Mecha error 03 in kodak 7000 printer - Office Equipment & Supplies

SOURCE: kodak printer 6800 mecha error 11

this is error created at ur printers cuter unit , so open the frot cover and clean the all 3 sensors

SOURCE: Tenho uma kodak photo printer 68 plus com a

Ola,
Será necessário a troca do motor principal. Qualquer duvida ligar 19 - 9601 5385 Helder.

SOURCE: Mecha Error 12 on Kodak Photo 6800 printer

I had a 6850 with the Mecha error 12. No listing in the service guide for this error. I took the front of the printer off and observed that the cut head was not moving far enough to the left to trigger the sensor. I realized that a screw of unkown origin had fallen down behind the cut head and was preventing it from triggering the left sensor. It took a curved pick tool and a pair of tweezers to get it out. I don't recommend taking the cut assembly apart as the alignment is pretty crucial.

Hope this helps some poor sole from the hours of fustration that it gave me.

Randy

SOURCE: I am getting a mecha

there are problem in main pinch motor replace it