It depends on your version of the WRT54G on the bottom of the router it will say WRT54G V x.xthe x's being your version number. Which version do you have?
Hi there If u have a linksys wrt54g router. the omni antena will not give u the maximum wireless signal if u are going to set it on a motel, u need to setup a wireless access point in order to broadcast the signal or to repeat the signal u need a wireless access point and the model # is WAP54G.. here is the link just incase u want to know more about on how to set up a wireless access point 1. How do I configure an access point as a wireless bridge? http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=4194 2. How do I configure an access point as a wireless repeater? http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=4200 3. How do I configure an access point as an access point client? http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=4202 4.
How will I know if an Access Point is configured as an Access Point? http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=4165..
check this out and i hope this will solve ur concern..
i have a wrt54gs v7.2 that i was told had been smashed. i opened it up and found 1 of the capacitors...
(More)
i have a wrt54gs v7.2 that i was told had been smashed. i opened it up and found 1 of the capacitors had been crushed so i replaced it with 1 of the same value. i plugged it in and got nothing so i looked the board over real hard to find that "u6" had a chunk blown out of it. i would like to replace this and get this router in working order once again