Question about Car CD Changers
I cannot get the clock display up on my PYLE car audio cd player PLCDCS90M. I cannot get the time to be displayed no matter what I try and the manual is very vague and confusing and of no help to me.
SOURCE: pioneer 45wx4
I had the same problem with the "roay" dude. I did not have an "F" button. Try this...there is an "Audio" button to the top right of my display. Hold this button until the clock numbers blink. Use the up and down buttons till you get the time desired. This button will also allow you to change minutes. Thanks "scottcal" for getting me in the right direction.
Posted on May 24, 2008
Either the code is incorrect or you are using the wrong Code Entry Instructions.
To check your code POST ANOTHER QUESTION quoting the radio`s SERIAL NUMBER ( can be found on the radio casing or by pressing either buttons 1&6 or 2 & 6 )
It normally begins with M + + + + + + (or V or L or C )
Posted on Sep 12, 2009
Easy fix - firstly, you'll need to remove the stereo to get to the serial number.
Have the following tools ready, either:
a) 2 metal rulers
b) 1 metal ruler and 2 kitchen knives you don't mind bending
c) 2 kitchen knives and one fork you don't mind bending
d) possibly 2 forks will also work
Okay, here goes (I used option c):
1) use a kitchen knife to remove the black plastic border around your stereo. 2) on either side you should see the metal bracket and a smaller metal flap - place your fork between the bracket and the flap on the left hand side. jam it in quite far, so it can release the internal clips. 3) place your knives so that the flat (non-cutting) edges are touching and jam it in on the right side (basically so it works like a metal ruler for the clips, which I didn't have on hand) 4) use leverage to prise the whole unit out slightly. You can then remove it by hand. You don't need to remove it fully, you just need to see the serial number, which is on the top in the upper, right corner. 5) take the last 4 numbers of the serial and do some maths! You need to add 1/2/1/2 to the numbers in sequence. For example, if the last 4 numbers are 9462 then your maths should give you 0674 (9 1, 4 2, 6 1, 2 2). Another example is 1234=2446. Remember the number you end up with!! 6) start the electrics of your car (2 key turns). The radio should say ICDE. 7) For this example, pretend the number you ende dup with is 0674. Press the "1" on your stereo until the first number after ICDE says 0. Press "2" until the second number says 6. "3" until the third says 7 and "4" until the fourth says 4. You should end up with the display saying: "ICDE0674". Press the "5" on your stereo and MAGIC, your radio is working again!! 8) push the stereo back in at re-attach the face plate.
p.s. I accept no responsibility if you get zapped or break anything while trying this. I may feel a bit guilty (but not responsible, remember) if I hear on the news that you got zapped though. enjoy your tunes!
Posted on Oct 12, 2010
Tips for a great answer:
Apr 03, 2009 | Pioneer Car CD Changers
Feb 10, 2009 | Pioneer Car CD Changers
Nov 11, 2008 | Pioneer DEH-2000 CD Changer
Oct 20, 2008 | Car CD Changers
Mar 16, 2008 | Pioneer DEH-245 CD Changer
Dec 03, 2007 | Pioneer DEH-225 CD Changer
Nov 04, 2007 | Car CD Changers
Feb 22, 2006 | Pioneer DEH-345 CD Changer
47 people viewed this question
Usually answered in minutes!