Question about Polycom SoundPoint IP 331 IP Phone

Open Question

Firmware updates Details: 1) Upgraded the Boot Rom ( Updater ) 4.4.0.0080, Boot Block version: 3.0.2 0024. 2) Used Polycom_UC_Software_4_1_0_Rev_I firmware 3) Used SoundPoint_IP_BootROM_4_4_0B_Upgrader 4) Using the Centralized provisioning server FTP & DHCP ( with option ntp, 160, 66, 43, & 120 ) for downloading the configuration. 5) Used Lync Device.cfg ( attached for your reference) 6) After booting the Phone shows network is down & reboots continuously, 7) After 20 ~ 25 reboots the SIP log in option will come, if given correct details it logs in to lync 8) If end point is restarted again, it takes 20 ~25 reboots to get in to sip login page.

Posted by on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

brodie7838
  • 11 Answers

SOURCE: i am unable to push the configuration files into polycom soundpoint ip 330 through tftpd

This means the phone's SIP application has been erased. You will need to download the SIP app and BootROM from the Polycom support page, host the files on a boot server, and then point the phone to this server from the server menu so the phone will reboot and download the files.

http://www.polycom.com/support/voice/soundpoint_ip/soundpoint_ip330_320.html

Posted on Jan 12, 2010

  • 2 Answers

SOURCE: i have polycom SoindPoint 301

1st. Get the IP address of the phone. and type that into browser.
*- default user: Polycom / password: 456

*- Under menu SIP, type in your voip provider
*-Under menu LINES type in user info and "secret" should be your password.

Make sure your ports are open (SIP is usually 5060) you can change it in that same config screen.

Posted on May 04, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Sansa/Sandisk m240/1.GB Firmware information. I would like to be able to download firmware software for this device. If not a link for the older version of the firmware. Or maybe some suggestions for...



good day sir hope that this will help you to your problem....

What is a firmware, and what does a Sansa Firmware Updater do? Firmware defined
Firmware is the software code that powers your Sansa player. SanDisk actively and periodically updates the capabilities, functionality, and reliability of your Sansa player through this firmware. For optimal experience with your Sansa player, SanDisk recommends that you update your firmware with each new release.Firmware updates are free.


Sansa Firmware Updater
The Sansa Firmware Updater is an application designed to deliver the latest firmware, software support, User Manuals right to your desktop.

Download Sansa Firmware Updater.

Sansa players supported by the Sansa Firmware Updater:
- Sansa c200 series
- Sansa Clip / Clip+
- Sansa e200 series
- Sansa Express
- Sansa Fuze
- Sansa Fuze+
- Sansa View
Supported OS:
Windows 7, Windows Vista, Windows XP, Windows 2000 SP4

NOT supported:
Mac & Linux

NOTE: Administrative access is needed on your PC to run the Sansa Firmware Updater.

if this help you please rate me sir thanks you...

Jun 05, 2011 | Computers & Internet

Tip

How to flash the mobile and download recent


<span>Updating Nokia Mobile Phone Firmware Here I'll tell you the things you need to do in order to update the embedded firmware in your Nokia cell phone.<br />Things to do before a firmware update:<br /> <ol> <li>Install <a href="http://europe.nokia.com/A4144903">Nokia PC Suite</a>, and back up all the stuff from your phone to your computer. <li>Charge your phone battery to its full level. <li>Beware that any hindrance (like power off, etc.) during the update process can damage your phone.</li></ol>Let's get started.<br /> <ol> <li>In your Nokia mobile phone, type in <b>*#0000# </b><br />Your Nokia mobile will now display the firmware version it's running <li>Carefully open the back case of your mobile, and also take away the battery. <li>Note the product number down <li>Go <a href="http://europe.nokia.com/A4577224">here</a> and type the product number. You'll now know if a new version of firmware for your Nokia mobile phone is available <li>Download the Nokia Software Updater. Click <a href="http://europe.nokia.com/A4176089">here</a> to download it <li>Install the Nokia Software Updater (I think it's recommended to run it if you have more than 256 MB of RAM on your computer) <li>Connect your Nokia mobile phone via the USB port, and also make sure your computer is connected to the internet <li>Run the Nokia Software Updater by clicking on the icon on your desktop <li>The Nokia Software Updater connects to the internet, checks for updates, and then detects your phone to start installing firmware updates for your Nokia phone <li>You might see some fuzzy things going on in your Nokia phone, and that's perfectly normal to happen during a firmware update <li>When all's done, the updater gives a confirmation message and then the phone restarts <li>You can now disconnect the phone from the computer</li></ol>That's how you upgrade your Nokia mobile phone's firmware. Let me know in the comments if you have any question</span>

on May 08, 2011 | Cell Phones

2 Answers

3110c says phone memory full with only 575 contacts. I used to have 1500 contacts. Upgraded the firmware to latest version. How can I get the unit to accept the 2000 contacts it is originally designed to...


Hi,
If your able to switch on your phone then try this
To reset your Nokia phone please follow this.
Press 3370#
It would reset the phone to factory settings.
The default code is 12345

or

If your phone is not starting please press these buttons simultaneously.
onoff + + 3
It would reset the phone to factory settings.
The default code is 12345

If still the problem persist scan your phone for any virus.Your phone is affected by virus.If stilll problem persist you have to flash your phone.

Jan 11, 2011 | Nokia 3110 Cellular Phone

1 Answer

Canon IPF8000..... i need to override the "ink


Before removing the used print head, be sure to update the printer?s firmware version with the included CD-ROM. An error message will be displayed on the printer?s display when the new print head is installed without updating the version. In this case, re-install the used print head and update the firmware version.

Updating the firmware

1. Turn on the power of the printer. Check that the printer is online.

2. Run the file setup.exe in the FirmUpdate folder in the CD-ROM. [GARO Firmware Update Tool] will be installed.

3. Run [GARO Firmware Update Tool] from Programs in the Start menu.

4. By following the instructions, update the firmware version.



1. Turn on the power of the printer. Check that the printer is online.

2. Select the OS89 folder in the FirmUpdate folder in the CD-ROM, and run [GARO FirmUpdate]. [GARO Firmware Update Tool] will be installed.

3. Run [GARO Firmware Update Tool] from [Applications] - [GARO Firmware Update Tool] folder.

4. By following the instructions, update the firmware version.



1. Turn on the power of the printer. Check that the printer is online.

2. Select the OSX folder in the FirmUpdate folder in the CD-ROM, and run [GARO FirmUpdate].

[GARO Firmware Update Tool] will be installed.

3. Run [GARO Firmware Update Tool] from [Applications] - [GARO Firmware Update Tool] folder.
4. By following the instructions, update the firmware version.
Precautions when updating the firmware version
- Use [GARO Firmware Update Tool] after checking that the printer is online.
- Do not turn off the power of the printer while firmware data is being transferred.
- If the printer?s firmware is already the most recent version, the Status of the target printer will be displayed as ?Update Finished? when using [GARO Firmware Update Tool].

Techbelkin

Dec 13, 2010 | Canon imagePROGRAF iPF8000 Printer

2 Answers

I want to update it software version via USB cable


Nokia 6300 firmware update
Subject: how to update firmware for Nokia 6300 to the latest official version

1. You need download and install NSU - Nokia Software Updater (http://europe.nokia.com/support/download-software/device-software-update/download#) and run it to ensure that all is ok! (don't forget to switch on and connect Nokia 6300 via USB with PC)
2. You need to download and install NSS (Nemesis Service Suite) (http://www.b-phreaks.co.uk/index.php?main_page=page_2), the latest version of NSS was 1.0.38.15 (select "Virtual USB Device" mode)
3. Close NSU if it's not closed and load NSS then click icon "Scan for new device"
4. Click icon "Phone Info" and button "Scan" inside it
5. If all is ok you'll see some lines with Phone Version, Phone IMEI and so on
6. Click button "Read" and remember your "Product Code"
7. If your want to clean your phone go to tab "Tools" and switch to subtab "Factory Setting", choose option "Full Factory" then press button "Reset" (NOTE!!! all personal data and settings will be cleared!)
8. Return to tab "Phone info" and type in the field "Product Code" the following code 0537621 (or any code from (http://www.expansys-usa.com/ft.aspx?k=96957)) for version 7.21, or code 0557624 (or any code from (http://www.a2phone.com/6300-rm-217-dp20-900-sw-0730exe)) for version 7.30, select option "Enable" then press button "Write"
9. Close NSS, run NSU
10. Now NSU should update firmware to version 7.21/7.30 (or any latter build) (http://europe.nokia.com/support/download-software/device-software-update/can-i-update)
11. Repeat stages 3 - 5
12. Type in the field "Product Code" the code that you remembered before, select option "Enable" then press button "Write"
13. Close NSS
14. Use you clean phone with new firmware!

Mar 17, 2010 | Nokia 6300 Cellular Phone

1 Answer

Hi: My computer is not recognizing my ts-h492a


Hi,

Please go here and download the live update from Samsung. This software is designed to automatically update you to the latest firmware via the internet. To get this service, customers have to install the Firmware LiveUpdate program on their computers.

Please download the live update full version if you have not used this software before. See link.
http://www.samsungodd.com/Eng/Firmware/liveupdate.asp

Simply follow the instructions as given and your software will be updated to the latest version required to run your CD/DVD writer with your computer.

Hope this helps. If so please do leave a vote for the solution. Thanks.

Mar 01, 2010 | Samsung TS-H492A/RSWN CD-RW/DVD-ROM...

2 Answers

Nokia 1650 Firmware Update


Normal 0 false false false MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} Updating Nokia Mobile Phone Firmware Here I’ll tell you the things you need to do in order to update the embedded firmware in your Nokia cell phone.
Things to do before a firmware update:
  1. Install Nokia PC Suite, and back up all the stuff from your phone to your computer.
  2. Charge your phone battery to its full level.
  3. Beware that any hindrance (like power off, etc.) during the update process can damage your phone.
Let’s get started.
  1. In your Nokia mobile phone, type in *#0000#
    Your Nokia mobile will now display the firmware version it’s running
  2. Carefully open the back case of your mobile, and also take away the battery.
  3. Note the product number down
  4. Go here and type the product number. You’ll now know if a new version of firmware for your Nokia mobile phone is available
  5. Download the Nokia Software Updater. Click here to download it
  6. Install the Nokia Software Updater (I think it’s recommended to run it if you have more than 256 MB of RAM on your computer)
  7. Connect your Nokia mobile phone via the USB port, and also make sure your computer is connected to the internet
  8. Run the Nokia Software Updater by clicking on the icon on your desktop
  9. The Nokia Software Updater connects to the internet, checks for updates, and then detects your phone to start installing firmware updates for your Nokia phone
  10. You might see some fuzzy things going on in your Nokia phone, and that’s perfectly normal to happen during a firmware update
  11. When all’s done, the updater gives a confirmation message and then the phone restarts
  12. You can now disconnect the phone from the computer
That’s how you upgrade your Nokia mobile phone’s firmware. Let me know in the comments if you have any question.

Oct 21, 2009 | Nokia 1650 Cell Phone

2 Answers

Nokia n73 after disconnecting from software updater is not workin


so u have messed with ur software update dnt wrry go in a nokia care nd tell them to update ur software version of phone ur owrk is done.....

Aug 30, 2009 | Nokia N73 Cellular Phone

1 Answer

I have a lg DVD-RAM Model no GH22NP20 its not run data cds & DVD-RAM.


need to check firmware version then update it

Here's how to get LG's Auto Firmware Updater
Go here :
http://www.lge.com/support/software.jsp
Select
> Location = North America > USA/ Canada
Then
> Product = DVD-ROM (writer)
> Operating System = Vista
> Subject = LG Auto Firmware Download


Download the .zip file to your Desktop
You'll need to "Extract All" from the .zip
and then run the setup file
You'll need to allow Internet Access ( AV/IS )
The Updater will probably need to Update itself - before being active


To Manually Search For Firmware Updates
> Product = DVD-ROM (writer)
> Operating System = Vista
> Subject = Firmware

Look through the Listings for your Specific Drive
I would recommend Disabling the LG Auto Firmware Updater
- from Windows Start-up
You can open the Updater at any time - from All Programs

Apr 26, 2009 | Computers & Internet

1 Answer

Pic and vidos


I believe all you need to do is go to SanDisk's website, under Downloads, then download the Firmware Updater: http://www.sandisk.com/Retail/Default.aspx?CatID=1376
After installation of Sansa Firmware Updater
* Please make sure your Sansa player is in MSC mode before plugging it in.
* Plug in your Sansa player and it will automatically check for updates.

Common questions about the Sansa Updater

Q: What does the Sansa Firmware Updater do?
A: The Sansa Updater is an application that checks for the latest firmware updates then downloads and installs the firmware to your Sansa device. The Sansa Updater is NOT a firmware.

Q: Why do I need to install the Sansa Firmware Updater to download "firmwares"?
A: Once you install the Sansa Updater, you don't have to worry about which firmware to download for your device. Sansa Updater downloads and installs the right firmware for your Sansa device.

Q: Do I need to install the Sansa Firmware Updater everytime there's a new firmware?
A: No, once the Sansa Firmware Updater is installed, future firmware updates are done by just plugging in your device.

Q: What does a "firmware" do?
A: Firmwares contain miscelleneous bug fixes and enhancements.

Q: Which Sansa players is the Sansa Updater compatible with?
A: The e200, c200 and m200 series

Q: Should I "Open","Run" or "Save" when i click on "Download Sansa Firmware Updater"?
A: "Open" and "Run" would automatically start installing the software,. "Save" would save it to your computer and you can run it in the future. We suggest you "Open" or "Run" the installer.

Q: How to change to MSC mode:
A: On your Sansa device, press "menu" and go to "Settings" then "USB" choose "MSC"

Q: How to check for firmware version?:
A: On the e200 and c200, press "menu" and go to "Settings" then "Info"/ "System Info". For m200, press "menu" then "Information".

Nov 12, 2008 | SanDisk Sansa e260 MP3 Player

Not finding what you are looking for?
Polycom SoundPoint IP 331 IP Phone Logo

Related Topics:

66 people viewed this question

Ask a Question

Usually answered in minutes!

Top Polycom Computers & Internet Experts

Clive Gray

Level 3 Expert

1479 Answers

Michael Vincent Cruz

Level 3 Expert

868 Answers

Justin
Justin

Level 3 Expert

2072 Answers

Are you a Polycom Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...