Question about Sanyo DS19330 19" TV

2 Answers

Is my tv remote control capable?

I recently acquired an older Zenith tv. I would like to use it with my satelite cable, but I will have to be able to use the Dishnetwork's romote with it. Is this possible? Serial # 722-15170744 Model # D0920A [Manufactured in April,1987]

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.


    An expert that got 5 achievements.


    An expert who has written 20 answers of more than 400 characters.


    An expert who has answered 20 questions.

  • Contributor
  • 65 Answers
Re: Is my tv remote control capable?

I would suggest calling Dish Network they should know whether the remote will support the TV. But in actually, None of the so called universal remotes I have seen, even the remote for the Satellite receiver, support all of the features on a device other than volume and power on and off, so you have to have the remotes for each of the devices you have in relation to your entertainment center handy, such as DVD Player, a sound system, the television itself. Hope this helps.

Posted on Jan 06, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: Is my tv remote control capable?

May be purchase an appropriate remote from one of those online stores?

Posted on Sep 03, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Goodmorning, bought a zenith tv didn't get the remote. Wonndering how i can programme it using just the buttons on the tv. How do i get the menus up. it only catches threes channels as of now.

There are two types Zenith TVs. One type will have "Menu" button on its front panel and other will not. If your Zenith is the first type, you can programme it without a remote control. If it is the second type, you must have a remote control hanset to programme it.
Programming method
First connect the TVs antenna socket at its back with external antenna or cable.

* With the remote control in hand, press the POWER key to
turn on the Presentation TV.
** Press MENU repeatedly until the Setup menu appears.

*** Using the Up/Down arrow on the remote control, highlight
Auto Program on the screen

**** Press the Right or Left arrow to go to the Auto Program

***** Using the Up/Down arrow, choose either Cable TV or Off-
Air Antenna on the screen.
****** Press the Right or Left arrow to begin the Channel Search.
******* Press ENTER when the channel search is done.

Note: Auto Program finds channels being received by the TV
Cable will not work unless you subscribe to a cable service

Jun 17, 2011 | Zenith H27E35DT 27" TV

1 Answer

Recently acquired a Fisher PC203 television. Connected to cable and chose CATV. Great picture but cannot get tv past channel 40. Do not see a menu button to add or delete channels. Did not come with...

If I remember correctly, this is an older model set (late 1980, early 1990 I think). Many cable systems of that era didn't offer the large number of channels they do now, and the cable tuning of many sets was very limited. Most cable companies required you to use a converter box to get all the channels. So you probably aren't missing anything, the set just can't do more.

Apr 05, 2011 | Fisher Standard (CRT) Televisions

1 Answer

I have an old Zenith A25A12D4 TV made in 1998. I have recently purchased a Sony universal remote control and have tried to program it with the relevant Zenith codes, to no effect. How can I quickly...

There is a 99% chance that your TV does have remote control capability but it could be broken. You might try using the codes from another brand of TV such as RCA, Magnavox, Funai to see if those codes work, otherwise it might be time for a new TV.

Aug 09, 2010 | Standard (CRT) Televisions

1 Answer

I lost the remote and I am trying to set the Wii up and not loose the cable capability

Try website 1-800-Rmotes Factory original.To buy an exact remote replacement.

Mar 27, 2010 | Zenith D32D51 32" TV

1 Answer

27 inch Zenith TV Vertical too big

If you are using a DTV coverter box, you may have changed the aspect ratio with your remote control. look for a button marked "aspect" or "picture size" use that to change size.
If you have a cable box, you may have a similar button.
Or you may find a picture size adjustment on your TV remote.
If you do not have "aspect" button on your remote try going to set up menu and look for picture size.
Older TVs used to have a vertical size adjustment at the back. look in the manual.
If none of the above, you have a biiger problem with the TV internal parts needing attention

Mar 03, 2010 | Zenith C27A24T 27" TV

1 Answer

I just hooked up cable and dont have a remote for my older tv how do I get to ch 3??

Good day,
Look on the back of the tv to see if you have a channel 3 4 selector.
If so, set it to 3.
If your tv has basic controls on the front, such as on/off, volume and channel select, remove your cable hookup to the tv, turn on the set, and using the channel controls set it to channel 3.

Feb 08, 2010 | Zenith Z25A11S 25" TV

1 Answer

No Original Remote , Which substitute

Required remote for your TV is available HERE.

Mar 06, 2009 | Zenith H27F36DT 27" TV

1 Answer

Up and down arrows on channel or menu selections not working.

All the functions of in putting and selections channel are done by one stage of a tv. take your tv to a w/shop, it wll require change of components,
get a diagram from

further help will be provided

Dec 06, 2008 | Zenith B25A02Z TV

1 Answer

Toshiba 36AFX61

Just Connect signal to tv and run autoprogram. Or use video input jacks from converter to tv ( yellow,white and red video in ) and select tv/video on tv pannel front ( don't need remote control) I hope this work for you.

May 11, 2008 | Toshiba 36AFX61 36" TV

2 Answers

Guide Plus Gold service on a 2000 Zenith TV

I have an RCA televison with Guide Plus Gold and it works great. I am not sure about the Zenith and how it works on it. When I turn on the TV with the remote the guide comes up on screen. I just have to press the guide button on the remote to remove that screen and watch the show. If I don't press anything it will go off after 2 minutes. If you have never set up the guide it will probably show up all the time. You will have to go through and program it so it will know if you have cable, over the air or satelite. I don't have satelite service so I don't know if it will reconize it. I know it works with over the air and cable.

Good luck

Nov 03, 2007 | Standard (CRT) Televisions

Not finding what you are looking for?
Sanyo DS19330 19" TV Logo

66 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sanyo Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

66330 Answers

matt martin
matt martin

Level 3 Expert

1187 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Sanyo Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides