Disabled cam my webcam was disabled can you please help me enable it back thANKS

OK, your cam is in use by another program, you need to close that program. Go to Device Manager> Imaging Devices open right click on your webcam and disable, right click on the disabled webcam and enable now try to open the webcam in the sotware you were using.

Welcome to Fixya

The computer has a built in webcam already. You dont need to install another webcam. Try to test the webcam using this site. You can actually enable/disable the webcam by pressing Fn + Esc key.

Thank you for using Fixya!

If you need further help, reach me via phone at https://www.6ya.com/expert/elixirjose_00375ea24bd8141b

Hi,

Welcome to FixYa!

What type of computer do you have? A Desktop or a Laptop?

If you have a Laptop, please make sure that the webcam is enabled. Some Laptop have a feature to enable/disable the webcam (example: Lenovo [Press Fn+Esc to enable/disable the webcam]).

Try to reinstall the webcam driver using the drivers disc. If you don't have the drivers disc, you can download it from the computer / webcam manufacturer's web site (example: support.dell.com).

Try also to reinstall the cyberlink youcam software using the drivers disc or you can download it from the computer or webcam manufaturer 's website.

Hope that helps. Thank you for using FixYa.

Hi
couuld you please tell us which model asus laptop you have
also are you trying to enable or disable the webcam

please post below and someone may be able to help you

many thanks

Welcome to Fixya

Please check if you have the webcam in the device manager. You may try to reinstall the drivers of your webcam. You can also enable/disable the webcam by pressing the Fn + esc key.

Please let me know of any development.

Thank you for using Fixya!

If you need further help, reach me via phone at https://www.6ya.com/expert/elixirjose_00375ea24bd8141b

I want ebuddy old version 1.5.0 plz help

just push the buttons fn + f6 (in my case is f6) check f1 to f12 for the image is a little web cam this is for enable the camera.... or use this way go to start>right click on computer go properties>device manager>now look for imaging devices,usb camera,cam,webcam something like that when you find it enable o disable with the right click good luck......

Try tunring of any system restores, then uninstall all drivers realted to the webcamera, restart pc. let windows itself find the webcam and hopefully this time works. try use software with the pc for its drivers, if it request drivers and you dont have a cd with them tell it to get them from the net. hope this helps.

Its good practice to disconnect and re-connect your webcam before you start - if you have been using it elsewhere the WLM software may have difficulty in locating it. The webcam software can hang on to programs even if you have exited them correctly. Mine, I just unplug it from the USB and plug it back in, to reboot it. If yours is integral with the computer you will have to re-start the computer, use a keyboard shortcut or disable / enable the webcam from the Device Manager.

Some times BIOS disable webcam after updating it.

To enable it do the followings:

1. Restart your Eee PC.
2. Press F2 while booting (to enter BIOS sittings)
3. Go to "advanced" tab (by pressing right arrow)
4. Select "Onboard Device Configuration" (by pressing down arrow)
5. From there you can find if "Onboard Camera" is enabled or not.
6. If not, just press enter to pick "Enabled"

I hope that would help :-)