Question about Whirlpool Duet GHW9150P Front Load Washer

3 Answers

WHIRLPOOL DUET GHW9400PL0 FRONT LOAD PROBLEM

MY WASHING MACHINE HAS THE CONTROL LOCKED SIGNAL ON AND WILL NOT GO AWAY! i HAVE TRIED THE OPTIONS LISTED FOR THE OTHER WHIRLPOOL MODELS, HOWEVER, THEY DON'T APPLY TO THIS ONE! IF ANY ONE COULD HELP I SURE WOULD BE RELIEVED!!!!!! THANKS

Posted by on

  • Anonymous May 03, 2009

    I have the same problem I've followed the suggested steps to no avail. All controls are locked and can't do anything about it.

×

Ad

3 Answers

Push and hold
END OF CYCLE BUTTON
it will clear up the problem....
Just a dad at home   www.bluefiremedia.biz

Posted on Oct 15, 2007

Ad

Push end of cycle, bottom far rightbutton, then select cycle ,wait 2seconds, and hit pause cancel button, that should work

Posted on Oct 18, 2007

Ad

If you still have this problem try pressing the "end of cycle" button for three seconds.

Posted on Sep 08, 2007

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Washer Duet Control Locked, cannot do anythink, tried the advice but nothing when I push on ON & Cancell I see three bars --- in red, thats all,


Various control lock features on differing models:

Press the end of cycle signal button for 3 seconds

OR

To reset press the DRAIN/SPIN button and hold it for 15 seconds.

OR

Press and hold the END OF CYCLE button for 15 seconds to reset the control.

OR

Press options and select for 10 secs till LOC is no longer displayed

OR

Unplug washer
Remove lower kick panel
Reach up and locate bottom of door lock switch
Grab the teardrop shaped tab
Pull gently till yall hear a click
The door will be opened

themobilian_2964.jpg

If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

Sep 05, 2011 | Whirlpool Duet GHW9150P Front Load Washer

2 Answers

Duet ht washer control locked. How do I unlock it? Really need your help


Hello & Welcome to FixYa


This is a common issue with Whirlpool Duet washers however, your whirlpool duet washer can be reset to resolve the control lock problem. Press and hold the END OF CYCLE/CYCLE SIGNAL button for 15 seconds to reset the control. Please get back to me if you have any other questions.


Kevin

Apr 25, 2011 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Control locked, how do I unlock it. I can't start the washing cycle.


Various control lock features on differing models:

Press the end of cycle signal button for 3 seconds

OR

To reset press the DRAIN/SPIN button and hold it for 15 seconds.

OR

Press and hold the END OF CYCLE button for 15 seconds to reset the control.

OR

Unplug washer
Remove lower kick panel
Reach up and locate bottom of door lock switch
Grab the teardrop shaped tab
Pull gently till yall hear a click
The door will be opened

OR press options and select for 10 secs till LOC is no longer displayed

If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

Apr 03, 2011 | Whirlpool Duet 3.8 cu. ft. Front Load...

1 Answer

My washing machine machine is saying control locked


To unlock the controls press and hold the "END OF CYCLE SIGNAL" for 3 seconds until the Control Locked status light turns off then release the button.
richroth_39.jpg

Jan 10, 2011 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

On the washing machine, on the control panel, a light is lit and states:controls locked


Try this:

Select and hold end of cycle signal for 3 seconds until the control locked status light turns off.

If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

Sep 27, 2010 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

How do you get control lock off whirlpool duet washing machine


To unlock the Control Locked feature:

Press and hold the End Of Cycle Signal button for 3 seconds to turn this feature off.

NOTE: When the machine is running and Control Locked light is on, the machine can be stopped by pressing the Pause/Cancel button, but cannot be restarted until the control is unlocked.

Oct 02, 2009 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

"Control Locked" light is on - how do I turn it off?


Hold down 'end of cycle' button at right side of panel, for 3 seconds.

Mar 22, 2009 | Whirlpool Duet GHW9150P Front Load Washer

10 Answers

Whirlpool duet dryer control locked


Hi ... You press the end of cycle signal button for 4 seconds ... This button is on the far right side & it does work!

Jun 10, 2008 | Whirlpool Duet GHW9150P Front Load Washer

2 Answers

Whirlpool duet washing machine ghw9100lw1


To turn off "Control lock" : press and hold the "End of cycle signal" button for three seconds.

Nov 17, 2007 | Washing Machines

Not finding what you are looking for?
Whirlpool Duet GHW9150P Front Load Washer Logo

Related Topics:

1,040 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Sal De

Level 3 Expert

2699 Answers

Marvin
Marvin

Level 3 Expert

81294 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1474 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...