Question about Sony FD Trinitron WEGA KD-27FS170 TV

1 Answer

Unable to channel to channel 3

I am unable to manual change my channels. it is bouncing from channel 6 to 117. i need it to stop at channel 3.

Posted by on

  • marg1944 May 26, 2008

    We have an old Sony and it was working we turned it off and when we turned it back on we are unable to get channel 3. If we manually touch the up and down switch it goes to 60 then 12. Our original remote is lost.

    We are hooked up to Star Choice but this only controls the channel changes for the satellite.

  • Anonymous Aug 18, 2008

    i have a sony trinition 32 inch tv and i can't tune digital channels.can you help me please.

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 398 Answers

If you take a working remote, point it at the TV and hit "3", then "ENTER", does the set go to channel 3?

Posted on Sep 04, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Iam unable to find why the tv is skipping from channel 2 -9leaving us unable to view 3/4/5/itv2.Is ther a possible transmitter fault


Your TV may be unable to detect the presence of a signal on those channels. Retuning could be necessary.

Dec 22, 2017 | Televison & Video

1 Answer

I have DCA analyzer from Siemens healthcare and i have problem E24 ,How Can Solve it


Manual is available in PDF format from here

http://docslide.us/download/link/dca-operators-guide


http://docslide.us/download/document/?id=%2FJKJQj2KkZIjS9Tn4Jm5CAbRibVv%2BGl%2BT9wi7I03ZyGSjZf8c1bXQnPy2%2FSc3BFIu8t3mvccp4VXj23OQyX8pQ%3D%3D

DCA Vantage Operator's Guide 109
Troubleshooting
E22 - Optical
reading is out
of range
A Sample or Reference
channel reading taken
during an Air
measurement is too
high.
1. Discard the sample.
2. Run an optical test.
3. If you are unable to run an
optical test, contact your local
technical support provider.
E23 -
Excessive
noise on the
Sample
channel
The standard deviation
of the 16 readings at the
Sample channel for Dark
or Air reading is too
large.
1. Discard the sample.
2. Run an optical test.
3. If you are unable to run an
optical test, contact your local
technical support provider.
E24 -
Excessive
noise on the
Reference
channel
The standard deviation
of the 16 readings at the
Reference channel for
Dark, Air or Sample
reading is too large.
1. Discard the sample.
2. Run an optical test.
3. If you are unable to run an
optical test, contact your local
technical support provider.
E26 -
Excessive
noise in sample
reading
The standard deviation
of the 16 readings at the
Sample channel during a
reading taken is too
large in Sample read
position.
1. Discard the sample.
2. Run an optical test.
3. If you are unable to run an
optical test, contact your local
technical support provider.
E27 -
Excessive
Lamp Drift
The change in mean
signal between
successive Air readings
is too large at either the
Sample channel or the
Reference channel.
1. Discard the sample.
2. Run an optical test.
3. If you are unable to run an
optical test, contact your local
technical support provider.
E30 - Thermal
control system
error - low
The temperature
measured by one of the
cartridge holder
thermistors is ?2?C.
1. Discard the sample.
2. Restart the system.
3. If you are unable to perform a
successful restart, contact
your local technical support
provider.
E

Sep 21, 2015 | Siemens Dishwashers

1 Answer

Technika tv


You might need to set up the channels in the menus. Try auto scanning the channels. Read you operating manual on setting up the TV.

Oct 23, 2013 | Televison & Video

1 Answer

I'm trying to set up the TV channels for the View Sonic 2750. I'm unable to program channels 3 & 4 to allow the cable converter box to work. The cable channels start at 181 and stop at 90 the air...


try using the number keys on control an manually program numbers in that way, if you select auto tune, it will only try to program any channel it gets signal for, once you type the numbers in that way, it should ask you to save that channel number, in which of course you select yes... try that, also refer to owner manual or mfg website.

Oct 17, 2010 | ViewSonic N2750w 27 in. HD-Ready LCD...

1 Answer

Unable to change channel DIR-615


IF NO PROBLEMS , WHY YOU ARE UP-TO CHANGE CHANNELS. IF YOU DID NOT STOP FINGERING HABIT THE ROUTER YOU WILL MESS IT UP AND WILL NOT POST ANY QUESTION ON FORUMS.

Apr 11, 2010 | D-Link DIR-615 Wireless Router

1 Answer

Purchased a Zenith TV (model #Z20LCD1 Serial #609TPAE12392} the directions nor a remote was in the package. I am unable to change channels and it is on Channel 11 an ETV channel. When I go to the menue,...


For changing language you need to go to the Special Menu Options. While on the menu select the one on the far right (past audio, picture menu options). Second line in special menu is the one to select Language, you can change it to english there.

https://www.manualslib.com/manual/376266/Zenith-Z15lcd1-15-Lcd-Hdtv.html?page=19#manual

Jan 18, 2018 | Zenith Televison & Video

1 Answer

Quasar vhq41m


Hi , set remote to auto program set enter /on sreeen will appera then stop if no channel appear ,then select channel.

Jan 21, 2008 | Quasar VHQ400 VHS VCR

2 Answers

VCR model VHQ 41m


I have not heard of one that doesn't have the selector switch to change to 3 or 4, Could it perhaps be in the front behind a door or just somewhere else?

Aug 01, 2007 | Quasar VHQ401 VHS VCR

Not finding what you are looking for?
Sony FD Trinitron WEGA KD-27FS170 TV Logo

Related Topics:

144 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75767 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1689 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...