Question about Jensen TS2050J 20" TV

3 Answers

Dish Network Remote Code?

I recently switched from Time Warner (now Comcast) to Dish Network and I cannot program the remote control to my television. The technician stayed for an extra 25 minutes trying to get the remote control programmed to my Jensen TS2050J television. I don't understand it because my old Time Warner remote worked with the television. Are there any codes that are not listed in the instructions that I can use?

Posted by on

3 Answers

Re: Dish Network Remote Code?

My remote dosen't want to listen to me. The light dose show but it's not doing what i say. Whats the matter with my remote?

Posted on Mar 02, 2008

Re: Dish Network Remote Code?

My remote dosen't want to listen to me. The light dose show but it's not doing what i say. Whats the matter with my remote?

Posted on Mar 02, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: Dish Network Remote Code?

Could you tell me what the code was for comcast?

Posted on Mar 24, 2010

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Code number for dish network remote control

028,025,022,020, Try these codes.For more information procedure, and setup code list to many popular remote controls are given.Pull up older posts.

Dec 11, 2013 | Hannspree Standard (CRT) Televisions

2 Answers

What is my tv code for programming my dish network remote.


Welcome to FixYa!

You can use these codes to program the Dish remote control to your Sanyo DS32920:
542, 589, 590, 591, 592,609

You may also try Power Scan Instructions. Please follow the steps bellow.

1. While at the TV locations (TV1 or TV2 depending on which key is installed), point the remote at the TV. Press and hold the TV MODE button on the remote until all four MODE buttons at the top of the remote light up.

2. Press the RECEIVER POWER button on the remote.

3. Press the UP ARROW on the remote, about one press every two seconds. Stop as soon as the TV turns off. This process may take several minutes.
4. Press POUND (#) on the remote. The TV MODE button will flash three times.

5. Press TV POWER on the remote to turn on the TV. Press VOLUME on the remote to confirm the remote controls the TV. If this does not work, return to Step 1.

Keep me posted.


Apr 07, 2011 | Sanyo DS32920 32" TV

1 Answer

Dish Network Remote Coltrol and durabrand model 1304D tv 13" need to program the remote please help


Three digit remote codes for Duraband are:-
042/ 053/ 046/ 206/ 805/ 906

Four digit remote codes for Duraband are:_
0189 0135 0157 0051 0189 0053 0227 0456 0042

NB: Switch OFF and switch ON your tv, with its front panel power switch, [NOT BY REMOTE CONTROL HANDSET]; each time before trying an other code.

Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand

Dec 25, 2010 | Durabrand DWT1304 13" TV

1 Answer

I bought a small sansui tv from walmart, but cannot find out the code to program my Dish network remote to work with it. My Dish book is older and only lists one code (which doesn't work)

I most certainly hope that after all this time, you were able to program your remote! But if you have any questions, haven't gotten it working, or have another tv and remote that you would like to program, I am here to help! The link below is a link to instructions for a power scan. The scan scans all of the codes on the tv until it finds the right one for the remote. It sounds tedious, but it is a quick and simple way to get that remote programmed to the tv. This scan works for every DISH remote, and you can use it on any tv, so if you have a tv in the future that you want to program with the DISH, this will help! It's a very handy thing to know!!!!

Becki Barned
DISH Network Customer Service

Apr 05, 2010 | Sansui TVM1916 19" TV

1 Answer

I want to program my dish network remote to my prima tv

Hi my nameis Mike Houston of DISH Network. I see you are looking for the remote code toyour Prima TV, we do not have the three digit code at this time but we have away to program the remote to the TV through a Power Scan. I will send you thelink that will help with these steps,

Jan 03, 2010 | Prima C2012 TV

1 Answer

Remote Code for Orion to Time Warner Remote

I've got 3 codes actually...
Try them won't you 0179, 0236, 0463
Hope this helps.

Apr 15, 2009 | Orion1934 19" TV

4 Answers

Dish network remote code for Disney 13" TV

On your dish remote, press and hold the tv button until all 4 buttons light up, then release. push either of the power buttons once. Now start pushing the down channel button, It's the one right below select, continue pushing it until tv turns off. When tv goes off push down button one more time then push up button, when tv turns back on stop and press # key, tv light will flash 3 times and should be set. Note....if u press down button and tv does not turn off after going through all codes( tv light will start flashing) press cancel and try again only channel up this time. hope this helps.

Dec 31, 2008 | Disney 13" TV

1 Answer

Remote control code needed for comcast remote

Seems like you have to put a "1" in front of the code....

Dec 21, 2008 | Toshiba 36A50 36" TV

1 Answer

Code for PROVIEW Television

There should be a list on the DISH network website.

Try this:


(this last one has links to remote control lists depending on the color of the buttons; around middle of page)

Jul 04, 2008 | Zenith B27A11Z 27" TV

1 Answer

Can't program the DVR remote to cut my broksonic tv on or off.

what is the code for broksonic universal remote code

Jun 20, 2008 | Broksonic CTGV-5463TCT TV

Not finding what you are looking for?
Jensen TS2050J 20" TV Logo

881 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jensen Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

66499 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Cindy Wells

Level 3 Expert

4721 Answers

Are you a Jensen Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides