Question about Garmin nuvi 205 GPS Receiver

1 Answer

Screen is off one row. When I push the erase button 0 shows up etc. Can this be corrected?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Garmin Master
  • 2,130 Answers

Yes, recalibrate the screen. Here is the procedure:
Nuvi 2xx/2xxW Series: Turn the Nuvi off. Place your finger on the upper left-hand corner of the screen and then slide the on/off power switch to the left and hold until you see the calibration screen. Note: Some 2xxW models require the procedure below for the 7xx.

Nuvi 7xx Series: Turn the Nuvi off. Touch the screen anywhere and keep your finger there while moving the on/off switch to left (don't wait for Garmin logo to come up) and then quickly moving the switch the right (lock position). After a short while, you will reach the calibration screen. Go through the entire procedure of pressing each dot as it appears on the screen until it says "Done".

Posted on Aug 01, 2013

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Error 5b00 is comming what is the solution


Solve error 5B00

Solution:

  • Press the power button to turn off the printer.
  • Hold the "Stop/Reset" button while pushing the power button.
  • Do not release the power button, release the "Stop/Reset" button and then push it twice in a row.
  • Release the buttons.
  • Wait 20 to 30 seconds until the LED shows 0.
  • Push the "Stop/Reset" button four times in a row.
  • Push the power button twice.
  • Turn off the printer by pushing the power button.
  • That's ok.
http://www.youtube.com/watch?v=RoiBaXVhS7g&feature=player_embedded

Sep 14, 2012 | Canon MP560 All-In-One InkJet Printer

Tip

How to export datagridview data to excel in C#


First, add this to your namespace.<br /><span style="font-weight: bold;">using Microsoft.Office.Interop.Excel;</span><br /><br />Then, copy the codes below and paste it into the export button click event.<br /><br /> <span style="font-weight: bold;">Microsoft.Office.Interop.Excel.Application wapp;</span><br style="font-weight: bold;" /><span style="font-weight: bold;"> Microsoft.Office.Interop.Excel.Worksheet wsheet;</span><br style="font-weight: bold;" /><span style="font-weight: bold;"> Microsoft.Office.Interop.Excel.Workbook wbook;</span><br style="font-weight: bold;" /><span style="font-weight: bold;"> wapp = new Microsoft.Office.Interop.Excel.Application();</span><br style="font-weight: bold;" /><span style="font-weight: bold;"> wapp.Visible = false;</span><br style="font-weight: bold;" /><span style="font-weight: bold;"> wbook = wapp.Workbooks.Add(true);</span><br style="font-weight: bold;" /><span style="font-weight: bold;"> wsheet = (Worksheet)wbook.ActiveSheet;</span><br style="font-weight: bold;" /><br style="font-weight: bold;" /><span style="font-weight: bold;"> if (dataGridView1.RowCount == 0)</span><br style="font-weight: bold;" /><span style="font-weight: bold;"> {</span><br style="font-weight: bold;" /><span style="font-weight: bold;"> mssgbox_noretrieve();</span><br style="font-weight: bold;" /><span style="font-weight: bold;"> return;</span><br style="font-weight: bold;" /><span style="font-weight: bold;"> }</span><br style="font-weight: bold;" /><span style="font-weight: bold;"> try</span><br style="font-weight: bold;" /><span style="font-weight: bold;"> {</span><br style="font-weight: bold;" /><span style="font-weight: bold;"> for (int i = 0; i &lt; this.dataGridView1.Columns.Count; i++)</span><br style="font-weight: bold;" /><span style="font-weight: bold;"> {</span><br style="font-weight: bold;" /><span style="font-weight: bold;"> wsheet.Cells[1, i + 1] = this.dataGridView1.Columns[i].HeaderText;</span><br style="font-weight: bold;" /><span style="font-weight: bold;"> }</span><br style="font-weight: bold;" /><br style="font-weight: bold;" /><span style="font-weight: bold;"> for (int i = 0; i &lt; this.dataGridView1.Rows.Count; i++)</span><br style="font-weight: bold;" /><span style="font-weight: bold;"> {</span><br style="font-weight: bold;" /><span style="font-weight: bold;"> DataGridViewRow row = this.dataGridView1.Rows[i];</span><br style="font-weight: bold;" /><span style="font-weight: bold;"> for (int j = 0; j &lt; row.Cells.Count; j++)</span><br style="font-weight: bold;" /><span style="font-weight: bold;"> {</span><br style="font-weight: bold;" /><span style="font-weight: bold;"> DataGridViewCell cell = row.Cells[j];</span><br style="font-weight: bold;" /><span style="font-weight: bold;"> try</span><br style="font-weight: bold;" /><span style="font-weight: bold;"> {</span><br style="font-weight: bold;" /><span style="font-weight: bold;"> wsheet.Cells[i + 2, j + 1] = (cell.Value == null) ? "" : cell.Value.ToString();</span><br style="font-weight: bold;" /><span style="font-weight: bold;"> }</span><br style="font-weight: bold;" /><span style="font-weight: bold;"> catch (Exception ex)</span><br style="font-weight: bold;" /><span style="font-weight: bold;"> {</span><br style="font-weight: bold;" /><span style="font-weight: bold;"> MessageBox.Show(ex.Message);</span><br style="font-weight: bold;" /><span style="font-weight: bold;"> }</span><br style="font-weight: bold;" /><span style="font-weight: bold;"> }</span><br style="font-weight: bold;" /><span style="font-weight: bold;"> }</span><br style="font-weight: bold;" /><span style="font-weight: bold;"> wapp.Visible = true;</span><br style="font-weight: bold;" /><span style="font-weight: bold;"> }</span><br style="font-weight: bold;" /><span style="font-weight: bold;"> catch (Exception ex1)</span><br style="font-weight: bold;" /><span style="font-weight: bold;"> {</span><br style="font-weight: bold;" /><span style="font-weight: bold;"> MessageBox.Show(ex1.Message);</span><br style="font-weight: bold;" /><span style="font-weight: bold;"> }</span><br style="font-weight: bold;" /><span style="font-weight: bold;"> wapp.UserControl = true;<br /><br /><br /><br /></span><br /> That's all and enjoy...<br /> Larrix<br /> <span style="font-weight: bold;"><br /></span>

on Jul 09, 2011 | Computers & Internet

Tip

How to datagridview to excel in C#


First, add this to your namespace.
using Microsoft.Office.Interop.Excel;

Then, copy the codes below and paste it into the export button click event.

Microsoft.Office.Interop.Excel.Application wapp;
Microsoft.Office.Interop.Excel.Worksheet wsheet;
Microsoft.Office.Interop.Excel.Workbook wbook;
wapp = new Microsoft.Office.Interop.Excel.Application();
wapp.Visible = false;
wbook = wapp.Workbooks.Add(true);
wsheet = (Worksheet)wbook.ActiveSheet;

if (dataGridView1.RowCount == 0)
{
mssgbox_noretrieve();
return;
}
try
{
for (int i = 0; i < this.dataGridView1.Columns.Count; i++)
{
wsheet.Cells[1, i + 1] = this.dataGridView1.Columns[i].HeaderText;
}

for (int i = 0; i < this.dataGridView1.Rows.Count; i++)
{
DataGridViewRow row = this.dataGridView1.Rows[i];
for (int j = 0; j < row.Cells.Count; j++)
{
DataGridViewCell cell = row.Cells[j];
try
{
wsheet.Cells[i + 2, j + 1] = (cell.Value == null) ? "" : cell.Value.ToString();
}
catch (Exception ex)
{
MessageBox.Show(ex.Message);
}
}
}
wapp.Visible = true;
}
catch (Exception ex1)
{
MessageBox.Show(ex1.Message);
}
wapp.UserControl = true;




That's all and enjoy...
Larrix



on Jul 09, 2011 | Computers & Internet

2 Answers

Canon mp287 error 5B00?


hi me uttam jaiswal i have instaled MP287 inkjet but i have problem P07 get any solution

May 20, 2012 | Canon Office Equipment & Supplies

1 Answer

I have a canon pixma mp250 and error P07 flashing.Now,I refill blac and colour cartridges,and clean ink absorber,but still flashing P07.How to reset printer? Best regards, Misko


its mean absorber full..(i think)
Check this steps :
1: Unplug power and USB
2: Open door and hold power button.
3: Connect power.
4: Close door, then release power button
5: Connect USB and an press power to use.

1 Press the power button to turn off the printer.

  • 2 Hold the "Stop/Reset" button while pushing the power button. While still holding down the power button, release the "Stop/Reset" button and then push it twice in a row.
  • 3 Wait approximately 20 to 30 seconds until the LED shows 0.
  • 4 Push the "Stop/Reset" button four times in a row.
  • 5 Push the power button twice.
  • 6 Turn off the printer by pushing the power button one more time. The printer is now reset. Next comes resetting the counter on the cartridge.
  • 7 Unplug the power and the USB cables from the printer.
  • 8 Open the cartridge door and hold down the power button.
  • 9 Reconnect the power cables while still holding down the power button.
  • 10 Close the cartridge door and release the power button. The ink cartridge is now reset.



  • Aug 11, 2011 | Canon Pixma Mp250 Allinone Inkjet Photo...

    1 Answer

    Please tell me how to program my timer. How do I set the time and when it should come on and go off everyday


    Smarthome has the T-1032 pdf manual
    http://www.smarthome.com/manuals/4256.pdf

    27ea898.jpg

    1) Test installation to see if your wiring technique is correct.
    Open cover > set on-off switch to 'ON'
    Press the tiny round reset button with paper clip
    Screen displays 0:00, MO, MAN, OFF
    Close cover
    Push cover inward like a push-button (the cover is the manual override)
    Lights should turn on
    If lights don't turn on, then you need to rewire ... so re-post a re-wire question ... and then come back to this answer to program

    2) Set Time and Day/ Correct time and day are needed for programs to work.
    To start, notice on the screen - in the corners are little letters: MAN, MO, OFF. And to left of time is PM.
    Set the Hour: Press hour button until correct hour shows, including PM or AM
    Set minutes: Press MIN button until correct minutes show
    Set the day. Press day key ... MO in corner changes ... for example TU is Tuesday, WE Wednesday, TU Thursday
    Press one of the control buttons to finish operation

    Programming overview
    :
    Timer allows 7 programs
    Program 1, Program 2 etc
    Each program has ON and OFF time
    So you have to select Program 1
    And then set DAY for Program 1, set ON time for Program 1, and then set OFF time for Program 1
    Next you do the same for Program 2 , and then Program 3, 4 etc to 7
    If you only want Program 1, then you do not need to set Programs 2 thru 7

    Let's program
    :
    Press PGM button ... the timer screen show a P to right of time
    The number 1 appears below P and indicates Program 1

    Set days you want Program 1 to work: Press day button and you can see MO TU WE TH etc appear on screen.
    If you want all week long, press day button until all 7 days appear in tiny print on bottom of screen
    Now you have the Day set for Program 1
    ON time for Program 1
    Notice the screen shows ON ... this means you are going to set the ON time for Program 1
    First, Set hour you want Program 1 to turn ON: press Hour button until correct AM PM time shows on screen
    Last, set minutes to go along with hour: press MIN button until correct ON time minutes show
    You have the day, hour and minute set for ON time

    Set OFF time for Program 1: we are going to set a Day, hour and minute you want Program 1 to turn OFF
    Press PGM button, and notice that OFF appears in top right corner of screen
    Set the day you want timer to turn OFF for Program 1 by pressing DAY button >>> Tip set same days you set for ON times. So if you selected all seven days for ON time, then select all seven days for OFF time
    Set the hour and minute you want Program 1 to turn OFF by using Hour and MIN buttons as before.

    OK, the ON and OFF day, hour and minute are set for Program 1.
    To continue to Program 2, press PGM button until a 2 appears on screen below the P
    If you do not want to set more Programs, then you're finished
    To finish, press any control button
    Close the lid, cross your fingers, you did good

    Sep 30, 2010 | Aube Technologies Aube 7-Day 40-500w Light...

    1 Answer

    A button was pushed on my Dell studio laptop and the screen is reversed. How do I switch back?


    You should hold down the Fn or Function button while pushing the top row of F1, F2, F3 etc buttons until you find the one you probably hit accidentally.

    Apr 22, 2010 | Dell Studio 17 Laptop

    1 Answer

    I need to hear and delete messages on my uniden


    The Uniden DECT6.0 come in various shapes and forms (many models). On the base you should have a button that says Play (or the picture of a play button with the arrows pointing right). Pressing that button will allow you to hear the messages.
    Also, you must have a button that says ERASE or shows a slashed 0. Press the button to erase the messages. You may hear a message telling you to press the button again to erase ALL messages.

    Alternatively, you can play them from the handset. You might have a Play/Arrow button which you press to play messages. When you finish playing messages, you hear the phone reading a few menu options to erase, save etc.

    Jan 28, 2010 | Uniden DECT 6.0 Cordless Phone ID

    1 Answer

    Cannot get "for free service press O.K., etc." off my screen


    Bell has discontinued their process to wipe out the ad. Aastra Telecom manufactures this phone and has a 9 step procedure to clear the Bell I-Select Advertisement. Herre's a copy:
    WARNING: This procedure will permanently erase the Callers List and Directory in your 390 telephone. Please record important names and numbers before implementing this procedure. This procedure disables the programming of the idle screen, so it will not only get rid of the ads permenately but you will also lose the ability to program any of the softkeys on the idle screen as well.



    1) Press the Options button (the short button below the orange Goodbye button)

    2) Press the Down Arrow 4 times or until the cursor points to Area Code and press Show

    3) Press the Down Arrow 2 times or until it points to entry 3.

    4) Press Change

    5) Enter 0099 and press Done 2 times to return to the Options Menu

    6) Press Up Arrow 3 times or until the cursor points to Time/Date and press Show

    7) Set the Date and Time to Jan 01 12:00am and press Done

    8) Press Goodbye to return to idle screen and verify the Date and time are correct



    Before the time changes to 12:01am perform the next step (if the time does change, return to step 7)

    9) Press these keys in sequence: Option, Mute, 0 (zero)



    Your telephone will reset and the Ad message will be permanently erased.

    Mar 25, 2009 | Aastra Telecom Powertouch/Vista 390 Corded...

    1 Answer

    My visonpro Honeywell 8000 digital thermostat's screen is locked and I can't unlock it


    Push the System button, then in the bottom row of empty buttons, press the middle buttton for 4 seconds. The display will change, showing system codes on left and that code's setting on the right.
    Choose 670, and option 0 opens it up completely, option 1 locks it partially. You should not try to override settings the HVAC/Building admin has set for you, in case you are trying to defeat their control.

    May 10, 2008 | Heating & Cooling

    Not finding what you are looking for?
    Garmin nuvi 205 GPS Receiver Logo

    27 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Garmin GPS Experts

    SHARCNET-USA
    SHARCNET-USA

    Level 3 Expert

    2130 Answers

    yadayada
    yadayada

    Level 3 Expert

    76846 Answers

    TO Lady

    Level 3 Expert

    638 Answers

    Are you a Garmin GPS Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...