Question about Televison & Video
Samsung HT-E8200 soundbar with built in blu-ray player
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Black Bars on all blu ray movies
Having black bars displayed when watching a Blu-Ray disc is a common occurrence, even with a widescreen television.
You may have heard or seen aspect ratios of 4:3 or 16:9. 4:3 is the ratio of a traditional television that is nearly square. 16:9 is the ratio of most widescreen televisions currently marketed. The reason that even with a 16:9 television Blu-Ray discs are displaying black bars is that many of these discs contain footage that has not been reformatted for television. The screen in a movie theater is even wider than 16:9, and rather than trim the ends, most Blu-Ray discs maintain the entire picture.
Depending on the options available in your particular television, you may be able to find a zoom setting that trims the ends and removes the black bars. It is up to you if you would rather see black bars with the entire picture or lose a small amount of the picture on each side for a full-screen experience.
Hope this helps,
Go Ahead. Use Us.
Posted on Jul 23, 2008
The latest firmware is version 1.3 If you do not already have that version I have supplied a link below that will allow you to download it.
This issue is typical with Blu-Ray... You will need to update your firmware frequently to keep up with the constant changes that are made when studios add new features to the disc's.
Check the link from time to time since this is where Samsung will post their new firmware downloads for your player.
Posted on Dec 29, 2008
Haven't tried it, but found this online somewhere....
1. Open tray and remove any disks in tray.
2. Close tray.
3. Switch Off Player and Unplug from mains wait 30 seconds (this clears RAM)
4. Reconnect to mains
5. Turn on player with remote.
6. Press ENTER on remote.
5. Press 8, 4, 2, 6, 9.
7. Press ENTER on remote. (The tray will open)
8. Switch off power from remote, then switch back on.
9. Player is now Region Free.
Posted on Mar 22, 2009
Well I Checked my data resources and saw that there are no hacks or tricks for Sharp yet... the only thing you can try doing now is to ask your Dealership if they can unlock the regions for you. I've searched everywhere but couldn't find anything for newer models like HDDVD or Blu-Ray players.
Sorry T_T But let's hope someone might be able to help as well..
Posted on Mar 31, 2009
SOURCE: Unlocking of Samsung BD-P1500
I have a new BD-P1500, and after 5 Times
The trick seemed to be not holding the repeat key too long.
I have a Region B/4, running
I used the R4 code from below.
1) Turn on the player with no disc in the tray
Wait till the unit is at the Samsung logo screen.
2) Open then close the tray, wait to see the No-Disc Message in the top Left Corner
3) Now press the REPEAT button on the remote, followed by a five digit code.
In this case Repeat 76884
Now it to me about 5 tries to get this to work, It needed to be done without delay.
So if you don’t get it to work straight away don’t loose heart.
4) When it works a 4 will appear in the top left corner
5) Press 9 to make it regionless.
6) Press Eject to OPEN to open the disc tray.
7) Press Eject to CLOSE to close the disc tray.
8) Power the unit off
9) Now power the unit on again, it should now read all regions of DVD Disc.
From other threads I got the follow list of region codes.
R1 - 29334
R2 - 57538
R3 - 56732
R4 - 76884
R5 - 53814
R6 - 24462
Report this hack (requests/questions/spam/wrong/****).-->
Region code hack posted by wasgo, September 17 2008:
I have tried the hack mentioned above on my new BD-1500 and couldn't make it work. But the software in it is about a month newer.
Does anybody have any new ideas how to solve the problem?
I have the region 2 version (Sweden)
Posted on May 25, 2009
Tips for a great answer:
Nov 18, 2016 | Samsung Televison & Video
Jan 11, 2015 | Samsung BD-HM57C - BD-HM57C Wi-Fi Blu-ray...
Jan 28, 2013 | Samsung BD-UP5000 Blu-ray and HD-DVD...
Jan 25, 2011 | Sony DVP-NS51P DVD Player
Aug 31, 2010 | Samsung BD-P1590 Blu-Ray Player
Jan 27, 2010 | Samsung BD-P1500 Blu-Ray Player
Feb 17, 2009 | Samsung DVD-V4600 DVD Player/VCR
Jan 22, 2009 | Samsung BD-UP5000 Blu-ray and HD-DVD...
Dec 29, 2008 | Samsung Televison & Video
Aug 01, 2008 | Televison & Video
38 people viewed this question
Usually answered in minutes!