Question about Tecumseh Garden
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
con rod bolt torques are 150 in/lb or 12.4 ft/ lb
cyl head bolt torque is 220 in/lb or 18.5 ft/lb
here is website for parts and manual
i would torque them in this sequence
start from bolt centre top , then bolt centre bottom, then bolt left upper , then bolt btm right, then bolt bottom left , then bolt upper right , then bolt centre left
should be 7 bolts 5/16 x unc
check out website its good so is www.partstree.com
Posted on Aug 17, 2010
Tips for a great answer:
Sep 14, 2014 | Motorcycles
Jun 04, 2014 | 2010 Toyota Yaris
Jul 08, 2012 | 1979 Harley Davidson XLH 1000 Sportster
Fig. 7: Location of the cylinder head retaining bolt holes
Fig. 13: Cylinder head bolt torque sequence for 2.2L engines
Tighten bolts in sequence, tighten the long bolts to 46 ft. lbs. (63 Nm) plue 90 degrees. Tighten the short bolts to 43 ft. lbs. (58 Nm) plue 90 degrees.
Mar 18, 2011 | Chevrolet Cavalier Cars & Trucks
Mar 30, 2010 | 1999 Pontiac Grand Am GT
69 people viewed this question
Usually answered in minutes!