JP2 settings I'm setting up SY-KT600 Dragon Plus v2.0 MB and was wondering what JP 2 controlled. It is shown in the manual on the layout page but I can find no reference to it anywhere in the book?

you can download or view your manual from this link
http://www.scribd.com/doc/96305727/SY-KT600-Dragon-Plus-Manual
hope that it helped

Hi; here is one manual:

https://docs.google.com/fileview?id=0BzZBKlPMe_SjZjNmNTY5NjctZjgzYi00YWFmLThhNzQtYzkwYmI5NDRjZjAy&hl=en

Can`t find the V2,0

Here is a link for them. just locate what you need on the page, download them, and run them.

dude i think its the prob with the motherboard ram slot try cleaning the slot and reinstalling the ram if then also it does not work i think its the prob with the motherboard slot !! and also make sure that if the ram is working by testing it in some other mobo .

make sure that your bios is up to date by visiting your manufacturer's website and comparing the most recent release to the numbers flashed on your screen on post. If not, flash your bios using the instructions on the manufacturer website. Did this solve the problem?

I have a PDF file for SOYO KT-600 Dragon Plus V2.0. I can email it to you.

Mic & LED connector J30;
Pin1 Line_Out_L
Pin2 GND
Pin3 Lin_Out_R
Pin4 GND
Pin5 MIC IN2
Pin6 GND
Pin7 LAN_Active_LED
Pin8 VCC

try changing the drive configuration in the bios to recognise it as IDE

Had problem like that.Removed board and isolated from touching anything metal.Plugged in memory and video card.Shorted power jumper and booted into bios setup.One of motherboard standoffs was in wrong position and shorting out mb.

is in bios, on advance setings or something the same, or in integrated periperals, after u find him push enter or arrows keys to set on disable, this in most of the case fix the prob, and is a via cipset then i tink is a ac'97 integrated audio in moust of the case (sorry for my english)