I havE set digital time and how do i set the hands

SOURCE: setting time on casio illuminator watch

http://ftp.casio.co.jp/pub/world_manual/wat/en/qw2747.pdf

There is the manual. The instructions for setting both digital and analog time are on the first page.
Note, if you SCROLL DOWN the link to Casio's website was already posted to find this. I found this information ON THIS PAGE. So if you can't find info by scrolling down, I fear for you with setting this watch. :) It is easy though.

SOURCE: Watch hands don't coincide with the digital time.

This usually occurs when the battery is changed. There should be a process for synchronising the two times detailed in the manual.

To get a manual you go to "http://tissot.ch/" and on the black menu bar at the bottom of the page you will see "product support". Click on this and you will go to a page of instructions. Download yours and find the relevant method for putting your watch right.

Testimonial: "You were right. I downloaded the manual and the synchronisation instructions were there. Still not sure how it happened. But thanks so much!"

SOURCE: Setting the hands on this watch

press your "mode" button 5 times until it says on lower display "H-SET". Then press the "adjust" button until it beeps.

Now hold the "forward" button and the minute hand is moving.

Enjoy :o))))

SOURCE: setting hour alarm in casio illuminator digital watch

how to cancel alarm from casio illuminator wrist watch: press BLB to bring alarm by showing SNZ( alarm mode),thenpress BRB to bring SNZ ,press TLB and keep pressing until hour flashes,pressBRB to set hour.press TLB until hour flashes,release and press BLB ,minuteswill flash,set the time of alarm. BLB:Bottom left button,TLB: top left button

Arturs Kalnins

• 2338 Answers
• Posted on Oct 01, 2010

SOURCE: how do i set the

browse through my tips and you will find link for all Casio watch manual downloads.