Question about SMC WSKP100 IP Wireless Phone

1 Answer

Volume too low

The volume is too low, even at its highest setting. Using an ear bud solves the problem, but is there anyway to increase the volume on the phone's speaker, aside from adjusting the + and - button on the upper left side?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: volume too low

Download the latest driver from SMC corporation and update the phone as instructed.

Before, I couln't hear it ring from 5 feet away. Now I can hear it ring from the next room.

Posted on Mar 14, 2009

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Jabra headset phone

either the switch is partially shorted or the pin on your headet has a shorted wire in it somewhere..try a new headset first..

Jan 08, 2014 | Cisco IP Phones

2 Answers

Volume setting on the 3088

You have to do it during a call.
Press the top navigation button (blue ring) to increase volume, press the bottom section to decrease. The setting is retained when you end the call.
The left button will mute the microphone.

Jul 14, 2013 | RTX DUALphone 3088

1 Answer

Low volume on external forward calls

Are the phone company phone lines analog or POTs (Plain Old Telephone) lines? If yes, it is normal to have low volume when you put two analog trunks together. The fix is to use digital trunks from the telephone company like a PRI or T1 circuit.
You may really have low audio lines. Please see this link Hope this helps.

Apr 06, 2013 | Mitel 5312 IP Phone

1 Answer

Low volume on headset

Press the volume up button.

When the phone is idle, the volume with set teh ringing volume.
When the phone is in speaker phone mode, the volume adjusts the speaker level.
When in headset mode, the volume adjusts the headset volume....

Dec 06, 2012 | Avaya 9608

1 Answer

Volume settings dont save on Mitel 5312 ip phone

You can't save the volume if you put it up to 10. Set it at 7 and see if it saves. If not volume save in the class of service option is not enabled

Jul 18, 2012 | Mitel 5212 IP Phone

1 Answer

Hello, I'm trying to increase the volume on some phones mitel 5220 and 5224, but it only goes to 6. I need the volume level to go to 10. Do you have any ideas? Firmware is Thank you

The ADA compliance requires that the phone when set to the highest volume level will revert back to factory default setting for the next call. This is a safety feature to prevent one's hearing aid from being blown up by a loud caller.
If you turn the volume up to 9, and leave it there, it will stay at 9. If you turn it up to 10, it will always revert back to default.

I hope this helps,

Feb 08, 2011 | Mitel 5220 IP Phone

1 Answer

Hi , I have DORO 615R+1 and i just want to ask


To know about the call waiting and how to increase or decrease the volume please click here to get all the information.

Let me know if it works.

Thanks in advance!

With regards,

Jan 11, 2011 | Doro 635IPW Skype IP Wireless Phone

1 Answer

With the VOIP080 I can ear the people but they can not ear me

Yes, it's compatible !!! you have to set the input device manually in Skype audio settings (set it to Philips Voip080).
when i updated skype in first time i got this problem too

May 09, 2009 | Philips VOIP0801B/79 IP Phone

1 Answer


Adjusting the volume of the caller's voice
You can increase or decrease the volume of a caller's voice during a call. There are 5 volume levels for selection.
To adjust the volume, during a call: While the phone is off hook (i.e. dial tone can be heard), press Up or Down.
The display shows the current volume level. Press Up or Down again to adjust the volume.

Still can't find the most comfortable level?
Besides adjusting the volume on the handset, you might also need to adjust the volume on your PC in order to set the speaker to the most comfortable

To set your handset's ringing melodies and volume:
1. Press MENU.
2. Press Up or Down to select SOUNDS. Press OK.
3. Press Up or Down to select HANDSET. Press OK.
4. Press Left or Right to change the volume level. Press Down.
5. Press Left or Right to select the external melody. Press Down.
6. Press Left or Right to select the internal melody. Press OK to confirm when finished.

Nov 01, 2008 | Linksys CIT200 IP Wireless Phone

Not finding what you are looking for?
SMC WSKP100 IP Wireless Phone Logo

Related Topics:

550 people viewed this question

Ask a Question

Usually answered in minutes!

Top SMC IP Phones Experts


Level 1 Expert

58 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers


Level 3 Expert

18259 Answers

Are you a SMC IP Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides