BDEATH HERE. I KNOW THE SOLUTION TO YOUR PROBLEM.. TAKE OFF THE BATTERY AND PUT IT BACK AGAIN. THEN <<<>>> AND THE TURN ON BUTTON >>>> EXPERT FINGERS TO DO THAT :) KEEP HOLDING THESE THREE BUTTONS AND THE TURN ON BUTTON AND THE DEVICE WILL DISPLAY ''FORMATING'' THEN LEAVE THE BUTTONS AND LET IT FINISH.. TATTAA FINISH AND IS GOOD AS NEW!! THATS ALL!!
AND SOMETHING else
if you have some seconds before gets crazy try dial *#7370#. it might reset your phone to the factory form which is good!!!!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
there is a saftey overload switch on the compressor when the compressor is over heating it cuts out. when the fridge is turned off it resets the switch. So now the compressor has burned out totally. you more and likely need a new compressor
Try One of your working TVS and connect it to your cable outlet of the TV that is having problems. If that TV Does not work then there may be a degraded fitting or the Leg coming of the splitter to that outlet could have a Low Signal Problem
Next Take the First TV that was not working properly and put it on the cable outlet of one of the TVs that is working properly and if the TV set works on that Channel then you know it is not your TV that it must be the cable
First be patient with the phone. you have to hold down that power on button (button on the right) for some time before it does its thing!
Second try removing the battery and replacing it, usually works when you get a touch of screen freeze
If neither of these work, post the phone to me -I'll have it!
Regarding the problem of the unit turning on for a second, then turning off after you plug it in....
Plug it in and hold the power button down for 5 seconds. This resets the unit. The unit will still turn off after this however. After that, push the power button on again for one second and it should remain on. Good Luck!