
I made a ecovery disk and it loads and then works, at the botom it says examining 19092 and I'm pretty sure it freezes. What should I do?