Question about Microwave Ovens

Open Question

EMPISAL 65E MICROWAVE OVEN REPAIR MANUAL

THE OVEN IS DISPLAYING PF.WHAT DOES THIS MEAN?

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 182 Answers

SOURCE: My whirlpool microwave/oven combo is displaying a "DOOR" error message, and the microwave won't work. I have replaced a 20a bus fuse and all 3 door micro switches... It is still displaying the "DOOR"

When microwaves first got popular I used to be a helper with my next door neighbor who fixed them. I does sound like you should have covered it with those switches. If you close the door very slowly, pulling back on the door see if you can hear all 3 switches clicking. You should be able to hear them easily. If you only hear the first 2 try pushing on the door to hear the 3rd. If it will click with pressure on the corners or in the middle then you door is tweaked, possibly from pulling on the door hard to open it or smacking into something on the edge. If you can hear all 3 switches and it still wont start then its going to be the sensor that receives the signal from the switches. I'm not sure how accessible those are on today's models since they make them as disposables now, back then they cost around $500 so they were serviced.

Posted on Apr 03, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

5E display on maytag microwave


<- Let me know your full model number from the tag on your oven so I can give you detailed information repair.

Unless there is grease or moisture on your control circuit board, "SE" means you have a shorting membrane keypad.

Jan 05, 2014 | Maytag MMV1153A Microwave Oven

1 Answer

One day the microwave just showed PF on the screen, unplugged and plugged in tried to use it, worked for 30 seconds, stopped and showed PF again. Any ideas? It is only a few years old and used in our...


PF is Power Failure. Check and see if the Oven has a reset switch or power button. Try and hook up an extension cord, plug one end into a usable output (wall plate) and the other into the 110VA line plug attached to the Oven. Turn on....if it works then the problem is a circuit breaker or wall interface. If it fails with the extension, then it is an electrical problem with the microwave device itself. If there are no Reset features on the oven, an internal fuse may blow, or other shorts are occurring. The cost to fix is more than a new unit. Lowes has them as low as $150.00.

Dec 18, 2013 | GE Spacemaker JVM1640SJ Microwave Oven

1 Answer

What does "PF" error message mean?


It means power failure. The power might have gone off in your house. Try resetting the clock.

Aug 31, 2013 | General Electric Microwave Oven

1 Answer

Displaying error F6. What does this mean?


It would depend on the full model number of your oven.

If it has a 721 prefix, it was made by Whirlpool (by LG) and has a stuck cook relay, which we can repair very simply for $39.95 in most cases.

So please post a new help request or contact me directly with your full model number and detailed symptoms.

A full Sears/Kenmore model number has 3 digits, a dot, then 8 more digits, such as ###.########

Jun 06, 2011 | Kenmore 66292 Microwave Oven

1 Answer

I have a Kenmore over-the-stove microwave oven that is not heating food. Everything else works. I received a message of PF on the keypad. Is there anything I can do before I have to call a repair...


PF - Power Failure - PF error code indicates a power failure during the cycle.
Press and HOLD start to continue the cycle, or press off/pause to clear display.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Apr 13, 2010 | Kenmore 62702 Microwave Oven

1 Answer

Got code PF and control keypads not working?


Hello :

PF indicates power failure . Displays this message after it has been unplugged or if there has in fact been a power failure .

good luck .

please rate !

Apr 02, 2010 | GE Spacemaker JVM1640SJ Microwave Oven

1 Answer

Kenmore built in microwave displaying "D" and wont heat.


"d" may mean demo mode. The first thing to try is a "hard reset". Unplug it from the power outlet for 10 minutes, plug it back in, set the clock, then try again.

Jun 06, 2009 | Kenmore 62622 Microwave Oven

Not finding what you are looking for?
Microwave Ovens Logo

Related Topics:

57 people viewed this question

Ask a Question

Usually answered in minutes!

Top Microwave Ovens Experts

William Miller
William Miller

Level 3 Expert

9047 Answers

yadayada
yadayada

Level 3 Expert

75117 Answers

Cindy Wells

Level 3 Expert

5060 Answers

Are you a Microwave Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...