Download software i misplaced my DCS 5220 DLink IP camera driver so please help me find the link to download the software

http://support.dlink.com/ProductInfo.aspx?m=DCS-5220

Go to this site and download the drivers
Then
Uninstall old drivers and install new ones

New drivers available here
http://support.dlink.com/ProductInfo.aspx?m=DCS-5220

Welcome to Fixya

Try to uinstall and reinstall the software. Ping the camera if you are getting a reply. Reset the camera by pressing the small hole on the side. If everything is already done then same thing occur then you have a defective camera.

Thank you for using Fixya!

If you need further help, reach me via phone at https://www.6ya.com/expert/elixirjose_00375ea24bd8141b

Please follow this process for IP Address:-
http://setuprouter.com/router/dlink/dcs-3110/login.htm

Install the installation disk of the ipcamera. Configure the ipcamera base on your requirements. Then install the ipcamera on the position you require.

Here is the User Manual for D-Link DSC-950G

ftp://ftp.dlink.ru/pub/Multimedia/DCS-950G/Description/DCS-950G_manual_07062005.pdf

For Future Support Visit:- https://www.youtube.com/channel/UCxAhv5XWrbpjvdfVBVEHCMA

Hello,

Try to obtain a new copy of the installer from the manufacturer's website. Make sure you download the appropriate driver for your operating system.

Software, drivers, firmware and manuals located at:
http://support.dlink.com/products/view.asp?productid=DCS-5300

Go to dlink.com. Select IP cameras. At the top is a search using Product Quick Find. Find the 900w and click on it.Select Support Resources. All the firmware and software is there.

http://www.dlink.com/products/?pid=270

go here and on the right under support resources select application.