Question about Kenwood Audio Players & Recorders

1 Answer

Kenwood KT56 need a code that will work

The original remote is lost. The unit powers on but no volume. I need either a code that will work with a universal remote (I have an all4one) or a way to adjust volume manually. I have tried all Kenwood codes I can find on line-even if they were not for tuners. To no avail. And yes I contacted Kenwood, which was no help. Thanks for any help you can provide.

Posted by on

  • 3 more comments 
  • Janice Hamilton Aug 02, 2013

    Receiver, only has speaker outlets on it. It does have 2 outlet jacks on the back and inputs for other stereo components to plug into. But only "output jacks" are marked speaker L and speaker R

  •  Grubhead
    Grubhead Aug 02, 2013

    Unless you are describing something else The Kenwood KT56 is a tuner, therefore just a radio. It has no amplification on it at all. What you describe as "speaker" jacks are the left and right output jacks to connect it to an amplifer. The other connections on it you describe are to connect FM aerials etc.

  •  Grubhead
    Grubhead Aug 02, 2013

    http://www.webstore.com/cache/cache_500_...

  •  Grubhead
    Grubhead Aug 02, 2013

    If you paste that address into your browser it will show an image of the front and rear of the service manual just to confirm we are talking about the same device.

  •  Grubhead
    Grubhead Aug 05, 2013

    Sorry the link doesn't work so I will add the image to this message.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Kenwood Master
  • 5,190 Answers

Of course it has no volume the KT56 is a radio tuner! It needs to be connected to a power amplifier to hear anything. The audio out sockets need to be plugged into a stereo amp that has speakers. The KT56 is not a stand alone device!

Posted on Jul 30, 2013

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
SparkGap
  • 363 Answers

SOURCE: remote control code

You need to let us know the make and exact model number of the universal remote. All universal remotes do not use the same codes. We'll try to help you control your technics sa-gx100 upon your reply.

Posted on Sep 29, 2007

  • 1 Answer

SOURCE: Need the remote control code/s

I google'd remote codes for this device. code 1007 seems to work as far as volume controls and the off/on switch goes.

Posted on Nov 18, 2008

  • 1 Answer

SOURCE: I have AV10 universal remote

i have a manual here for av10 univ remote control do u want to give me the model and tl check it?

Posted on Jun 08, 2009

  • 50 Answers

SOURCE: Need a code for my Comcast Universal Remote

30176 is the code you need . Press Aux and then hold setup until Aux lights up. Enter code. If you want the remote to control the receiver all the time, press Aux and then hold setup until Aux lights up. Enter 993 then press Aux. Aux will flash, now press Cbl and Aux should light up when you use the volume.

Posted on Jul 06, 2009

  • 1 Answer

SOURCE: verizon fios remote codes for samsung receiver

I have the Samsung Sound Bar WS1R model. I tried all of the Samsung codes; TV, audio receiver, and audio amplifier. The DVD code 3918 worked for my Verizon FiOS remote. Program it to your AUX button and it will control the volume while your other buttons; channel, menu, etc work the set top box. I hope it works for you too!

Posted on Mar 28, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a kenwood vr506 amp . the remote no longer works.i have bought a one for all universal remote and need the code for the kenwood amp.


setup codes for cd players - HiFi Remote

www.hifi-remote.com/hag/setup_codes.htm
Sep 15, 1999 - If you are unsure whether your universal remote uses 3 digit or 4 digit ... SETUP CODES FOR AMPLIFIERS ... 0078 JVC 0331 Kenwood 0356 Linn 0269 Luxman 0165 Magnavox 0269 ... GE 0240 LiteTouch 0084 Lutron 0318, 0597 One For All 0167 .... 0048 may require TV code 0093 for volume and mute.

vcr set up codes - HiFi Remote


Feb 16, 2015 | One For All Televison & Video

2 Answers

NEED SECURITY CODE FOR KENWOOD KDC-MP7028


KENWOOD SECURITY CODE CLEAR procedure


Your radio will require one of the following procedures.

Type 1
During the code request mode, while holding the DISP key depressed, press and hold the Volume UP or DOWN key for 3 seconds (so that “…” disappears).
Then using your remote enter your code.

Type 2
Press the "Auto" button and "Track up" on face of radio at the same time. The four dash lines ( . . . . ) should "disappear".

Then using your remote enter your code.

Type 3
Model# DPX-4020 and DPX-4030
Press and hold the 1 then the 6 preset key (preset keys are the buttons on face of radio for storing you "favorite" radio stations). "C" should display.
Then using your remote, enter your code.


Enter your number from the remote control unit. Your code number is 5227 (KCAR)

* Press numeric key “5” ( 2 times ) and press the Track UP/Next Track key
* Press numeric key “2” ( 3 times ) and press the Track UP/Next Track key
* Press numeric key “2” ( 1 time ) and press the Track UP/Next Track key
* Press numeric key “7” ( 2 times ) and press the Track UP/Next Track key

The security is canceled and the set enters the TUNER mode!

Dec 10, 2007 | Kenwood KDC-MP7028 CD Player

1 Answer

Hi. lost the code for my car stereo. its a kenwood CD RECEIVER KDC-6080R the long number on it is KE0638M0501308 help help


The following procedures work on some Kenwood models, you can try these and see if either of the work. Hopefully it helps.

KENWOOD SECURITY CODE CLEAR procedure
Your radio will require one of the following procedures.
Option 1
During the code request mode, while holding the DISP key depressed, press and hold the Volume UP or DOWN key for 3 seconds (so that "..." disappears).
Then using your remote enter your code.
Option 2
Press the "Auto" button and "Track up" on face of radio at the same time. The four dash lines ( . . . . ) should "disappear".
Then using your remote enter your code.

Sep 19, 2013 | Car Audio & Video

1 Answer

I have a kenwood receiver vr507 is the model my remote for the unit came with the receiver in the box the remote model is rc-r0720 now it wont work the receiver no more it was working fine and i move set...


Hi William
Assuming that you have tried changing the batteries in the remote (and put the batteries in the right way round) then the chances are that your remote control unit has failed.
Original Kenwood remotes can be bought here http://kenwoodremote.com/

Universal remote controls are widely available in electrical stores and on the internet. You will need to find the right set up code - you should be able to find the code on the same site.

Feb 10, 2011 | Kenwood VR-507 Receiver

2 Answers

Kenwood KDC-MPV619. No remote. Need unlock code for deck.


I had the same problem with my kdc-mpv619. I had bought a new truck that didn't have a remote and the screen says enter code. You do need a remote to fix it, but what they don't tell you is a universal remote will work. I used my direct tv remote and looked up all the codes for kenwood.

The one that worked for me was 30337 (not sure if that would work for you).

1) The way I tested it was go to my stereo and I held down the display button + volume up button. (This should remove the - - - - sign but it will still say CODE).

2) Then you press the 5 button on the remote and if the screen says CODEK then you know the remote works.

(to switch from K to C to A to R press the (>>) button on the screen.

3) Enter the code KCAR (the display will say CODEKCAR)

4) Final Step is hold do the fast forward button (>>) on the screen.

It should work for you after that ;-)

Apr 30, 2009 | Kenwood KDC-MPV619 CD Player

2 Answers

Kenwood ddx512


The unlock code usually only goes on if you previously put one on there. I would suggest calling Kenwood but there is a guy that claims he can fix this i have never tried this but you can. http://mike-unlockcodes.blogspot.com/

Apr 24, 2009 | Kenwood DDX-512 Car DVD Player

1 Answer

Kenwood stereo control amplifier KC-206 doesn't work


I was able to use an universal remote control that I have, a Radio Shack Kameleon 6 in one remote control which I was able to program to run the audio portion of the Kenwood KC 206 control preamp. By adjust the remote sensor volume to max, I was able to get maximum volume out of the unit and drive the power section very nicely. Now I have to get up and manually turn the manual volume control for addition volume adjustment.

Hopefully Ken can find a remote that he can control the Kenwood control preamp the same way I did. Good luck here.

Dec 02, 2008 | Audio Players & Recorders

2 Answers

DNX7100 Security Code Password


While code request mode,point the remote control to the unit and enter this code 55222277or 552222777(depending the remote contro you are using)(try to press the numbers that faster you can) that is way you type KCAR from the remote control.
you will not see any change on the screen while you entering the number,only when you enter the last number the unit will go to standby mode.
if you make a mistake,reset the unit and start all over again.

let me know if works
thank you

Nov 15, 2008 | Kenwood DNX7100 Car Video Player

1 Answer

Remote code


1. programed RCVR with code 0314
2. then assigned a key (such as the TV/VCR key) with the EFC number of 300
3. then reprogramed RCVR w/ code 0027

498 "surround mode"
568 "+10"
578 "band"
370 "stereo"
702 "6"
444 "4"
447 "2"
317 "8"
701 "0" (zero)
450 "7"
704 "5"
707 "3"
449 "1"
577 "9"
384 "tape 2"
252 "mute"
255 "vol down"
512 "power"
515 "vol up"
572 "channel down"
257 "channel up"
Try This an see if works

Oct 19, 2008 | Kenwood VR-209 Receiver

27 Answers

Forgot my code.


What button should I push if I don't have an "auto" button, both on the remote or the head unit? I have a dNx-5140. All help would be appreciated.

Aug 27, 2007 | Kenwood KDC-MP4028 CD Player

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

105 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenwood Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5190 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

da surgen

Level 2 Expert

92 Answers

Are you a Kenwood Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...