Dish DVR 625 no drv function code# 05c1, no timer, several other functions not working????

The 625 receiver does not support any internet functionality. You would need to upgrade to a newer receiver box.

Hi my name is Mike Houston a Social Media Representative at DISH. With our Duo SD 625 DVR, it cannot receive HD signal, there will need to be an upgrade to our HD duo DVR systems. If you have any further questions about our DISH equipment please e-mail me at; michael.houston@dish.com

Are you able to access any of your previous recordings?

Try unplugging the receiver for 10-15 seconds and plug back in. The receiver will reboot itself for you and should restore functionality of the DVR. If that doesn't work the hard drive has likely failed and we would need to send a replacement receiver.

Nick Franta
DISH Network Customer Service.

ruukasu2005,

If you are still experiencing problems with your 625 receiver performing live DVR functions, try unplugging the receiver for about 10 seconds and plugging back in. This will cause the receiver to reboot and acquire satellite signal. After the picture returns, then try to pause. If it still doesn't work, then we may need to replace the receiver. I hope this helps.

Ray Calo
DISH Network

britstew2,

It sounds like you have timers setup to record on the 625 receiver. To delete the timers, press the DVR button on your DISH remote 2 times. This brings up the "My Recordings" screen on the TV. On the right side of the screen are several buttons. Move to the "Schedule" button and press select. This takes you to all the timers on the receiver. Go to the first timer you want to delete and then press select on the remote. Now you are on the "Timer Event" screen. Move to the button "Timers" and press select. Now you are at "Timer Schedule". Move to the button "Delete" and press select. This will delete that timer. You need to do these steps for all timers you want to delete. I hope this helps.

Ray Calo
DISH Network

The 024 message means the hard drive itself is having problems functioning correctly. Try a hard reset where you unplug the receiver for 10-15 seconds and plug back in. If the problem persists a replacement may be necessary.

hit master reset .. if that doesn't work rma the dvr needs update


Hunter

delete all recordings from hard drive unplug the receiver from the wall for 5 minutes and plug it back in, if 311 error message appears call dish network

your screwed. jk idk

Turn off your computer off and temporarily remove the DSL filter to see if the Caller ID then works. If that makes no difference you will need to contact the dish company.