Question about Televison & Video
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Replace its Horizontal output Transistor. If the base-emitter junction has a leak inside it, this type of fault will occur. Before replacing it, check the main DC voltage to LOT [Line Output Transformer]. It should come around 102VDC. If there is not this much voltage, check the electrolytic filter capacitor connected across thie supply line to main negative for open or value developed. Replace the same is good. Till there is low voltage found, check the retifier diode that rectifies this 102 volt DC. If all the above are OK and still you get a stamp like raster, check the heat of the Horizontal Output Transistor described above. if it overheats, LOT is defective and should be replaced with same type and number. OK.
Posted on Jun 12, 2011
Try to read the color code of your resistor, if the resistor was burnt you have to do is send your TV to tech.
Posted on Dec 10, 2012
Tips for a great answer:
Jun 05, 2016 | Televison & Video
Oct 20, 2015 | Televison & Video
Oct 27, 2013 | Televison & Video
Dec 10, 2012 | Televison & Video
Jun 14, 2011 | Televison & Video
Aug 03, 2010 | Televison & Video
Oct 20, 2009 | Televison & Video
Dec 19, 2008 | Televison & Video
35 people viewed this question
Usually answered in minutes!