Question about General Heating & Cooling
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
If your remote control have display but cannot transmit signal to the unit. Confirm first if the remote is really the problem, using your camera or cellphone camera as your eyes point the remote transmitter to your camera and "on" the remote. You should see light emits in your remote control, if no emitted light then the remote control is defective. But if there is a light the defect is in the unit receiver.
Check also if there is a reset or rst button in your remote control and reset it and try.
Check also if there are error codes in the unit, reset the unit by disconnecting the power supply in the unit for 10 sec. and "on" again and try.
The unit can be operate without remote control, use the manual button located in the unit.
If the remote control have no display replacement of remote is recommended.
Posted on Jan 16, 2009
If you contact Fujitsu in your country and you will be able to buy it straight from them, if they are still available. Now I have to warn you as a Fujitsu warrenty agent they are very very expensive.
I would prolly recommend getting a universal remote. ALOT cheaper
Posted on Jan 23, 2009
SOURCE: Dear expert, Our dog chewed up
Get your Dog to the nearest VET immediately. The next thing is to ask your Fijitsu dealer for a spare remote control.
If not then you must check out if the multipurpose remtoe will work out with this model.
Get help from an accessories shop to give a remote to test/replace before buying.
Posted on Sep 11, 2010
SOURCE: We bought a house with
Switch on by pressing ON/OFF. Press mode button to cool position. for cool and keep required temp by clicking
Same procedure for Heat. For heat keep +29 and for cool 25 to 22 degree. Press fan for High, Med,Low. If you keep mode in Auto cool and the fan speed will be low and you can't change fan speed.
Please visit Fujitsu website for further details. Hope my msg is helpful?
Posted on Dec 09, 2010
Tips for a great answer:
Apr 08, 2011 | Fujitsu Heating & Cooling
Aug 07, 2017 | Heating & Cooling
Aug 19, 2010 | Heating & Cooling
Apr 02, 2010 | Fujitsu FPCRC05 Remote Control
Mar 23, 2009 | General Heating & Cooling
Jan 15, 2009 | Heating & Cooling
Dec 01, 2007 | Heating & Cooling
104 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: