Question about JVC XV-N422S DVD Player

2 Answers

JVC DVD player problem

JVC DVD player was working fine while connected to a large screen TV. After purchasing a new DVD recorder/player, this JVC was transferred to a smaller 19" flat screen TV. Immediately upon hooking up all DVDs playing now show dual images on the screen. All technical assistance from JVC company advises this item is malfunctioning and needs to be discarded and replaced. This was a very good product and it seems inconceivable moving from one TV to another would destroy function. Any suggestions would be appreciated. (1st TV was Samsung 2nd was Toshiba - incompatibility?) JVC XV-SA70BK/XVSA756D

Posted by on


2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 80 Answers

Press and hold I\P button from remote control

Posted on May 16, 2008

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 21 Answers

You have set the DVD to progressive output for your big tv. The little one will not accept this. Your manual will tell you how to reset it. The remote may be needed. Reconnect it to the big tv and check the menus.

Posted on Sep 03, 2007


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do i connect my jvc camcorder to my lg recorder

These instructions should be very similar to hooking up to your lg recorder Hope this helps

    • 1 Plug the white and red audio cables into the left and right Audio OUT ports on the back panel of the DVD player. The ports should be color-coded white and red as well, but if not, connecticon1.png the white plug to the left audio and the red to the right.
    • 2 Connect the yellow plug to the Videoicon1.png OUT port on the DVD player.
    • 3
    • Plug the other ends of the three cables into the matching composite AV IN jacks on the back of the JVC LCD TVicon1.png.
    • 4 Turn on the DVD player and the JVC set, then press and release the "Input" button repeatedly on the TV remote control until the DVD screen appears on the LCD panel.

Read more:

Apr 26, 2014 | Computers & Internet

1 Answer

Connect jvc dvd to zenith tv

just hooked up with an rca cable from the output jack ( audio/video ) of your dvd recorder then the other end connect to the input jack of the tv. then set your tv at the same time the dvd player to record.

Aug 11, 2012 | JVC DR-MV150B DVD Recorder/VCR

1 Answer

Hi, I have a Philips DVD recorder which since

My connections were fine, I just hadn't retuned the DVD player into the right extension hence the (no signal) sign.

Nov 03, 2009 | Philips DVDR610 DVD Recorder

1 Answer

When connecting my Blue Ray DVD Player (Panasonic DMP-BD35) to my JVC TV (LT-37DS6BJ) I get large black bars at the top & bottom of the screen despite changing the aspect ratio on the DVD. The TV...

It all depends on the dvd that you are watching you cant change it to anything bigger than what is was recorded.

You will have to just watch it like it is. I have the same thing with my dvd player its really thin picture its annoying

Dec 04, 2008 | JVC Televison & Video

1 Answer


trying to record on it. if your tv had an output video try to connect it there do not connect the cable to the input of the tv.
should be tv output to the dvd recorder input.

Feb 23, 2008 | JVC HR-XVS30 DVD Player/VCR

2 Answers

Dubbing to DVD not working

make sure the DVD is formated.

Feb 01, 2008 | JVC SR-DVM70 DVD Recorder

1 Answer

Programming Code

Barring the right codes to make this thing work, I have resorted to running the numbers (ie 000 thru 999) to "stumble" across the right combination...accordianman

Dec 29, 2007 | TruTech TT320

1 Answer


you have to plug everything to the tv. only thing them are good for is recording to some other unit. like dvd recorders

Mar 05, 2017 | Lasonic DVDP | DVD-7050 5.1CH

Not finding what you are looking for?
JVC XV-N422S DVD Player Logo

233 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75025 Answers

Jaime Hernandez

Level 3 Expert

2326 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a JVC Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides