Question about Emerson Black Microwave Oven

Open Question

I have a Durabrand DBM001 microwave. Worked fine until yesterday. Today when turning dials the unit does not power on at all. Have checked the fuse in the plug and that is fine and the plug socket has power. Do not have the user manual, so do not know what to check first and cannot find the manual online.

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
MicrowaveSvc
  • 9085 Answers

SOURCE: No power - Nothing happens

if you have power at the outlet and the internal fuse is okay, I would say you have a problem on the control board. We repair these nationwide for $32.50. Please see my profile for the Web address: http://tinyurl.com/yzjozk

Posted on Jan 21, 2007

Ad
JULIANFIX
  • 975 Answers

SOURCE: Thermal fuse MW8102SS Emerson microwave

normally the THERMAL FUSE is located in series with the 20 AMP power line fuse ,in most cases. hope this helps

Posted on Apr 27, 2008

MicrowaveSvc
  • 9085 Answers

SOURCE: micowave new but not working

This is usually caused by either a bad door switch, a loose door switch mount (which are pretty simple problems to fix) or occasionally a problem on the control panel.

Even though a door switch clicks, it may still be bad inside. Its continuity must be checked.

Door switch or mount trouble can be caused by slamming the door or by opening the door while it's cooking without hitting the Stop pad first.

There are plastic mounts inside the microwave which hold the door switches and onto which the door latches lock when you close the door.

The screws on these mounts may be loose. If they get too loose, the switches will not be activated properly.

Sometimes it's a broken tab on the switch holder, allowing the switch to rotate just out of position. This tab can be hard to see, since it is under the bottom edge of the switch.

One test that sometimes helps is to gently lift up (and/or push down) on the door or handle as you try to start it. If it works or tries to work, then it's a door switch mount or door alignment issue.

If you or someone you know decide to look into it, we have critical information on safety, disassembly and door switches at our site, and our link is at our listing here on FixYa:.

If you only need a switch, you can order one from us for $5 postpaid.

Since it's less than one year old, it should be fully covered under warranty. I'd suggest contacting the manufacturer to get it fixed free.

For more help from Emerson visit here or get help using your appliance at 1-800-898-9020. Get help locating a servicer or parts at 1-800-695-0098.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Posted on Sep 16, 2008

MicrowaveSvc
  • 9085 Answers

SOURCE: My Emerson Microwave Model # MWG9111SL keeps blowing fuses..

You have a shorted high voltage capacitor.

Here is a link you or someone you know can use to test it, but please read the safety info:
http://www.gallawa.com/microtech/cap_test.html

For more help from Emerson visit here or get help using your appliance at 1-800-898-9020. Get help locating a servicer or parts at 1-800-695-0098.

Emerson parts are distributed by Fox International and their number is 800-321-6993. Or you might try e-mailing researchdept@fox-international.com

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Posted on Nov 24, 2008

joeguest2
  • 2080 Answers

SOURCE: Our microwave oven Emerson 8992SB

Here is a link to your microwave's Online User Manual in case you don't have it already:

http://www.emersonelectronics.ca/emerson/documents/MW8992RD%20-%2009%20Cubic%20Ft%20900%20Watt%20Microwave%20Ovenmanual.pdf


On page 13 of the above manual you will find instructions on how to deactivate the child lock in case that was the problem.

Basically you just hold down the STOP/CANCEL button for 3 seconds.

If it is not that then you might be looking at some kind of power supply circuit board or control circuit board failure and some significant disassembly since I don't believe there is an easily accessible fuse you can replace in the unit.

Good luck and I hope this was at least a little helpful.
Joe.

Posted on Feb 13, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Intermittent Power Loss


Take the unit apart and carefully inspect the wires under the keypad...short of that..junk it and get a new one. It seems they just don't make things the way tey used to.

Nov 19, 2013 | Samsung SMH9187 Microwave Oven

1 Answer

I have a Durabrand DBM001 microwave which until yesterday was working fine. Have checked plug and socket - they are working fine. As it is only a basic microwave there is only a timer button to turn the...


This could be the upper latch in the door. Mine stopped working just as you describe. After dis-mantling I noticed the mechanical action which should operate 3 micro-switches in the door lock was not working correctly on the upper switch when the door was closed.

This is part of the safety interlock circuit to prevent operation of the magnetron when the door is open.

Closer inspection of the door striker arm revealed a crack which allowed the top part of the arm to spring away from the upper switch which stopped the oven working.

This part is easily removed by prising the door inner trim off gently, starting at the bottom was easiest for me, then sliding the arm up against the spring tension until it slides clear of the guide grooves, finally detach the spring.

I have no idea where to get spare parts for this ASDA only branded product, so I am going to use super strong epoxy resin to repair the striker arm.

Jul 31, 2013 | Microwave Ovens

1 Answer

Durabrand Microwave


Google this and you will find where you can get one

May 25, 2013 | Microwave Ovens

1 Answer

Sharp R-1870F Microwave Won't turn on


Could be just a fuse but probably the diode pack or magnetron.

May 24, 2017 | Sharp R-1870 Convection/Microwave Oven

1 Answer

Microwave will not turn on -- light does not come


Chances are good that you have a bad door switch.

You can find helpful exploded view diagrams and order parts by entering your full model number here.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

May 22, 2010 | Whirlpool RMC275PD Microwave Oven

1 Answer

DBM001 Plate No:U10


I'm about to list a U10 microwave plate on eBay.

Oct 30, 2009 | Microwave Ovens

1 Answer

Where can i purchase the plate for model DBM001


You should contact Durabrand at the number in your owner's manual.

If for some reason you don't have your owner's manual, I would suggest calling the dealer where you bought it to see if they have a number for Durabrand.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Sep 15, 2009 | Microwave Ovens

1 Answer

We have a JVM1870SF02 Microwave Oven. Everything


Is it on a gfci plug? If it is reset that. If not I would recheck the circuit breaker again

Sep 23, 2017 | GE Microwave Ovens

1 Answer

Microwave oven#NNC2003S will not turn on


yep the little blighters like to pull fast ones, remove the casing and find the mains protection fuse and change it( 10amp >).also check the control circuit fuses. fuses get tired and fail, none moreso than in microwave units

Feb 10, 2009 | Frigidaire FMV156DC Microwave Oven

Not finding what you are looking for?
Emerson Black Microwave Oven Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Emerson Microwave Ovens Experts

William Miller
William Miller

Level 3 Expert

9085 Answers

Devabhakthuni...
Devabhakthuni...

Level 2 Expert

225 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Are you an Emerson Microwave Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...