Question about Craftsman Garden

Open Question

Where is the brake switch model 917.27681

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Would a brake pedal position sensor failure effect the operation of the brake lights


year/make/model?? The brake lights are controlled/activated by the brake switch attached to the brake pedal. This switch if defective will affect the operation of the brake lights. On some makes/models, the brake light circuit also runs through the signal light switch which will also affect brake light operation if defective

Jan 04, 2016 | Cars & Trucks

1 Answer

Where is rear brake light switch on 1982 sportster 1000


Hi Anonymous, this problem is usually cause by the front brake light switch being out of alignment or the button not retracting all the way keeping your brake light on in a closed circuit, depending on your model year. 1996 and earlier models the right handlebar switch housing had to be tight up against the front brake control housing in order for the front brake light switch button to be fully compressed to stop continuity. In 1997 and later models the button was alot shorter and was more of an alignment issue in the switch housing. Rear brake light switches located in the rear brake line TEE can also fail in the closed circuit condition but extremely rare, usually they fail in an open circuit condition where the brake light is not able to activate. For a free wiring diagram please visit the website below and good luck. Harley Davidson Wiring Diagrams and Schematics

Aug 28, 2013 | Harley Davidson XL 1200 C Sportster Custom...

1 Answer

Flhx foot brake light not working


Hi Anonymous, this problem is usually cause by the front brake light switch being out of alignment or the button not retracting all the way keeping your brake light on in a closed circuit, depending on your model year. 1996 and earlier models the right handlebar switch housing had to be tight up against the front brake control housing in order for the front brake light switch button to be fully compressed to stop continuity. In 1997 and later models the button was alot shorter and was more of an alignment issue in the switch housing. Rear brake light switches located in the rear brake line TEE can also fail in the closed circuit condition but extremely rare, usually they fail in an open circuit condition where the brake light is not able to activate. For a free wiring diagram please visit the website below and good luck. Harley Davidson Wiring Diagrams and Schematics
Testing and replacing Harley Rear Brake Light Switches

Apr 19, 2013 | Harley Davidson FLHX Street Glide...

1 Answer

2005 Harley davidson FLHTC Brake Light switch troubleshooting


Hi Anonymous, this problem is usually cause by the front brake light switch being out of alignment or the button not retracting all the way keeping your brake light on in a closed circuit, depending on your model year. 1996 and earlier models the right handlebar switch housing had to be tight up against the front brake control housing in order for the front brake light switch button to be fully compressed to stop continuity. In 1997 and later models the button was alot shorter and was more of an alignment issue in the switch housing. Rear brake light switches located in the rear brake line TEE can also fail in the closed circuit condition but extremely rare, usually they fail in an open circuit condition where the brake light is not able to activate. For a free wiring diagram please visit the website below. Good luck and have nice day.
Harley Davidson Wiring Diagrams and Schematics

Feb 16, 2013 | Harley Davidson FLHTC - FLHTCI Electra...

1 Answer

Rea stop lt doesnt work with foot control brake lts and turn signals work as always with Front brake lever Is there another brake Lt. switch beyond first one from mastercylinder of rear brake lt. Brake Lt...


Hi Anonymous, this problem is usually cause by the front brake light switch being out of alignment or the button not retracting all the way keeping your brake light on in a closed circuit, depending on your model year. 1996 and earlier models the right handlebar switch housing had to be tight up against the front brake control housing in order for the front brake light switch button to be fully compressed to stop continuity. In 1997 and later models the button was alot shorter and was more of an alignment issue in the switch housing. Rear brake light switches located in the rear brake line TEE can also fail in the closed circuit condition but extremely rare, usually they fail in an open circuit condition where the brake light is not able to activate. For a free wiring diagram please visit the website below and good luck. Harley Davidson Wiring Diagrams and Schematics

Jan 22, 2013 | 2002 Harley Davidson FLSTF - FLSTFI Fat...

1 Answer

Where is the brake switch in a 1993 harley davidson sportster 883


Hi Anonymous, this problem is usually cause by the front brake light switch being out of alignment or the button not retracting all the way keeping your brake light on in a closed circuit, depending on your model year. 1996 and earlier models the right handlebar switch housing had to be tight up against the front brake control housing in order for the front brake light switch button to be fully compressed to stop continuity. In 1997 and later models the button was alot shorter and was more of an alignment issue in the switch housing. Rear brake light switches located in the rear brake line TEE can also fail in the closed circuit condition but extremely rare, usually they fail in an open circuit condition where the brake light is not able to activate. For a free wiring diagram please visit the website below and good luck.

Jul 21, 2012 | 1993 Harley Davidson XLH Sportster 883

1 Answer

Where is rear brake switch located on a 2009 hd heritage? brake light stays on.


Hi Anonymous, this problem is usually cause by the front brake light switch being out of alignment or the button not retracting all the way keeping your brake light on in a closed circuit, depending on your model year. 1996 and earlier models the right handlebar switch housing had to be tight up against the front brake control housing in order for the front brake light switch button to be fully compressed to stop continuity. In 1997 and later models the button was alot shorter and was more of an alignment issue in the switch housing. Rear brake light switches located in the rear brake line TEE can also fail in the closed circuit condition but extremely rare, usually they fail in an open circuit condition where the brake light is not able to activate. For a free wiring diagram please visit the website below and good luck. Harley Davidson Wiring Diagrams and Schematics

Jul 16, 2012 | 2008 Harley Davidson FLHX Street Glide

1 Answer

Brake light doesnt work with front brake lever


Hi Anonymous, this problem is usually cause by the front brake light switch being out of alignment or the button not retracting all the way keeping your brake light on in a closed circuit, depending on your model year. 1996 and earlier models the right handlebar switch housing had to be tight up against the front brake control housing in order for the front brake light switch button to be fully compressed to stop continuity. In 1997 and later models the button was alot shorter and was more of an alignment issue in the switch housing. Rear brake light switches located in the rear brake line TEE can also fail in the closed circuit condition but extremely rare, usually they fail in an open circuit condition where the brake light is not able to activate. For a free wiring diagram please visit the website below. Good luck and have nice day.

Feb 25, 2012 | Harley Davidson Motorcycles

1 Answer

Front brake light switch on


Hi Terry, this problem is usually cause by the front brake light switch being out of alignment or the button not retracting all the way keeping your brake light on in a closed circuit, depending on your model year. 1996 and earlier models the right handlebar switch housing had to be tight up against the front brake control housing in order for the front brake light switch button to be fully compressed to stop continuity. In 1997 and later models the button was alot shorter and was more of an alignment issue in the switch housing. Rear brake light switches located in the rear brake line TEE can also fail in the closed circuit condition but extremely rare, usually they fail in an open circuit condition where the brake light is not able to activate. For a free wiring diagram please visit the website below. Good luck and have nice day. Harley Davidson Wiring Diagrams and Schematics

Feb 22, 2012 | 2005 Harley Davidson FLHTCUI Electra Glide...

Not finding what you are looking for?
Garden Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Craftsman Garden Experts

Dean Gruber

Level 2 Expert

110 Answers

Roland W VanLue
Roland W VanLue

Level 3 Expert

486 Answers

Dennis Key
Dennis Key

Level 3 Expert

2478 Answers

Are you a Craftsman Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...