Question about Standard (CRT) Televisions

1 Answer

Lxi television got an lxi tv from second hand shop. it has an onscreen scrolling menu i cannot turn off. the remote for the lxi tv is hard to read since used. i have no instruction manual for it. the Dish is hooked up and works with dish remote but doesnt turn off this problem on the screen.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer
Re: lxi television

I am looking for how to change my tv into video mode without the remote and found an answer for your problems....

Posted on Jul 17, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


6 Points

Related Questions:

1 Answer

How do I remove the blind voice over on my Techwood 19" TV model 19884H DDVD

Hi, Go to settings menu, then go to other settings, then scroll down to audio description and hard of hearing and turn both off!

Jan 01, 2015 | Standard (CRT) Televisions

1 Answer

How to switch tv over to play games on wii

press menu button and look for source or input and manually do it onscreen, different buttons scroll through choices, enter button selects choices

Aug 20, 2012 | Toshiba 30HF66 30" TV

1 Answer

How do you get to the auxillary channels or the channel where the DVD player or video games would go? I have a DVD player hooked up to the TV, but it only goes from channels 2-69 with no auxillary/video...

Do you have the original remote? If you do, you need to press the input button (on the left below 7 and above the DVD controls). The external device must be on before you scroll through the available inputs. Unfortunately, I'm not sure if the OnScreen Menu has an option to toggle the Input (since there is a Menu button on the TV it would work around the issue).

A substitute remote that should access all of the TV features including the Input is available here:

I hope this helps.

Cindy Wells

Jul 10, 2010 | RCA 32V420T 32" TV

1 Answer

Add or delete channels on LXI tv

I have a Phillips LXI 46in TV. How do you save channels?

Jun 15, 2009 | Philips TP2784C TV

1 Answer

Will a remote work with this tv?

A universal remote will most likely work at least the most needed features. When shopping for a universal remote, look on the back of the package for a skeleton list of models to see if LXI is covered.

Jun 14, 2009 | Standard (CRT) Televisions

1 Answer

LXI TV-menu options keep scrolling. How do we stop this?

I believe pressing the VOLUME UP and VOLUME DOWN buttons at the same time is what puts the set into demo mode. (It might be CHAN UP and CHAN DOWN at the same - been so long I'm not sure, but I think it's the volume buttons.)

Nov 08, 2008 | Standard (CRT) Televisions

8 Answers

RCA 20F420T FPA lock

Most RCA and GE TV sets use a four digit code to control the v-chip. The code reset procedure is different depending on the model. Try each method until you find one that works:
  1. Hold down MENU on the remote and VOLUME DOWN on the TV it’s self at the same time for at least 4 seconds. The set won't say so, but the lock will be unlocked
  2. Hold down the 0 on the remote and the VOLUME DOWN buttons on the TV its self at the same time for at least 4 seconds. The set won't say so, but the lock will be unlocked
  3. Hold down the MENU button on the front of the TV and the TV button on the remote at the same time for at least 4 seconds.
  4. Hold down GO BACK on the remote and MENU on the front of the TV at the same time for at least 4 seconds.
  5. Hold down EJECT on the front of the TV and the MENU button on the remote at the same time for at least 4 seconds.
Depending on the model, one of the methods should unlock the V-chip. Now, if desired, you can change the settings on the V-chip by going to the MENU and going to PARENTAL CONTROLS, or on some sets, going to MENU and then going to TV SETUP, then to V-CHIP SET.

Jan 21, 2008 | RCA 20F420T 20" TV

2 Answers

Locked out of TV

Use two buttons on the tv at the same time, hold four seconds.
Try menu & power or vol up & chan up.........

Nov 04, 2007 | Standard (CRT) Televisions

2 Answers

Persistent menu on screen pop ups

I just had a similar problem, and it turned out that one of the little rubber buttons was pushed down and had gotten stuck under the plastic housing just enough to create contact, but hardly enough to notice at first glance.

May 05, 2007 | Zenith C27A24T 27" TV

2 Answers

Can't see scrolling text or sport scores

Here's how to fix it - I have a PF 2425, and it's driven me absolutely up the wall. Videogames are useless because you can't even see the crucial gauges etc. Likewise, subtitles and credits in films are cut off. it's ridiculous, especially considering how easy it is to fix (if you know how).

1. Decrease volume to 0.
2. Press MUTE so the tv says "MUTE" onscreen.
3. Hold MUTE on the REMOTE and MENU on the TV simultaneously until the service menu appears.

It's important not to screw around here too much. Use your arrows on the remote to navigate, the first option likely will say "MENU.0" or something like that. Use that to flip through the pages. What you're looking for are values like V Zoom, V Scroll, etc. Same goes with the H values. Toy with these a little and you'll be able to get the tv scanning perfectly.

I can confirm this worked for me! So good luck.

Dec 08, 2006 | Apex Digital PF2725 27" TV

Not finding what you are looking for?
Standard (CRT) Televisions Logo

Related Topics:

3,020 people viewed this question

Ask a Question

Usually answered in minutes!

Top Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

66623 Answers

matt martin
matt martin

Level 3 Expert

1187 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides