Question about Frigidaire 24 in. PLD2850 Built-in Dishwasher

1 Answer

Frigidaire Dishwasher Lights wont come on, hit start button, makes noise, no water then eventually shuts off. Couple weeks ago, had work done to furnace now not much water pressure in house...

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 19 Answers

Find your main stop cock in your household for cold water supply and make sure it is fully open(anti clockwise).If this makes a difference to rest of house, then your washers pressure should be fine too.If still same problem, check your washers fill hoses have not been shut off.Try this when you set the machine to wash, you should here water pressure when filling.Hope this is helpful to you.

Posted on Sep 02, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2004 Acura TSX that I just had maintenance work done on two weeks ago, and I was driving it yesterday and it made a irregular "clicking" noise, and then stopped after about 10 sec. and starte


only clickin i can think of that would make idling erratic is the timing has become out. and the pistons are hitting the valves. this would click or tap and eventually go bang. would not recommend reving or driving it till the timing has been checked.

Mar 04, 2018 | 2004 Acura TSX

1 Answer

My frigidaire dishwasher works intermittently. It'll completely stop mid -cycle, as if the power was shut off - then eventually indicate a power failure on the display. Then it wil work fine for a c


Hello Tom Weiss, There are a couple of things to check.
1. Check connection at the dishwasher. It is possible that the wire nuts came lose. Re-tighten and wrap with electrical tape to secure.
2. Check for a small leak from sink or faucet this has also been the culpret before.

Dec 05, 2011 | Frigidaire Dishwashers

1 Answer

My Frigidaire dishwasher will not start. It was working fine about a month ago. The lights on the panel are working and I had the water line checked and it is o.k. I cannot find a serial number but the...


My Frigidaire 500, 1100, 1400, 1500 & 2400 Series Dishwasher was purchased a month ago and it will not start either. The 8 second lock under "Heat Dry" is lit, but nothing happens when you press any of the other buttons. Any ideas?

Mar 27, 2011 | Frigidaire 24 in. FDB510LC Free-standing...

1 Answer

I have a Frigidaire built in dishwasher that won't start. There is a light on by the 3 second lock button


Your dishwasher is in the lock mode. If you press the button on the dishwasher that has the lock for maybe 5 seconds , the light will go off. Then put the dishwasher in a wash cycle (normal) and your dishwasher should start up working. Make sure the door is all the way closed. Hear the click of the door when it shuts. After about 90 seconds it should have water in it, press the start/cancel button 2 times and the water drains out.

Jul 30, 2009 | Frigidaire 24 in. FDB1050RE Built-in...

2 Answers

Frigidaire Dishwasher Energy Star blinking lights.


Hmmm...don't know why this worked, but it did. When the lights were flashing when I tried to start my Frigidaire dishwasher model#FDB1500LF, nothing would happen...just blinking lights, so I went to the house electrical panel, found the switch for the dishwasher, turned off & on again, and now the dishwasher works.
Go figure.

Feb 16, 2009 | Frigidaire 24 in. PLD2560LCC Energy...

1 Answer

Frigidaire Quietclean I "Not filling with water"


Sounds like you might have forgotten to turn the water on to the dish washer... it happens all the time

Oct 19, 2008 | Frigidaire 24 in. FDB510LC Free-standing...

4 Answers

Cda dishwasher


green light on right flashing and beeping noise..Problem solved by thowing a few pints of water in the bottom of the dishwasher...must have 'primed' the pump..which must have been the problem; working fine now. David- Crosby

Apr 19, 2008 | Whirlpool 24 in. ADP5966 Free-standing...

1 Answer

Wont start


The lights flash when the door is not shut all the way, or the sensor that detects that the door is shut is not sensing the door is shut. Try pushing in on the door while hitting the start button.

Feb 13, 2007 | Frigidaire 24 in. FDB1051RE Built-in...

Not finding what you are looking for?
Frigidaire 24 in. PLD2850 Built-in Dishwasher Logo

145 people viewed this question

Ask a Question

Usually answered in minutes!

Top Frigidaire Dishwashers Experts

Carmen Mikulic

Level 2 Expert

415 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Mike

Level 3 Expert

4354 Answers

Are you a Frigidaire Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...