Where can i get the driver or the connect it thingy

Beth it's probably the door spike.
You can find additional info at tthese sites.
You'll need the Model #.
They all have helpful 800#s to talk with a tech and make sure you are getting the right part if there's a doubt or want to talk about your issue.

https://www.appliancepartspros.com/

https://www.repairclinic.com/

https://www.partselect.com/Appliance-Parts.htm?msclkid=a7b3213444cd1e09294a4576b9211200

Best to you!

It's the little cone shaped white plastic thingy and the O rings in the pressure reservoir. When you take it apart, it's the valve thingy connected to the end of the trigger thingy that;s inside the large threaded plug thingy. It's held in by a tiny C ring. Daisy USED to sell a specific repair kit that included those specific parts for that specific problem, but don't ask me if I know if they still do. Yeah, I have a 922 sitting behind the door in my den. It's the original metal receiver white diamond gun. I loved that thing growing up and I still shoulder it now and then and remember the good times we had back in the late 70's-early 80's. I've had to rebuild that exact same thing twice before when Daisy sold the repair kit for $4. Hector, good luck on your rifle, sir! I hope you can locate those parts you need!

On a second thought, if you can't locate the kit, try replacing the O rings by themselves. That might work. Those rot with age. Take the valve off, the large threaded plug with the valve thingy on the trigger thingy, and see what size it looks like and just give those a try.

You sound like my EX wife... This thing, that thingy.. LOL.

i didn't know mac needed drivers for projectors.... windows just connects right away

I thought mac did the same thing



I didn't find drivers for any Hitachi projectors


you might wanna get the conversion thingy for the mac input tho, if you don't already have it


and if you do you might wanna get another one, cuz some don't work correctly which might be the case

It's a $200.00 part that houses 5 relays and located up under the air filter cover thingy on the driver side front fender area. You can take your car to a Bob Sumeral Tire and they'll give you a free quote and assessment on what's wrong, just in case I'm not right. I just had the same problem with my temperature gauge.

if this vehicle is a 2005 then your fancy snap on machine is a complete and utter waste of time ,The software is encrypted so your snap on thingy could show anything ------ Your snap on reader is about as obsolete as me an old dinasaur or as obsolete as 5inch floopy disk.Dealer only via encrypted internet connection to authorised dealer IP and fingerprint recognition of the operator

yes the red thing is posative connect the negative (black) to any solid metal or the alt mounts work best then you got power

Check device manager to make sure your not having any driver issues. I would start by just updating the sound drivers to the latest version from Dell's support site. Also some laptops sound is controlled from that little wheel thingy. You know what I'm talking about. That's usually it.

Son's was doing the same thing. Read on another site that this means the USB is making a connection somehow, usually from getting a little moisture in there where the USB (or battery charger) plugs in. Wrapped a tissue around a toothpick and wiped it out good. Phone is now ok.

Try reading THIS, it should help.

Hope that fixed ya...

Geno