Question about Sony FD Trinitron WEGA KV-32FS120 32" TV

1 Answer

No picture or sound

I have no pic(white snow) or sound. The message no signal is displayed.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 398 Answers
Re: No picture or sound

If you see only snow and the words "NO SIGNAL" are displayed, and you know that you have the set hooked up to a good signal and the TV is set to the right channel, it means that your tuner has stopped working and needs to be replaced. First, though, make sure your signal is good. A good way to test this is to hook the TV to a good VCR, put in a good pre-recorded tape and hit play. Tune the TV to channel 3 (or 4) and if it is still all snow, have the tuner replaced by a qualified tech.

Posted on Sep 04, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

My pictur on my tv looks like it is snowing how can I fix it

try to watch a movie that doesnt contain snowing...
If you mean white pixels for no reason on the screen while whatching the tv it can be caused by unstable power, or tv signal.
try to remove tv cable, then replug it so the picture will clear

Apr 13, 2013 | Standard (CRT) Televisions

1 Answer

I have auto programmed the television, but it only shows white snow no matter what. I have also fine tuned it as well. The model is shownic lc26ce80r. Can you help

My personal guess would be that there is no signal coming through to your tv or the wrong signal coming through. I have the opposite problem...we get picture (snowy) but no sound except that of snow and the Audio/Sound options are NOT helpful. Wish I could be of better help.

Jan 28, 2011 | JVC AV-20220 TV

1 Answer

27" Zenith Television

Assuming the picture tube lights up and you have snow when selecting the tuner function, I would first hook up a working VCR with a good tape and play it while the set is on channel 3 (if that is what your VCR is set to). If no sound or picture is displayed while the tape is playing,it could indicate a defective tuner. If you don't even get snow with no antenna connected (unless your set is designed to go to a blue screen with no signal present) then you could have a problem in the video processing circuits which would explain no picture with the RCA connections as well. This would probably make the set beyone economical repair.

Sep 15, 2008 | Zenith C27A24T 27" TV

1 Answer

Trouble regaining tv picture

It sounds as though the TV [video monitor {Hitachi}] is not set to an input that is sending a signal. Snow is the result.

Cycle through the inputs on the set with ALL devices ready to send signal.

If you have good access to the input area you should see all of the names and what is plugged into each.

Jul 27, 2008 | Standard (CRT) Televisions

1 Answer

No receipt of signal or antenae

Since it has voice or sound then I don't suspect the tuner but probably the tuner does not have the 33 volts that goes through r106 location number on the board. It is a 27K resistor and can be bought for about a dollar at Radio Shack. (pack of 2or3) A repairman or someone experienced in electronic soldering and desoldering can change it easily. Could cost around $50 to repair depending on the serviceman. If it has rca jacks (red, white and yellow) The tuner can be bypassed if you have a cable box that passed these signals: audio left and right and video. Hope this helps

Dec 30, 2007 | Sanyo AVM-3258S 32" TV

1 Answer

No more picture and sound

Tv was showing perfect picture now it's snow solution 1 please check antena wire & its socket. 2 check for dust where wire is connected. 3 loose contact or print break near tuner. 4 tuner defective.

Sep 15, 2007 | Sanyo DS27930 27" TV

2 Answers

Pic n pic

can get my pc n pic to work. it says can not view same channel please clarify problem in more detail thanks

Sep 09, 2007 | Mitsubishi WS-65615 65" TV

1 Answer

Have sound and OSD but no picture

You may have a problem with the video switching IC. Stargazer

Aug 18, 2007 | RCA F27665 27" TV

2 Answers

No Picture, sound is all static

Make sure the ant. input switch didnt change and check the ant. connections If that dosent work sounds like a defective tuner.

Mar 30, 2006 | Philips Magnavox 27MS343S 27" TV

Not finding what you are looking for?
Sony FD Trinitron WEGA KV-32FS120 32" TV Logo

Related Topics:

100 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

66623 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1187 Answers

Are you a Sony Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides