Question about Jabra BT250 Consumer Headset

1 Answer

No sound My 250v seems to be linked to my mobile because when someone calls it vibrates. i then press the receive button on my earpiece but I hear nothing. The callers say they hear nothing either although I do speak through the earpiece. It's like the volume has been 'locked' off. Any ideas. . .?

Posted by on

1 Answer

Re: No sound

Had the same problem with the BT250v 'connected' to my Nokia 6021. When connected to my notebook, the 250 did produce sound, so decided the Nokia was the problem. Fixed the problem by doing a full reboot of the phone like this:


Jabra: Turn off the 250

Phone: Delete the BT connection to the Jabra (in BT settings)

Phone: Switch off BT

Phone: Turned off the phone (I've even removed the battery)

Phone: Turned on the phone

Phone: Switch on BT

Jabra: Turn on the 250 for detection

Phone: Look for audio devices

Phone: Connect to Jabra


Problem fixed!

Posted on Oct 23, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Can I pick up an incoming phone call by pressing a

You should be able to take the call by pressing the center button on the earpiece.

Dec 01, 2009 | Motorola Mobility Bluetooth Hands Free...

1 Answer

Microphone does not work

you have to reset the head set by pressing the base button and the earpiece button toghether for about 10 sec and the system will be on factory settings.

Jul 08, 2009 | Plantronics PL-CS55 Wireless Headset

1 Answer


ok here u go first turn on the bluetooth func in ur mobile, now while ur bluetooth haedset is off press the power centre big button for like 10 sec until the blue light stays on continously not blinking position ok then search for bluetooth devices in the phone bluetooth config ur headset will some up like motorola h550 select it then it will ask u for pairing code input 0000 and press ok ur device is now connected u will see the blue light which was continous b4 now blinking it means ur haedset is connected , u have to complete this process in almost 1 min bcoz there is a timeout for this process , now try any call u will hear it in ur headset

pls rate me FIXYA for this

Feb 27, 2009 | Motorola Mobility H350 Wireless Headset

1 Answer

Plantronics Explorer 220 no longer connects to Blackberry Curve

You can have the two devices connected, but still get your sound through the phone. During a call (maybe call your voicemail or an automated number, just to make a call) try holding down the answer/end button on the earpiece until it beeps, and see if the sound switches from the phone to the earpiece. You can also try pressing the speakerphone button on your phone during a call to switch the call to the earpiece.

Did either of those ideas work?

Jan 26, 2009 | Plantronics Explorer 220 Bluetooth Headset...

1 Answer

New Phone Causing Echo

It sounds like your microphone volume is too loud. Get someone on a call with you so they can tell you how it sounds as you adjust it. Turn down the mic volume by pressing the + & - buttons on the earpiece together once which puts the earpiece into mic adjust mode. Then decrease the mic volume by pressing the minus button a few times until it sounds right. The earpiece will automatically revert to normal mode within a few seconds.
If this doesn't work it may be that you need to adjust the compatibility setting for the new phone. This is the small black dial on the base station. The most common setting is 'A' but you may need to experiment with other settings for that phone.

Nov 04, 2008 | GN Netcom GN 9120 Professional Headset

1 Answer

Incoming calls cause earpiece to vibrate

Check the jabra support website and see manual it is a simple hold the volumne button up or down when switching on to disable/enable it

Oct 23, 2008 | Jabra BT250 Consumer Headset

1 Answer

JABRA BT250V Hearing Problem

Cannot get my Jabra BT 250v to work with my Blackberry Curve 8310. Phone indicates I am paired, but there is no audio through earpiece. You can still hear audio through phone. Help.

Jun 18, 2008 | Jabra BT250 Consumer Headset

2 Answers

Jabra Vibrate Feature

from the manual at

Call vibrate*
• Call vibrate is automatically activated when you turn on your headset.
• To disable the call vibrate feature, press the answer/end button and
press the volume down (-) button at the same time.
• To reactivate the call vibrate feature, press the answer/end button and
press the volume up (+) button at the same time.

Dec 19, 2007 | Jabra BT350 Bluetooth Headset Headset

1 Answer

Motorola H350 - Incoming calls

there is nothing you can do about the delay as it's the time it takes for the bluetooth to send the signal to your earpiece to tell it the call is answered, the only way to stop any delay is to set your phone to auto answer in the bluetooth headphone settings or in the call settings.

Aug 07, 2007 | Motorola Mobility H350 Wireless Headset

Not finding what you are looking for?
Jabra BT250 Consumer Headset Logo

Related Topics:

272 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jabra Headsets Experts


Level 3 Expert

328 Answers

Jazz Boyce
Jazz Boyce

Level 1 Expert

728 Answers

Richard Schabler

Level 2 Expert

108 Answers

Are you a Jabra Headset Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides