Question about GPS

Open Question

Harman kardon from saab

The clock will not hold the correct hour. Whenever the car is turned off the clock will reset to 12 or 1 o clock but the minutes will remain on the correct time. The nav system will not retain locations, phone numbers, previous settings. The destination is always set at Washington DC but the navigation system works great. I have had the dealer reload the firmware to the latest updates with no Improvement.

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 504 Answers

SOURCE: GARMIN C330 WILL NOT LOCATE SATTELITE

Have you tried a Master Reset? It may help, but it WILL ERASE ALL OF YOUR FAVORITES. To do a Master Reset, turn the unit off. Press and hold the bottom right of the screen, then press and release the power button. Keep pressing the screen until the unit asks if you are sure you want to reset. Follow the prompts.

Posted on Mar 03, 2008

Ad
  • 1 Answer

SOURCE: map update

where can I get a map update for medion MD95233

Posted on Jul 25, 2008

  • 1 Answer

SOURCE: Nortech Navigator e-gps010 map updates

You can contact Ferro Works and they will send you a new CD with maps on it. They were not very clear on how updated the Version is. I called them and had a commitment of a new CD to be sent to me within fifteen minutes of dialing.
Here is the Info

619 Slack Street
Steubenville, OH 43952 USA
Tel:866-578-0101
E-mail:service@ferro-works.com

Posted on Oct 02, 2008

  • 1 Answer

SOURCE: Garmin Nuvi 360T won't find satellites

I should have posted this sooner.  I got hold of Garmin about my problem with the nuvi 360.  They were very nice about it and had me send the unit to them and they sent me a new one.  It was that simple.  I never found out what the problem was but the explanation from the other guy makes sense...... that the internal battery wore out and had to be replaced.  I am very happy with Garmin products and am glad everything worked out.

Posted on Oct 27, 2008

ThaMp3Doctor
  • 8596 Answers

SOURCE: I have a cuisinart coffee maker. I can set the

Unplug the coffeemaker for 20 minutes or longer - not a second less - in order to fully reset it. Then, when you plug it back in, turn the function dial to Clock again. Press and hold the HR button for a few seconds, and then set the hours. It should work now unless it got zapped, as you said.

Good luck!

-Tha Mp3 Doctor

Posted on Mar 21, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i factory reset my Harman Kardon avr 55 receiver


Troubleshooting Guide

Processor Reset
In the rare case where the unit's operation or
the displays seem abnormal, the cause may
involve the erratic operation of the system's
memory or microprocessor.
To correct this problem, first unplug the unit
from the AC wall outlet and wait at least three
minutes. After the pause, reconnect the AC
power cord and check the unit's operation. If
the system still malfunctions, a system reset
may clear the problem.
To clear the AVR 520's entire system memory
including tuner presets, output level settings delay times and speaker configuration data,
first put the unit in Standby by pressing the
System Power Control button 2. Next,
press and hold the Tone Mode 8 and the
FM Mode Selector ^ buttons for three
seconds.
The unit will turn on automatically and display
the RESET message in the Main
Information Display Y. Note that once you
have cleared the memory in this manner, it is
necessary to reestablish all system configuration
settings and tuner presets.


ELECTREPAIRUSA@ELECTREPAIRUSA.COM

Jan 05, 2017 | Harman Kardon Audio Players & Recorders

2 Answers

HOW TO RESET HARMAN KARDON AVR70


Hi, Try this. Hope this helps and I have the link here to the manual.
Processor Reset
If the AVr behaves erratically after a power surge, first turn off the front-panel
main
power switch and unplug the Ac power cord for at least 3 minutes. plug the cord back
in and turn the AVr on. If this procedure doesn't help, reset the AVr's processor as
described below.
note: resetting the processor will erase all user configurations, including speaker and
level settings, and tuner presets. After a reset, reenter all of these settings from your
notes in the Appendix worksheets.

To reset the AVR's processor:

1. press the front-panel Standby/on switch to place the unit in the Standby mode (the
Standby Indicator led will turn amber).
2. press and hold the front-panel Standby and memory/folder buttons until the reSet
message appears on the front-panel message display.
3. press the memory/folder button again to reset the AVr's processor.
If the AVr does not function correctly after a processor reset, contact an authorized
harman
kardon service center for assistance.
to locate an authorized service center,
visit our web site at www.harmankardon.com.

https://www.harmanaudio.com/on/demandware.static/-/Sites-masterCatalog_Harman/default/dw409ee4c9/pdfs/AVR700NEW_OM_EN.pdf

Jul 28, 2016 | Harmon Kardon Harman / Kardon Avr 70...

1 Answer

How do i reset the hk3770


Place the receiver on Standby mode so that the Power Indicator turns amber. Press and hold the front-panel Tun mode Button for at least 5 seconds until the receiver goes on and a reset message appears in the display.

Mar 01, 2015 | Harman Kardon Harman/Kardon HK 3770 stereo...

1 Answer

Harman kardon avr 151 stuck on tv speaker mode


Hi
Try this.
To reset the AVR's processor:
1. Press the front-panel Standby/On switch for more than three seconds to turn the AVR
off (the Power Indicator will turn amber).
2. Press and hold the front-panel Surround Modes button for at least 5 seconds until the
RESET message appears on the front-panel Message Display.
NOTE: After performing a processor reset, wait at least 1 minute before pressing any
Source Selector buttons.

Good Luck
Happy to help

Jan 04, 2014 | Harman Kardon Audio Players & Recorders

1 Answer

12 24 hour clock


Setting the Time
Press and hold the HR or MN buttons for two seconds.
Then press and hold HR until the correct hour
appears on the display. AM or PM will appear for
morning or evening hours. Press and hold MN until the
correct minute appears on the display. The time
may be set with the ignition on or off. The clock symbol
will appear on the display in time-set mode.

Jun 18, 2013 | Chevrolet Cars & Trucks

1 Answer

How do i reset an harman kardon avr-310


There is no reset for it, If it doesn,t stay on something is wrong with it,End it has to be taken in for repair,

Nov 01, 2012 | Harman Kardon Audio Players & Recorders

1 Answer

Harman kardon go and play don't have video out port


If I understand you correctly the Harman Kardon does not supply the output video and usb ports. Since this is a go and play they pobably felt it was not needed. to impliment these changes would require a complete design change.

Mar 28, 2012 | Harman Kardon Go + Play Portable Speaker...

1 Answer

Harman Kardon AVR7550 turns itself off.


check to see if there is a reset switch inside on transformer bd. could be dirty. clean with contact cleaner.

Nov 26, 2011 | Harman Kardon Audio Players & Recorders

1 Answer

HK 3370 turned into protection mode after pluging in a playing iphone. Happened more than one hour ago but hk3370's power light is still red. How do I get this thing out of the protection mode?


turn unit off using main power button, hold down t-mon and cd buttons at same time as switching main switch on should power up and show reset on the display for a short time then dhould go to standby this has reset unit and should now be ok

Jan 10, 2011 | Harman Kardon HK 3370 Receiver

1 Answer

I have the Harman Kardon HK3370,I have no sound was working fine this morning before I left for My Job.after a 12 hour shift came home turn it on and have no sound check speakers and all are fine.


Make sure speaker switch is turned on, when it is the small box on the side of the display will illuminate. Make sure the tape monitor is off. Check that no one pulled out the pre-out to main-in bridges in the back.

Jun 16, 2009 | Harman Kardon HK 3370 Receiver

Not finding what you are looking for?
GPS Logo

Related Topics:

26 people viewed this question

Ask a Question

Usually answered in minutes!

Top GPS Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

The Knight
The Knight

Level 3 Expert

74496 Answers

kakima

Level 3 Expert

102366 Answers

Are you a GPS Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...