Question about Amana ACEX186E Wall/Window Air Conditioner
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: Dead Dryer
I would say to replace the motor. The only thing I would suggest is see where you have power and where you do not have power. If it is plugged into the wall outlet then you should have power going everywhere including the motor. If the motor has power and will not start up then replace it. But I would check EVERYTHING out and make ksure that it is the problem and nothing else is the problem
Posted on Feb 17, 2009
Quite often this is due to grease or food particles stuck to the inside of the oven or stuck on or behind the waveguide cover.
The waveguide cover is usually about the size of a playing card and often held in place by a plastic rivet.
Sometimes it is in the ceiling of the oven.
It can be fragile, and the metal edges of the oven behind it can be sharp, so be careful!
The cover and the metal behind it should be cleaned with a mild, non-ammonia cleaner.
If the cavity metal of the oven is chipped or charred, it will have to be sanded smooth and clean.
Then you can apply some high-temperature appliance paint, available from places like Wal-Mart or Lowe's.
If your waveguide cover is burned, it will need to be replaced.
You can find helpful exploded view diagrams and order parts by entering your full model number here.
If it's not a waveguide problem, it may be a bad high voltage diode or loose high voltage wire inside.
FixYa's Web site is currently not notifying us when replies to our Clarification Requests are posted, so please reply directly to me with your full number from the tag on the unit and your oven's color so I can help you with free do-it-yourself tips or an estimate.
We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.
William E. Miller
Posted on Oct 06, 2009
Testimonial: "great advise! thanks for the help."
check wires to bake ele, there is a sensor and the control panel involved if it is the sensor worth fix , if control panel scrape
Posted on Jan 07, 2010
You have a tub seal that has leaked and the tub bearing has gotten wet and started to rust. This problem will continue to get worse and louder until the tub bearing falls apart. This is a major repair , the parts are not that expensive to replace, ( about $60.00 )but the labor involved is major. In some cases the washer is replaced for this problem. I also would not recommend you attempt this repair yourself. This job takes a professional about 3-5 hours, and sometimes the seal will leak again anyway. If you do decide to attempt this repair I will try to find you a detailed step by step guide. But, be prepaired to replace the machine if the repair fails. It is a major job. I know this is not what you wanted to hear, but its not a horse so shoot it and get another one. that would be my suggestion.
Posted on Feb 10, 2010
Tips for a great answer:
Aug 09, 2011 | Dell 1815dn All-In-One Laser Printer
May 13, 2011 | Amana 24 in. ADB1200AW Built-In Dishwasher
May 10, 2011 | Hitachi Televison & Video
Mar 01, 2011 | Bose Wave Radio
Mar 01, 2011 | GE Dishwashers
Oct 18, 2010 | Rinnai Toyostove Direct Vent Heater:...
Jun 25, 2017 | Whirlpool Washing Machines
Dec 27, 2009 | Computers & Internet
Dec 02, 2017 | Televison & Video
Jun 16, 2008 | Televison & Video
Jul 05, 2012 | Amana ACEX186E Wall/Window Air Conditioner
37 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: