Question about Jenn-Air Kitchen Ranges
I have a Jenn Air Down draft slide oven Model # JGS9900BDS16. All of a sudden the "Warming drawer" light has turned on whenever I turn the fan on. I called Jenn Air and they had no direction on what the problem could be. Since the oven does NOT have a warming drawer I assume this is some sort of code for an error. I tried turning off the power for 1 min, and leaving the oven alone for another 5 with no success. The fan is blowing in the correct direction (I had been using the oven for more than 1 year). Any ideas?
If it is not affecting the performance of the machine, disregard it.
Posted on May 26, 2016
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
most common fault is the cooling fan is failing to come on, whreas the fan will be okay ( check windings with ohmn meter ) it will normally have a ceramic 10k resitor in series with the live which goes open circiut
Posted on Jan 07, 2008
SOURCE: Oven light won't turn off
It sounds to me like the switch that operates the light is malfunctioning. You're taking the right steps by pressing the switch by hand. Since that didn't work, either that switch is not working or there is another switch that is intended to keep the light on while the door is closed. You can look at that one too. The last thing to consider is if the light is relay controlled, the relay might be stuck closed and applying power to the light all the time.
Posted on Mar 09, 2008
Why are the oven indicator lights flashing?
When power is first supplied to the appliance, a flashing time will appear on the display.
If a flashing time appears at any other time, a power failure has occurred. Press Cancel, and reset the clock if needed.
When the oven is not in use, the display shows the time of day.
If the indicator lights keep flashing after you have tried to reset the controls, then you may need to contact service person.
This is from the Jenn-Air website.
Posted on Mar 17, 2008
SOURCE: Jenn-Air electric range
my jen-Air has a problem with it continuing to beep. Ive tried to get it to stop by pushing all the buttons. When I pust the off/cancel button it just keeps beeping. Tried the stop timer button and same thing. When I turn on either the bake or convection bake button it automatically just shuts off by itself. It is approx 10-13 years old. HELP, or please tell me to get a new one.
Posted on Oct 23, 2008
An F-1 error code on your model means the element was energized when it should not have been, A shorted interconnect harness or failed power relay board.
A probe indication could be a failed meat probe jack or bad harness in a unit that has one. In a unit without a meat probe, suspect a bad board.
Both conditions would warrant bringing in a tech.
Before you do, turn off the circuit breaker fot 3 miutes and turn it back on. This will reboot the boards. If problem persists, the call a service tech.
Posted on Nov 04, 2009
Tips for a great answer:
Dec 18, 2014 | Jenn-Air Ovens
Dec 05, 2011 | Jenn-Air SVE47100 Slide-In Electric...
Nov 08, 2011 | Jenn-Air SVE47100 Slide-In Electric...
Nov 04, 2009 | Jenn-Air SCE30600 Slide-In Electric...
Sep 24, 2009 | Jenn-Air SVE47100 Slide-In Electric...
Jun 07, 2009 | Ovens
Feb 19, 2009 | Jenn-Air JJW8530C Expressions Collection...
Nov 20, 2007 | Jenn-Air SVE47100 Slide-In Electric...
Nov 15, 2007 | GE JBP68 CleanDesign Electric Kitchen...
May 10, 2017 | Jenn-Air Kitchen Ranges
Mar 20, 2017 | Jenn-Air Kitchen Ranges
613 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: