I need a manual for the 4424 LD phone system. where can I find one?

https://fccid.io/2ADYHLD-A01/User-Manual/User-Manual-2565096 FULL MANUAL

70122 4424 Zip 5 Plus 4 Louisiana ZIP Code US Zip Codes

If you can provide the manufacture with model name I might be able to find a manual, otherwise If you have any questions regarding your Million Dollar Baby / DaVinci / Babyletto product, please email the manufacturer "[email protected], if those are the manufacture And they can send you a copy

Ld = all water level lisghts flashing slowly accompanied by 5 fast beeps every 4 minutes - LID is open position

got this out of machine manual hope it helps

Which Lucent Phone system?
Legend/Magix or IP Office?

What ind of line? POTS or a DID off of the PRI?

If it is on a Legend/Magix, you can press:
SPeaker
#
0
0

If IP Office, just call another extension.

There is nothing wrong with your phone. The person or persons calling you are doing a voice call.

Voice call basically pages the phone, to talk to you.

If you want to diasble this, you would need to take that button off the phones. There are other ways, but they involve more programming.

Be sure the headset you have is compatible with the Merlin Magix and a 4424 L4D+ phone. You will need to program both the headset status and headset hangup buttons. Headset status will negate the need for lifting the handset. and the hangup button is used to disconnect the call.

there is no four that means your code is 0020

Sorry, the tester012 was an accident, so I wanted to repost in case there were more questions on this.

The answer still stands for most Nortel PBXs:
To set the time and date of your system you program in load 2:
Step 1) LD 02
Step 2) STAD "Day Month Year Hour Minute Second"
i.e. STAD "24 11 1976 15 41 49" =
November 24th 1976 3:41pm 49 seconds"
To test it...
Type: "TTAD" - (this tests time and date)

But I also wanted to clarify that it is in the manual, but since there are multiple manuals with a Nortel PBX, that you need to look in the LD (or Loads) in them. This particular one is found in LD 02.

Another site to check out for a crash course in LD for Nortel (in case you have similar issues that you need assistance on) is this one here:
http://www.pbxinfo.com/meridian-systems/16288-meridian-crash-course-programming-guide.html

I hope this has been helpful, again I am sorry for not having logged in properly to be notified on more explanation when I posted Solution #1.