Question about Office Equipment & Supplies
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Unfortunately, the Russian software does not work on a Mac, and it crashes at launch when installed in WZ98 under Virtual PC. However, I found this on another site, and it worked immediately:
The sequence to reset the waste ink counter is as follows:
WASTE INK ROM RESET ONLY 870, 1270
1. Turn the printer off using the power button on the panel of the printer.
2. Disconnect the interface cable at the back of the printer.
3. Hold down the "LOAD/EJECT" and "CLEANING" buttons simultaneously.
4. Turn the printer on. Release all buttons as soon as paper out light flashes.
5. Quickly press (within 3 seconds while PAPER OUT light is flashing) the "CLEANING" button for 10 seconds.
6. Release the button and the printer will initialize.
7. Once initialization is complete, turn the printer off.
8. Reconnect the interface cable.
9. Turn the printer on
Works great, no muss...no fuss!
Posted on Apr 29, 2009
The simplest way to do this is to grab a copy of the A10_IPR utility that Epson distribute to their customers...
The utility is available to North American customers if you register no this site page http://www.epson.com/ipr/
The utility is also know to be available in the wild if you search for "waste ink ipr".
Just remember to scan any download using a virus and malware scanner before you attempt to use it as some utilities contain trojans or similar nasties.
Hope that helps.
Posted on May 12, 2009
U can find resetter (SSC Utility or R265 Adjusment) at indoreset.blogspot.com. Reset the waste ink counter.Good luck.
Posted on May 29, 2009
First of all go to devices and printers and look for your printer in there. if it is in there make sure it is set as default you can right click on it and select properties check everything is correct.
If not try using add printer and installing it again
Posted on Mar 22, 2010
Tips for a great answer:
Feb 28, 2011 | Epson Stylus R265 InkJet Photo Printer
Jan 25, 2010 | Epson Stylus R265 InkJet Photo Printer
Nov 26, 2009 | Epson Stylus R265 InkJet Photo Printer
Jun 03, 2009 | Epson Stylus R265 InkJet Photo Printer
Jun 02, 2009 | Epson Stylus R265 InkJet Photo Printer
May 29, 2009 | Epson Stylus R265 InkJet Photo Printer
Mar 12, 2008 | Epson Stylus R265 InkJet Photo Printer
25 people viewed this question
Usually answered in minutes!