Question about Hotpoint 24 in. DWF32P Free-standing Dishwasher

Open Question

My kitchen aid dish washer model KUDI01ILWH6 stopped working . the only light that comes on is the light for hi temp dcrub.please advise

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I fix this. Kitchen aid dish washer?


It appears to be the door switch sensor. http://www.searspartsdirect.com/model-part/kudl03fvss0/0593/0130000/w0808049/00002.html
I suggest replacing it.

Mar 20, 2016 | KitchenAid Kitchen Aid - KUDE40FXBT...

1 Answer

Dishes won't come clean


Check your water inlet for the right pressure and then the water float valve for the right amount of water in the tub for washing. The tub has to have the right amount of water in it to pump it up to the top. It is also possible that the pump has debris in it that is restricting the flow. Clean out the screens and check the bottom of the washer tub for debris at the pump inlet. Use white vinegar to clean out your washer. Start your washer - open the door and pour in a lot of vinegar. Let it run for a few seconds and stop it. Let the vinegar work on the scale and debris. Start and stop it several times during the day - not completing the wash cycle until in the morning - after it has sat with the vinegar 10 -12 hours.

Mar 03, 2014 | KitchenAid 24 in. KUDP02CR Built-in...

1 Answer

My Kitchen Aid Dishwasher model # KUDS40FVSS0 has blinking cancel, sani-rinse and normal wash lights. It will not run at all. We replace the control board and still nothing. Please Help!!!


I have had this problem. Mine didn't work for over a week and by the time the repair man came over to 'replace the board' it suddenly worked. The guy told me that if you use ANY type of liquid dishwashing soap (for your sink) and any residue/bubble is on the dishes, it can cause your dishwasher to break. I have no idea why but I've been really careful to make sure I wasn't using dish soap prior to putting them in the washer.

I've had 3 service calls on this dishwasher since I purchased it 3 years ago. I'm having similar service issues with my Kitchen Aid Fridge. And of course no help from Kitchen Aid.

Sep 25, 2013 | KitchenAid Dishwashers

1 Answer

The clean light on my kitchen aid dish washer kept blinking and would not stop. after reseting it by pushing the buttons 2-3 times it cycles though and stops. then nothing works when i push the...


The electronic control looks for a temp. rise of 2-4 degrees. If no temp.rise control assumes a heater fault and blinks clean light 7 times. Bad heater. Water fill when completed can be no less than 1/2 inch below heater. If so, water valve probably. Circulation motor not working properly. Neutral door switch. Tech sheet is behind bottom cover. Check underneath of unit for leaking or white hard water deposits. Common for seals to leak. If unit is unusually noisy, motor problem. Common after 4-5 years. Will check back to see if you other questions. Good luck.

Mar 28, 2011 | Dishwashers

2 Answers

Kitchen Aid Model # KUDP01ILWH2 Dishwasher dishes


Hi.

Using too much rinse aid will not work. Stick to user manual factory prescriptions. If you use correct amount of rinse aid, and the right product for your dishwasher, that is not the cause of the stains.

Ensure that you are using the right detergent along with rinse aid. Check specifications on manual.

Ensure that the drain well is clean.

Ensure that spray arms have enough pressure, check water level and impeller pump.

If you still get stains on dishes, and you are sure that they had been caused by limescale, that means that the water in your house is too hard. This will also damage your appliances in the long term, causing faults due to accumulation of limescale and rust.

The best thing to do is installing a water filtration system on the appliance inlet.Call your local appliance shop or technician to discuss about the problem and purchase a filtration system for your appliance.

Apr 08, 2010 | KitchenAid 24 in. KUDP01IL - Multiple...

1 Answer

Hi! I'm having a problem with my dishwasher its a Kitchen Aid Mod # KUDK03CTSS3 It's is just rinsing the dishes then stops completely and the start/resume button flashes!


have you found a solution? i have the same model and it won't take the detergent and only rinses the dishes. please let me know! thanks.

Sep 26, 2009 | KitchenAid Dishwashers

1 Answer

Kitchen aid dishwasher doesn't clean dishes in the top rack


Sounds like you have 1 of 2 problems. Either your pump is clogged or you need a bigger drain loop.

Nov 25, 2008 | Dishwashers

1 Answer

Dish washer repair


hi there,

you'll have to manually take the water out.

do you have any error messages on the display?

if yes, please advise the exact error message.

if not, please check the drain pump for any thing stuck in it.

Sep 23, 2008 | KitchenAid 24 in. KUDI02IRBS Stainless...

Not finding what you are looking for?
Hotpoint 24 in. DWF32P Free-standing Dishwasher Logo

Related Topics:

64 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hotpoint Dishwashers Experts

AcmeUK

Level 1 Expert

25 Answers

yadayada
yadayada

Level 3 Expert

75807 Answers

Brad Brown

Level 3 Expert

15557 Answers

Are you a Hotpoint Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...