Question about Sharp AR 163 Copier

3 Answers

Sharp ar-162 locked up, toner light flashes, run sim, main moter does not turn. replaced both power supply and main board and main toner moter, still not operating

Posted by on

  • brianenglish May 21, 2008




3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

We are a manufacturer of toner chip and toner cartridges for laser printer .
To tell you a good news,now we have worked out many new chips with almost the best quality in China,Such as Epson Aculaser M2000D toner chip,Samsung CLP-350 ,HP Black Universal chip,HP 1600/2600,3600,Kyocera Kyocera TK-715,675,130,140,310,312,320,322,330,332 etc chip,HPC1215 chip,Lexmark C522 chip,Samsung CLP-300 chip ,Xerox C1110/Dell 1320 chip,HP 36A ,Epson 2600,HP 2020,HP 2025,HP 2035,HP 2055 ,HP P4014,HP P4015 etc chip etc...
Sales Manager
Company: Printer Color Technology Co., LtD
Address: Room 402,Unite 1,Building 22,Sheng Fu Da Yuan,Beijing Westroad No.69,Nanchang City ,Jiangxi Province,China Tel:86-0791-6207670 Fax:86-0791-6207670 Mobile:0086-13576261899 MSN:,

Posted on Apr 13, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Dear Sir ,

How are you?

We are a manufacturer of toner cartridge chip.
To tell you a good news,now we have worked out many new chips with almost the best quality in China,Such asSamsung CLP-350 , HP Black Universal chip,HP 1600/2600,3600,Kyocera Kyocera TK-715,675,130,140,310,312,320,322,330,332 etc chip,HP C1215 chip,Lexmark C522 chip ,Samsung CLP-300 chip ,Xerox C1110/Dell 1320 chip,HP 36A ,Epson 2600 etc chip etc...
We are an expert in manufacturing printer cartridge chips.Our quality is very good and we have always done our best to improve and improve it.Our website is You can login to learn more about us.And there is no limit for your order quantity in our company.You can place your test order to test our quality first.
We'll also attend The 5th REChina Asia Expo on Nov 10th to 12th Shanghai Exhibition Center NO.1000 Middle Yan An Road in Shanghai.Our booth number is W2125.I hope I can meet you there if you attend the exhibition as well.
Our quality guarantee is 100%return whenever there is any defective one.And our defectiveness rate is lower than 0.3%.Moreover,we usually won't ask our customer to return the defective one in case there is any.We'll send the same quantity of new chips to our customer make up for the defective one directly in their next order for the high shipping freight and small quantity.
The following is the our detailed information ,please check.
company name:Shenzhen Acro-colorful Technology Co,Ltd
Contact person: Sherry Huang
Address:Room 518,Mao Ye Art Trading Plaza,Busha Road,Buji Town,Longgang District,Shenzhen,China
My Skype:sherryhuang000001
I am really looking forward to working with you!

Best wishes!
Sales Manager
Acro-colorful Technology Co.,LTD
Room 518,Mao Ye Art Trading Plaza,Busha Road,Buji Town,Longgang District,Shenzhen,China
Post Code:518118

Posted on Sep 25, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert who has answered 20 questions.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

  • Expert
  • 163 Answers


Posted on Sep 08, 2007

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Konica 215 Toner moter is not running in toner supply mode. It also not running in normal coping. We change moter,dc board.

Did you replace the drum and developer units run the TCR adjustment since the TCR sensor determines if toner is needed if not needed no signal to main board to turn on the toner motor. You might have just need a new drum and developer unit not a motor and power supply. It would have been more likely it was the main board and not a DC power supply.

Btw, I’m available to help over the phone in case u need at

Jul 13, 2017 | Konica Office Equipment & Supplies

1 Answer

I have a sharp aquos LC-C6554. steady blinking green power light. replaced power supply boards and just replaced the main board. No change. Could it be the inverters?

Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis.
To some model sets; especially LED back-lighted types; the back-light inverter circuit will be part of the main power supply board [SMPS]. In such cases, the power supply board might need replacement. To some models sets, the back-light inverter and SMPS section circuit will be integrated at its main board itself. If so; the main board should be replaced. To some models of sets, all these section circuit will be integrated at its main board. If this is the case, you have to replace the main board.

May 26, 2016 | Sharp Televison & Video

1 Answer

Due to a power surge, my Sharp AR-M277 won't turn

There is a 20A fuse on the AC power board it is most likely blown. Follow the power cable to the board the big white ceramic fuse is the main, check continuity with meter and replace.

Sep 02, 2011 | Sharp AR-M277 Digital Copier Copier

2 Answers

Que significa el codigo f2-02 de una copiadora sharp ar-m25

me marca codigo f2-02 copiadora sharp AR M455N
ke puedo hacer sera que es le chip o el cartucho.

Oct 01, 2010 | Sharp AR-M257 Black and White Copier

4 Answers

Ar-5316 showing error ch

CH steady means cover is open. Close either front or right cover well.
CH blinking means developer unit or toner cartridge not installed. Remove and return well and firmly.

Nov 22, 2009 | Sharp AR-5316 Advanced Digital Imager...

2 Answers

The start button won't turn green when power turned on.

if the machine needs toner you will be able to change paper size & reduction but the machine will not come to ready[green ready light lit]. so if the machine keeps running after you turn it on it needs toner. if you leave it on for lets say 15 min. does it give you an add toner light or an error code?

Dec 15, 2008 | Sharp AR-160 Copier

1 Answer

My sharp copier AR-5320 just stopped copying and displaying a H

check main power supply socket and plug for blown out fuse,if it doesnt work open the cover on the left hand side to access the power supply board check the fuses if blown replace with the same rating.

Nov 27, 2008 | Sharp AR-5320 Black and White Copier

1 Answer

AR-207 copier has "CH" flashing what to do?

CH code is usually associated with the Crum chip located on the back of the toner cartridge that gets 5 volts dc from the power supply and resets a counter on the main board to tell the copier approximatley how much toner you have when you insert an new toner. What may have happened, is the same 5 volts dc is shared with the laser unit and the when the laser goes bad it may cause the CH code just before it gives the E7-03 code for the laser due to the 5 volts being drawn down by the bad laser. If turning the machine off and back on with the new toner doesn't fix it then you either have a bad chip on the new toner or a bad LSU (laser Scanner unit)

Please don't forget to rate our answers please.

Dec 14, 2007 | Sharp AR-207 Copier

1 Answer

Toner light flashing, won't copy

Definately check and see if you are getting the motor current from the motor driver board and main pcb, before buying it. That should do the trick

May 14, 2007 | Sharp AR-164 Copier

Not finding what you are looking for?
Office Equipment & Supplies Logo

546 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Office Equipment & Supplies Experts

Anthony Karuku

Level 2 Expert

257 Answers


Level 3 Expert

8080 Answers


Level 3 Expert

2237 Answers

Are you a Sharp Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides