(877) 477-7278
Washer and Dryer parts delivered overnight...
Answer
What is the best portable washer to buy?
The Haier model seems cheap, and the kenmore which I was...
(More)
Problem for Frigidaire Washing Machines
Generic problem for all Frigidaire Washing Machines
I have Frigidaire front loading. During the...
By nasisargipan on Apr 03, 2009
I have Frigidaire front load washer. During the spin cycle it leaks from the bottom.
Please help me fixing that.
Please help me fixing that.
Solution #1
posted on Apr 03, 2009
Your washer can develop several types of leaks. You can track down a leak based on when it occurs:
During fill only
During drain and spin only
All the time
During fill only If the washer leaks only during the fill cycle, check these:
All the time If the washer leaks all the time, check these:
During fill only
During drain and spin only
All the time
During fill only If the washer leaks only during the fill cycle, check these:
- Air-gap device -The air gap is a small device found on most washers that prevents the wash water from being siphoned into the household water supply. It's located either mid-way along or at the end of the black rubber hose that comes from the water-inlet valve. Often it's made of translucent plastic. If one of the air-gap components deforms or cracks, you may need to replace it.
- The tube -There's a rubber tube that runs between the water-inlet valve and either the air-gap or the inlet spout. If it cracks or breaks, it can cause a leak.
- Inlet spout -Most washers have a plastic spout near the top of the main clothes tub that directs the water into the tub. If the spout cracks or breaks free of its mounting, it can cause a leak.
All the time If the washer leaks all the time, check these:
- Hot and cold water fill hoses - Check the hot and cold water hoses from the household plumbing. If either hose is leaking, tighten it or replace it, as appropriate.
- Main tub seal - The main tub seal is located between the transmission and the outer tub. It's the primary water seal in the outer tub for the transmission-shaft entry point. If this seal leaks, you can see the leak by opening up the machine's main access panel while the machine is full of water with a small amount of detergent in it. The leak appears at the underside of the outer tub, at or near the center. This seal is difficult to replace. You probably should call a qualified appliance repair technician.
- Pump - If the pump leaks, you can probably spot the leak when the tub is full of water. The pump has two or more black rubber or plastic hoses attached to it and usually has a drive belt that spins the pump. If the pump is leaking, you need to replace it.
- Outer tub - Over time, the steel or plastic outer tubs can rust, split, or be punctured. If this happens, you may have to replace the entire outer tub--but that may not be an economical repair to make. Consult a qualified appliance repair technician for further details.
Yes
No
This Problem Also Relates To:
Frigidaire Affinity ATF7000E Front Load Washer
Frigidaire GLTR1670A Front Load Washer
Frigidaire GLTF1240A Front Load Washer
Frigidaire GLTF530DS Front Load Washer
Frigidaire Tumble Action Washer w/ 14 Cycles, 4 Temps, 5 Spin Speeds - Black
Frigidaire 3.0 Cu. Ft. Top Loading Washer, GLWS1339C
Frigidaire Affinity ATF8000FS
Popular Solutions for Washing Machines
Questions and Unsolved Problems for Washing Machines
Answer
My A7300 Washer will fill but when it is full the cycle stops, the timer does not turn, nothing...
(More)
Answer
When washing on the woolens cycle I get the error code 248 about 5 mins in. My machine is an...
(More)
Answer
How to dismantle a W640? Is there a service manual we can buy?
Sponsored Links
Ask our Experts
Browse popular Problems
More Common Problems
Most Common Problems for:
For Frigidaire Washing Machines:
Top Washing Machine Experts
Experience:
40 years of automotive repair work, home appliance repair experience and general electrical repair.
Ask Me
Top Washer & Dryer Repair
