Question about Haier HLP23E Top Load Washer

2 Answers

Leaking water from the hose connections - Haier HLP23E Top Load Washer

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Had the same problem w/the water inlet w/initial installation. When the water inlet was hooked to the faucet and into the washer, water leaked on the washer end. The manual tells you to put a new "flat" washer (provided) in the washer machine water inlet, but water still leaked. It's actually the not flat washer, it's more of an "U" shape washer that goes into the washer machine water inlet and fits right over the filter in the water inlet valve. Leak was solved, but faucet was on and water was not filling in the drum. Turn power on, select cycle, water level, and press start and water should start filling the drum.

Posted on Jan 10, 2014

  • JulieS
    JulieS Jan 10, 2014

    Had the same problem w/the water inlet w/initial installation. When the water inlet was hooked on both ends, water leaked on the washer end. Manual tells you to put a new "flat" washer (provided) in the washer machine water inlet, but water still leaked. It's actually the not flat washer, it's more of an "U" shape washer that goes into the washer machine water inlet and fits right over the filter in the water inlet valve. Leak was solved, but faucet was on and water was not filling in the drum. Turn power on, select cycle, water level, and press start and water should start filling the drum.

×

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 19 Answers

Gasket rings may need to be replaced adapter tight? Hoses tight?

Posted on Nov 29, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why is My filter hose leaking at the neck right before connection to tightening hose to filter under the sink.


Sounds like either the hose has a hole in it, it isn't seated right, or it isn't tightened sufficiently at the connection. Most often, leaks by the connection are actually leaks at the connection and the water is running down the pipe a bit. Try turning the water off in the main system or at any valve before the connection and then tightening the connection another quarter turn. While directions caution us to be careful not to tighten too tightly, we must insure that our connections are sufficiently tight so that the water doesn't leak out. You may also take the connection off and make sure you have a layer of plumber's silicon tape on the threads and then put the connection back together, making sure it is tight enough so that there are no leaks. Less likely, but possibly, the hose may have a small hole in it. In this case, the water is likely spurting out of the hole rather than slowly leaking down the pipe.

Sep 18, 2014 | Kenmore 22.0 cu. ft. Side-By-Side...

Tip

How to troubleshoot water leaks


Water leaks in a washer are often difficult to trace. There are many possibilities to look for. The problem could be a loose connection, a broken hose, a cracked component, or a defective seal. It could also be a hole in the tub. If a hole in the tub is the problem, it's usually best to replace the washer.

Most leaks can be eliminated by tightening water connections and replacing deteriorated components. To stop a leak:

-
Check the lid seal. If faulty, replace with a new gasket.

- Check the hoses at faucet connections. Tighten connections or replace hoses.

- Check the hoses at water valve connections. Tighten connections or replace hoses.

- Check the drain hoses. Tighten connections or replace hoses.

- Check the inlet nozzles. Tighten connections or replace nozzles.

- Check the splash guard. Tighten connections or replace.

- Check any plastic valve. Tighten connections or replace.

- Check the outlet hose to drain. Tighten connections or replace hose.

- Check the water pump, using the procedures that follow.

on Jan 16, 2010 | Washing Machines

1 Answer

My 1990 toyota corolla is getting hot really fast - i fill radiator up and after 5-10 min the water has evaporated - it appears to be leaking somewhere around the right side of engine (facing front of car)...


Well there are only 3 things that could have gone wrong.

1. Radiator Leak - this means the radiator has developed a hole with via corrosion of the metal parts of simply integrity failure of the plastic parts of the radiator.
2. Hose leak - this could be a hole in 1 of 2 hoses that connects the engine to the radiator. Or it can also be a leak where the hose connects to the radiator (clamp Failure).
3. Water Pump breakdown - this is where the gasket in the water pump has failed and is leaking out the water rather than pumping it.

All the problems above has different ways of diagnosing. but we can probably narrow it down.

1. if the leak is near the radiator then it could be a hose connection, hose breakage or Radiator hole.

2. if the leak is nearer the engine then check the other end of the hose and if its not there then it could only be the water pump is leaking. You can check this if there are water stains on the water pump. The water pump on a 1990 corolla is mechanical turned also by a fan belt. Look for a pulley that has a hose connected to the radiator and that would be the water pump.

Nov 02, 2010 | 1990 Toyota Corolla

1 Answer

Connected shower head to hose and the hose connection to shower head leaks back toward line. There is a white end over the inside of the end of the hose. I believe this restriction is causing the line to...


I understand that the white vac breaker end should be connected to the valve not the hand shower. FYI a little leak from this connection when the water is switched off is normal.

Sep 27, 2010 | Water Pik Shower Head

1 Answer

Whirlpool dishwasher Leaking water


Hello there:
Troubleshooting Leaks
If the dishwasher leaks, and you know the problem is not related to tub overfilling, the pump, or inlet valve problems, the plumbing connections may be faulty. Most dishwashers are connected to the water supply with metal pipe fittings, and the leak could be at these fittings. If the fittings are threaded, tighten them with an adjustable wrench. If this doesn't work, chances are the threads are stripped or the fitting is cracked or otherwise damaged. In this case, replace the fitting.
Most dishwashers discharge used water through a pipe or a hose connected to the drain or garbage disposer under the kitchen sink. If the drain line is made of flexible hosing, it may have cracked from prolonged exposure to hot water. Examine the hose; if it's damaged, replace it. If the hose is leaking at its connections with the disposer or dishwasher, tighten the fittings or clamps at the connections, or replace the clamps. Also check for water leaks around inlet valves, drain valves, and anywhere you see flexible hoses and hose connections. Leaks at clamps can be stopped by tightening or replacing the clamps. Leaks in hoses can be eliminated by replacing the hoses.
I HOPE THAT YOU FIND THIS INFORMATION VERY HELPFUL
BEST REGARDS MICHAEL

Nov 13, 2009 | Dishwashers

1 Answer

Old admiral clothes washer leaks at front


Troubleshooting Water Leaks

Water leaks in a washer are often difficult to trace. There are many possibilities to look for. The problem could be a loose connection, a broken hose, a cracked component, or a defective seal. It could also be a hole in the tub. If a hole in the tub is the problem, it's usually best to replace the washer.

Most leaks can be eliminated by tightening water connections and replacing deteriorated components. To stop a leak:

Step 1: Check the lid seal. If faulty, replace with a new gasket.

Step 2: Check the hoses at faucet connections. Tighten connections or replace hoses.

Step 3: Check the hoses at water valve connections. Tighten connections or replace hoses.

Step 4: Check the drain hoses. Tighten connections or replace hoses.

Step 5: Check the inlet nozzles. Tighten connections or replace nozzles.

Step 6: Check the splash guard. Tighten connections or replace.

Step 7: Check any plastic valve. Tighten connections or replace.

Step 8: Check the outlet hose to drain. Tighten connections or replace hose.

Step 9: Check the water pump, using the procedures that follow.

Aug 25, 2009 | Maytag PAV2300 Top Load Washer

1 Answer

Lots of tiny bits of rubber flakes have comeoff door seal and are stiuck to washing


hi Most dishwashers discharge used water through a pipe or a hose connected to the drain or garbage disposer under the kitchen sink. If the drain line is made of flexible hosing, it may have cracked from prolonged exposure to hot water. Examine the hose; if it's damaged, replace it. If the hose is leaking at its connections with the disposer or dishwasher, tighten the fittings or clamps at the connections, or replace the clamps. Also check for water leaks around inlet valves, drain valves, and anywhere you see flexible hoses and hose connections. Leaks at clamps can be stopped by tightening or replacing the clamps. Leaks in hoses can be eliminated by replacing the hoses.

Sep 13, 2008 | Washing Machines

1 Answer

The water does not drain out. Water in tub bottom


hi Most dishwashers discharge used water through a pipe or a hose connected to the drain or garbage disposer under the kitchen sink. If the drain line is made of flexible hosing, it may have cracked from prolonged exposure to hot water. Examine the hose; if it's damaged, replace it. If the hose is leaking at its connections with the disposer or dishwasher, tighten the fittings or clamps at the connections, or replace the clamps. Also check for water leaks around inlet valves, drain valves, and anywhere you see flexible hoses and hose connections. Leaks at clamps can be stopped by tightening or replacing the clamps. Leaks in hoses can be eliminated by replacing the hoses.

Sep 13, 2008 | Amana Dishwashers

1 Answer

Dishwasher leaking at the bottom of the door during operation.


hi If the dishwasher leaks, and you know the problem is not related to tub overfilling, the pump, or inlet valve problems, the plumbing connections may be faulty. Most dishwashers are connected to the water supply with metal pipe fittings, and the leak could be at these fittings. If the fittings are threaded, tighten them with an adjustable wrench. If this doesn't work, chances are the threads are stripped or the fitting is cracked or otherwise damaged. In this case, replace the fitting.
Most dishwashers discharge used water through a pipe or a hose connected to the drain or garbage disposer under the kitchen sink. If the drain line is made of flexible hosing, it may have cracked from prolonged exposure to hot water. Examine the hose; if it's damaged, replace it. If the hose is leaking at its connections with the disposer or dishwasher, tighten the fittings or clamps at the connections, or replace the clamps. Also check for water leaks around inlet valves, drain valves, and anywhere you see flexible hoses and hose connections. Leaks at clamps can be stopped by tightening or replacing the clamps. Leaks in hoses can be eliminated by replacing the hoses.
thanks....................

Sep 12, 2008 | Whirlpool Dishwashers

Not finding what you are looking for?
Haier HLP23E Top Load Washer Logo

272 people viewed this question

Ask a Question

Usually answered in minutes!

Top Haier Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1460 Answers

Owen Barnes

Level 3 Expert

867 Answers

shaun taylor

Level 3 Expert

1525 Answers

Are you a Haier Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...