Question about Panasonic NV-GS57 DV Digital Camcorder

1 Answer

How recorded video can be transferred from the video camera Panasonic NV-GS57 (it has a USB 2.0)to a windows 7? It is equipped with usb driver but fits Windows XP, Windows 2000. (one of the files that installed I made it "Run this program in compatibility mode for Windows7" but it doesn't sense the camera connection).

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 269 Answers

USB will only transfer the still picture.
For video you require a firewire cable.
Please note the sockets on the computer as they can be 6 or 9 pin depending on make/model.
The camera will be 4 pin.

Al

Posted on Nov 22, 2013

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
Mellburn
  • 24 Answers

SOURCE: Required USB Driver for mini dv Panasonic NV gs 15

The Panasonic NV gs 15 can only be used as a webcam with the USB cable.
You need a 1394 firewire / DV cable to transfer the video to your pc.

Posted on May 09, 2009

  • 415 Answers

SOURCE: Cannot transfer tape contents to PC

Hi,
To transfer video from your camera you will need a firewire cable and a firewire port on your PC. If you don't have such a port you can buy a PCI firewire port.
After you connected your camera with firewire cable you can then use windows movie maker to transfer your video.
See this for more info and photos

Posted on Feb 28, 2010

etaf
  • 779 Answers

SOURCE: Panasonic Camcorder USB Driver for Windows 7 OS

Support site http://www2.panasonic.com/consumer-electronics/support/Cameras-Camcorders/Camcorders/MiniDV-Camcorders/model.PV-GS500
User manual here http://service.us.panasonic.com/OPERMANPDF/PVGS500-MULTI.PDF
The USB driver gven by the manufacturer is not installing on the Laptop. you should NOT need a USB driver with windows 7 - the USB should automatically detect the camera

Posted on Apr 21, 2010

  • 1 Answer

SOURCE: I want the USB driver

I want the USB driver Problem with the Panasonic NV-DS50EN Mini DV Digital Camcorder I want the USB driver for panasonic nv-ds50 for windows 7.

Posted on Feb 06, 2011

  • 5 Answers

SOURCE: My Panasonic NV-DA1 Mini DV will not conntect to my PC, TV, or DVD recorder

I purchased a pluscom easy cap usb2.0 capture device,it comes with disc.Load onto your Laptop or Computer put in your number from disc cover and it will download a program that says VHS to DVD.Its all you need. connect your camera lead from the av out in side of camera it should have a red,white,and yellow plug on and connect it to your easy cap usb plug in then just push capture and your downloading. you have to have a play to select what files you want to save to but its easy enough. Its only taken me about 2 yrs to solve this download problem but all ok now.Good luck.

Posted on Sep 02, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

NVGS57 shoftware


alot of software are not made to run on windows 8 so you might need to use windows 7 or even XP.

Jan 30, 2014 | Panasonic NV-GS57 DV Digital Camcorder

1 Answer

Need to download videos from nv-gs57 to dvd in laptop


There are number of softwares if you are doing normal editing which is not professional you can use Pinnacle studio 12 or Nero 9 or 10. Where you will be using a firewire cable called also by Sony by the name I-link or 1394 cable. Most camcorders come with thier on software to download the drivers for that camera for a particular operating system. Try this or otherwise tell me the details of what you have and what you are trying to do.

Nov 03, 2011 | Panasonic NV-GS57 DV Digital Camcorder

1 Answer

Need driver for panasonic nv-gs27


You might be connecting the Camcorder using USB interface. The drivers for USB streaming is not available for Vista and Windows 7..
Operating System also matters..
If you're using XP OS, you can install the driver from supplied CD and use Windows Movie Maker to transfer the recordings using USB interface.
Vista, Windows 7 - You need to use i.LINK or A/V interface to transfer the recording. When using i.LINK with Vista, you can use the Picture Motion Browser software.
I think this will definitely help you to connect the Camcorder..

Jan 05, 2011 | Panasonic NV-GS27 Mini DV Digital...

1 Answer

I need the Panasonic NV-GS27 drivers


I don't think you do. According to the Panasonic document "Operating Instructions (PC-Connection)", your camera does not use a USB connection and did not even come with the software CD that was shipped with cameras that have a USB connection.

You need to use the Firewire (DV) interface to transfer videos, and this does not require drivers. It does require Windows XP with service pack 2 (or 3) and DirectX 9.0b/9.0c, and you will probably need to fit a Firewire interface card to the computer's internal PCI bus, as most Windows computers don't come with this connection. Whether this camera will work with Windows 7 is not covered by the document.

You then use various video editing software (commercially available or free downloads from the internet) to download the recordings. The software on the computer controls my Mini-DV camera, including rewinding and play functions to record from the tape in the camera.

You can obtain a copy of the Panasonic document from THIS LINK

Dec 08, 2010 | Panasonic NV-GS27 Mini DV Digital...

1 Answer

Searg driver windows 7 panasonic NV-GS57EE


Maybe, It doesn't work because the driver you installed. It is for other versions of operating system. I am also using windows 7 like you.Dont worry, You can still use your installer/driver from other versions of operating systems. Before you installing any program/driver in a windows 7 Operating System Computer, Use "troubleshoot compatibility". Right Click the Icon of your program installer first, then choose "troubleshoot compatiblity". This will allow you to choose on what type operating system your program will run. Just reply back if it still doesn't work.:Djulyallan01_8.jpg

Nov 07, 2010 | Panasonic NV-GS57 DV Digital Camcorder

1 Answer

I want the USB driver for panasonic nv-ds50 for windows 7.


I want the USB driver Problem with the Panasonic NV-DS50EN Mini DV Digital Camcorder I want the USB driver for panasonic nv-ds50 for windows 7.

Oct 18, 2010 | Panasonic NV-DS50EN Mini DV Digital...

2 Answers

Panasonic Camcorder USB Driver for Windows 7 OS


Support site http://www2.panasonic.com/consumer-electronics/support/Cameras-Camcorders/Camcorders/MiniDV-Camcorders/model.PV-GS500
User manual here http://service.us.panasonic.com/OPERMANPDF/PVGS500-MULTI.PDF
The USB driver gven by the manufacturer is not installing on the Laptop. you should NOT need a USB driver with windows 7 - the USB should automatically detect the camera

Apr 21, 2010 | Panasonic Palmcorder PV-GS50 Mini DV...

1 Answer

How to copy video from a panasonic NV-GS57 to a computer


I am not able to copy video from my panasonic digital NV- GS57GC to my PC.Pls help

Dec 26, 2008 | Panasonic NV-GS57 DV Digital Camcorder

2 Answers

How to download video from panasonic nv-gs15 to Computer


first of all you should have your cd driver came with camcorder and as far as i know your driver isnt compatible with vista so better try to use windows xp. install the driver, plug your camcorder using your usb. upload your videos from your camcorder to your pc using ULEAD MOVIE MAKER. edit it and save it with any various types of videos. finish!

CHARCOIS

Aug 24, 2008 | Panasonic Palmcorder PV-GS14 Mini DV...

Not finding what you are looking for?
Panasonic NV-GS57 DV Digital Camcorder Logo

107 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Video Cameras Experts

Pieter Vleeshouwers
Pieter Vleeshouwers

Level 3 Expert

1806 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

zimcloud

Level 2 Expert

135 Answers

Are you a Panasonic Video Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...