Question about Kenmore 98702 Stacked Washer/Dryer

Open Question

Model 110 98575120

Does it have a lint trap?

Posted by Anonymous on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

milten1
  • 1304 Answers

SOURCE: Lint is massing toward the bottom of the lint trap

please check your exhaust vent, where the dryer air comes out of the house, this particular pattern is very indicitive of a slow moving exhaust, you may need to clean the duct between the machine and exhaust as well

Posted on Oct 22, 2009

Testimonial: "Thanks, I'll do that!"

  • 2509 Answers

SOURCE: i dropped spray bottle lid

Can you see it? A trick I often use is to find some very sticky tape securely attached with the sticky side out on the end of a stick, and try to touch the lid with it and hopefully it will stick to the tape. On the plus side it probably won't do any harm just to leave it if you can't get it out.

Posted on Jan 27, 2011

  • 15441 Answers

SOURCE: Some objects have fallen down the lint trap in my Kenmore dryer model 592-99057 01. Do I have to remove the front panel or does the lint trap housing come off ?

I don't find any info on that model number. However in most units the front bottom panel comes off, then you can disassemble the fan housing and lint trap. While you are in there take a vacuum cleaner to the whole under side of the unit. Also be sure to disconnect the power first.

Posted on Jan 27, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

An old blanket disintegrated in my washing machine. Where is the lint trap located, so I can clean it? The model number is 41741122310


I am not familiar with a cleanable lint trap in washers, but there may be one in yours.
To find out, type "Searspartsdirect" into your search engine, and when you get that site, type your model number into the correct box and you machine will be displayed for you to look at.
(I did, it works well)
See if you can find a lint trap listed.
God bless your efforts.

Jan 27, 2017 | Washing Machines

1 Answer

Some objects have fallen down the lint trap in my Kenmore dryer model 592-99057 01. Do I have to remove the front panel or does the lint trap housing come off ?


I don't find any info on that model number. However in most units the front bottom panel comes off, then you can disassemble the fan housing and lint trap. While you are in there take a vacuum cleaner to the whole under side of the unit. Also be sure to disconnect the power first.

Jan 27, 2017 | Kenmore Dryers

1 Answer

Where do you find the lint trap on the washer


google the make/model/manual possibly under neath at back tho some have a trap at the front

Mar 12, 2015 | Washing Machines

1 Answer

Kenmore elite he3t where is the lint trap?


Raise up your washer slightly or feel for 3 screws right under the front, bottom. Unscrew these and pull down - you will find the lint trap. Be prepared for water, and since the model is 2002 - immense junk too!
Pl say so if helped!!

Apr 01, 2013 | Kenmore Washing Machines

1 Answer

Is there a lint trap for this model? If so where?


There is no lint trap on these washers. The manufacturers are depending on the dryer to remove 80% of the lint. The only solution they give is when sorting the clothes separate the lint givers from the lint takers. Hope this helps

Sep 02, 2011 | Kenmore 22422 Top Load Washer

1 Answer

Washing machine lint trap


There is no trap per say. The lint catcher is self cleaning when the water is pumped out. It sounds like you are overloading it and the clothes are hitting the agitator. Operation should be agitation by water movement not beat by the plastic fins, run a wash cycle hot water no clothes to flush things out and try smaller loads.
Eric

Mar 14, 2010 | Kenmore 22622 Top Load Washer

2 Answers

No removable lint trap


I would think you can. You need your model number and you can look on line. http://www.appliancepartspros.com/modelnumber_locator.aspx

Jul 11, 2009 | Dryers

1 Answer

Lint is not going into pull out lint trap. The lint screen is torn and lint is collecting behind trap.


Poor air flow would be my guess. How long is the vent hose? Does it have more than one angle/turn before venting outside? Is the lint gathering around the outer edges of the door? Keeping the length of air travel shorter will improve the operation.

May 12, 2009 | Fisher and Paykel DEGX1 Electric Dryer

Not finding what you are looking for?
Kenmore 98702 Stacked Washer/Dryer Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

fordexpert

Level 3 Expert

5467 Answers

Mike Squire

Level 2 Expert

391 Answers

Robert Rankin

Level 2 Expert

338 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...