Question about Lexmark C543DN Printer - Color - Laser - 21 PPM - 1200 DPI X 1200 DPI - 250
Posted by Anonymous on
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
How to Change the Display Language on a Lexmark X3450/X3470/X3480
Posted on Mar 08, 2009
Please follow the steps given below:
1. On the Operating Panel press Options (13 times) until LANGUAGE appears on the LCD screen.
2. Press the right arrow to scroll through the list of languages.
3. Press Select when the correct language is displayed on the LCD screen. This is now your default language.
4. When you power on and off your Lexmark X6100 Series, the default language is the one which remains.
The languages available and supported are the following:
Brazilian - Portuguese
Posted on Apr 05, 2009
try taking out the power brick off the printer. the power brick is where the power cord plugs in behind the printer - the black box. Then, hold down the cancel and start buttons at the same time (w/o the power brick in the printer yet). Plug in the power brick while still holding the 2 buttons firmly. Printer should turn on automatically. Wait for the language selection prompt. Hope this helps.
Posted on Mar 06, 2010
Great job on trying to do it both ways, scanning and copying. Try to refresh the printer by uplugging the power adapter from the printer. The power adapter is the black box behind the printer where the power cord is attached. Make sure other end of the power cord is plugged in straight to the power outlet in the wall, bypass any surge device or power strips. Plugged the power adapter back in the printer after 30 seconds. It should automatically turn on. If not, press the power button. Try scanning and copying again. If problem persists, I strongly suggest you contact Lexmark Technical Support to further investigate the hardware problem in the printer. Hope I can assist you more on this.
Posted on Jun 29, 2010
SOURCE: how do you change the
1 Press the POWER button to turn on the All-In-One
2 Press and hold both the POWER and CANCEL buttons for 10 seconds.
Language text then appears on the display.
3 Press the BLACK COPY button repeatedly until the language you want appears on the display.
4 Press the ARROW button to select that language.
Posted on Mar 22, 2011
Tips for a great answer:
May 30, 2015 | Olympus Sz-15 16mp Digital Camera, Black
Sep 12, 2014 | Office Equipment & Supplies
Feb 07, 2011 | Garmin nuvi 205W GPS Receiver
Dec 29, 2010 | Nintendo Dsi Pink Console
Jul 30, 2009 | HP DeskJet 3650 InkJet Printer
Jun 11, 2009 | Konica Minolta Office Equipment & Supplies
Apr 19, 2009 | Acer Aspire One Netbook 8.9" Notebook
Apr 11, 2009 | Lexmark X125 All-In-One InkJet Printer
Apr 05, 2009 | Lexmark X6170 All-In-One InkJet Printer
Sep 18, 2008 | Konica Minolta magicolor 2300DL Laser...
29 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: