Question about Garden

Open Question

18"craftsman chainsaw -new -model # 358.350280 chain not oiling

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 95 Answers

SOURCE: my 18 " craftsman chainsaw will not oil the chain.

Take the bar off and clean the grove out with something like a small flat blade screwdriver.Make sure its open where it bolts on.It gets its oil through the bolt holes.If you have a way to blow the dirt out it helps.You can try running the saw without the bar on to see if its putting out any oil.If not you will have to get to the oil pump to see if its not bad.

Posted on Mar 08, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I install the throttle valve and butterfly on a craftsman chainsaw


Always take pictures or make notes to help out like a road map if you left fuel li new attached to the other it will then be noticed

Sep 19, 2014 | Craftsman sears 18" Chain Saw Chain (...

1 Answer

What is the equivalent Poulan model to the Craftsman 4218 chainsaw?


I bet if you pretend to shop for parts on JACKSSMALLENGINE dot COM they will say "also fits Poulanxxxxx"

Dec 02, 2013 | Craftsman sears 18" Chain Saw Chain (...

1 Answer

Crafstsman chainsaw model 35.8352180


http://sophiesophieshops.ecrater.com/p/6490866/sears-craftsman-owners-manual-23a-23

Apr 01, 2013 | Craftsman sears 18" Chain Saw Chain (...

1 Answer

Craftsman 18" chainsaw runs but dies when I press the throttle, new carb and fuel lines low and high speed set at 1 turn .


remove the muffler and run it after seeing that it runs good open the muffler and clean the screen inside

Sep 27, 2012 | Craftsman sears 18" Chain Saw Chain (...

1 Answer

Describe your sears 18"


I put a new bar and chain on my craftsman 18" chainsaw because the chain keeps coming loose. I am still having the same problem, after running 10 seconds, the chain falls off.

Sep 11, 2011 | Craftsman sears 18" Chain Saw Chain (...

1 Answer

My 18 " craftsman chainsaw will not oil the chain.


Take the bar off and clean the grove out with something like a small flat blade screwdriver.Make sure its open where it bolts on.It gets its oil through the bolt holes.If you have a way to blow the dirt out it helps.You can try running the saw without the bar on to see if its putting out any oil.If not you will have to get to the oil pump to see if its not bad.

Mar 08, 2011 | Craftsman sears 18" Chain Saw Chain (...

1 Answer

Chainsaw model #358.35181 will not start can I get a manual for this


You can locate the manual directly through www.searspartsDirect

or:

http://www.managemylife.com/mmh/owner_manuals/search?sid=MMHMxSearsx00019&query=358351810+CRAFTSMAN

Then click on "View Manual"

Sep 27, 2010 | Craftsman sears 18" Chain Saw Chain (...

1 Answer

Have a craftsman # 358.350880 saw will not accelerate and lacks power


Check the fuel filter, air filter, and muffler for plugging. Check the fuel lines for decay or other damage. Make sure the carburetor fasteners are tight. Check for proper chain oiling by running the saw at speed for several moments with the bar tip near some cardboard--it should throw off a thin line of oil. Hope this helps!

Aug 13, 2010 | Craftsman sears 18" Chain Saw Chain (...

2 Answers

Poulan oiler don't work


Common problem with Poulan and Craftsman gas saws. Take off the chain and chain guide and clean out all the saw dust etc. Start saw without chain and look for port where there are signs of oil. If port is clear of sawdust, then it is likely the pump which is located behind the chain break assembly. you can get the diagram on Poulan website and the replacement pump will cost about $15 - $20 to replace yours.

May 22, 2009 | Poulan Pro 42CC 2 Cycle Chainsaw, 18"

Not finding what you are looking for?
Garden Logo

Related Topics:

46 people viewed this question

Ask a Question

Usually answered in minutes!

Top Garden Experts

Dennis Key
Dennis Key

Level 3 Expert

2478 Answers

john h

Level 3 Expert

12104 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

Are you a Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...