Model ADP 9410. Dishwasher stopped with a block drain. This was cleaned and restarted. The dishwasher again stopped, checked drain (most common failure in my experience), this was OK, reset machine and water drained. When I try to restart the program can be selected and the indicator light comes on for this, however the start button and indicator light no longer work and the machine consequently won't start. I have had a suggestion that this could be an error (blown track or similar) on the control panel. There is no evidence on any blown track or blown component.
kenmore dishwasher will drain at the end of a cycle but then starts filling while it is still...
(More)
kenmore dishwasher will drain at the end of a cycle but then starts filling while it is still draining. if i turn it off for a moment and then back on, the draining stops and it will fill and run until the next cycle. does a bad solenoid cause it to drain and fill at the same time?
adp242 do not wash everything remain stain on all the items inside.The tablet doesn't dissolve and...
(More)
adp242 do not wash everything remain stain on all the items inside.The tablet doesn't dissolve and all the residue remain on the bottom.