Question about Sewing Machines
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: material will not feed across
This machine has a pressure regulator on the left side.You should look to see that it is not loosened. When you lift up on the presser foot it should have resistance.
Then look at the feed dogs to see that they are moving, Set the stitch length at 4 and turn the hand wheel. The teeth should move towards the back of the machine. They should also be slightly above the needle plate as they go back and below the surface of the plate as they come forward.
If they don't rise above the plate , remove the needle plate and clean between the slots of the teeth.
Posted on Jul 01, 2008
I remember stocking that model, the only place you may get one is www.sewingonline.co.uk/instructions or www.sewusa.com
Posted on Apr 04, 2010
I dont think the top thread spool feed is the problem, I sounds like the upper thread tension is set at too low a number. Normally on that model it should be set at 3 to 6.
Posted on May 07, 2010
Tips for a great answer:
Nov 19, 2016 | New Home Sewing Machines
Sep 30, 2016 | New Home Sewing Machines
Aug 24, 2015 | New Home Sewing Machines
Mar 25, 2015 | New Home Sewing Machines
Aug 05, 2014 | New Home Sewing Machines
Jul 12, 2013 | Janome Sewing Machines
Mar 24, 2013 | Sewing Machines
Apr 10, 2012 | New Home Sewing Machines
33 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: